Abstract:Abstract Contour error compensation is an active research topic in five-axis CNC machining, especially in the manufacturing of sculptured surface parts. Nevertheless, current methods are mainly based on the mirror compensation principle, and fail to obtain a desired level of accuracy when processing parts with tight curvature feature. To address this issue, a global toolpath modulation-based contour error pre-compensation method is developed in this paper, which incorporates the error compensation issue into the stage of toolpath planning with a linear analytical solution. In this method, the nominal toolpaths used to machine the products is first expressed by dual B-spline curves, and then the instantaneous tracking error model of each individual drive is built with respect to control points of splined path. Afterward, the satisfaction condition of the spline control points for eliminating the contour error is yielded, which provides a possibility for compensating contour error in a global manner, and the neighbor-dependent coupling issue in error compensation between adjacent cutter location points is capable of being handled as well. On this basis, by applying the least-squares technique, the complicated contour error pre-compensation problem is further converted into a solution of simpler linear equation system. For enhancing its robustness when processing long toolpaths, an adaptive piecewise modulation strategy is also developed. Finally, both experiment and simulation are conducted to validate the proposed method, and the results demonstrate that the proposed method can significantly improve contour precision at low computational costs when compared with the existing pre-compensation method.

Compensation for cutting errors based on open-architectured manufacturing system in sculptured surface cutting

Adaptive compensation of sculptured surface machining errors by open architecture manufacturing system

Error Compensation Based on Surface Reconstruction for Industrial Robot on Two-Dimensional Manifold.

Error Analysis and Compensation Method for Motion Errors of NC Machine Tools under Cutting Loads

Error compensation for machining of sculptured surface based on on-machine measurement and model reconstruction

An accurate surface error optimization for five-axis machining of freeform surfaces

Numerical Solution of Simultaneous Equations Based Geometric Error Compensation for CNC Machine Tools with Workpiece Model Reconstruction

Tool Deflection Error Compensation in Five-Axis Ball-End Milling of Sculptured Surface

Multi-stage error compensation with closed-loop quality control in five-axis flank milling of sculptured surface

An Error Compensation Method for Multi-Axis Machining Based on the Actual Contour Measurement

F Test-Based Automatic Modeling of Single Geometric Error Component for Error Compensation of Five-Axis Machine Tools

A Novel Method of Efficient Machining Error Compensation Based on Nurbs Surface Control Points Reconstruction

Modeling and compensation of comprehensive errors for thin-walled parts machining based on on-machine measurement

Machining error compensation of free-form surfaces by combination of ordinary kriging method and mirror compensation method

Improving the Accuracy of Machined Parametric Surfaces Using Cutting Force Synthesis and Surface Offset Techniques

An adaptive approach to error compensation by on-machine measurement for precision machining of thin-walled blade

Research on Geometric Error Modeling and Error Compensation Technique of Horizontal Machine Tools

Global toolpath modulation–based contour error pre-compensation for multi-axis CNC machining

Tool deflection and geometrical error compensation by tool path modification

A Closed-Loop Error Compensation Method for Robotic Flank Milling

Error Compensation for Machining of Large Thin-Walled Part with Sculptured Surface Based on On-Machine Measurement