Abstract:The aluminum sandwich structures with the trapezoidal corrugated core subjected to underwater impulsive loadings are studied experimentally and numerically in the present study. The blast resistance in terms of dynamic deformation, failure modes and associated mechanisms is evaluated in relation to the load intensity, and the core height under air-backed and water-backed conditions. 3D digital imaging correlation and postmortem analysis are employed to investigate the deformation and failure of individual components, focusing on the effects of loading intensities, core height and loaded condition. The discrepancy in bending stiffness along the x-direction and y-direction results in the asymmetrical propagation of plastic hinges and the crack initiates and propagates along the x-direction. Although the core height affects the response rate and the local tendency of deformation greatly as the impulses increase, the core height has a limited influence on the deflection resistance when the corrugated sandwich panels have the same areal mass. The critical impulse for tearing failure of sandwich with higher core height is much smaller than that of panels with lower core height. Due to the resistance and reaction in backwater column, the transverse deflection does not increase monotonously to the increasing core heights and impulses under water-backed condition. The corrugated sandwich panels suffer significantly smaller inner face deflections than the solid plates of identical mass per area under air-backed condition, while all plates involved show approximate blast-resistance performance under water-backed condition. (C) 2017 Elsevier Ltd. All rights reserved.

Dynamic response and failure of PVC foam core metallic sandwich subjected to underwater impulsive loading

Experimental and numerical investigation on the anti-penetration performance of metallic sandwich plates for marine applications

Dynamic response and failure of carbon/epoxy composite sandwich subjected to underwater impulsive loading

Dynamic Response and Failure of Sandwich Plates with PVC Foam Core Subjected to Impulsive Loading

Experimental Investigation on the Performance of PVC Foam Core Sandwich Panels Subjected to Contact Underwater Explosion

Dynamic Failure of Honeycomb-Core Sandwich Structures Subjected to Underwater Impulsive Loads

Dynamic Response of Aluminum Corrugated Sandwich Subjected to Underwater Impulsive Loading: Experiment and Numerical Modeling

High-velocity impact response of metallic sandwich structures with PVC foam core

Anomalous Dynamic Response and Failure of Sandwich Structures Subjected to Underwater Impulsive Loads

Numerical Simulation on Response of Foam Core Sandwich Panels Subjected to Underwater Explosion

Numerical Study on the Response of Functionally Graded PVC Foam Core Sandwich Panels Subjected to Non-Contact Underwater Explosion

Dynamic Response of Sandwich Panels with Functionally Graded Aluminum Foam Cores Subjected to Underwater Explosion

Experimental investigation on the performance of PVC foam core sandwich panels under air blast loading

Deformation and failure modes of aluminum foam-cored sandwich plates under air-blast loading

Underwater Impulsive Response of a Sandwich Structure with a Multilayer Foam Core

Impulsive Response of Composite Sandwich Structure with Tetrahedral Truss Core

Dynamic fluid-structure interaction of graded foam core sandwich plates to underwater blast

Contact underwater explosion response of metallic sandwich panels with different face-sheet configurations and core materials

Dynamic Response of Clamped Corrugated Sandwich Plates Subjected to Underwater Impulsive Loads

Dynamic Response of Sandwich Panels with Multi-Layered Aluminum Foam/uhmwpe Laminate Cores under Air Blast Loading

Impulsive Resistance of Metallic Honeycomb Sandwich Structures Subjected to Underwater Impulsive Loading