Abstract:To study the temperature distribution characteristics and evolution law of underground lignite gasifiers, a three-dimensional heat conduction model of underground lignite gasification was constructed. Moreover, the effects of different coal thicknesses, advance speeds of the flame working face, and surrounding rock types on the gasifier were analyzed. The results show that with the increase in the coal thickness, the transfer range and distance of temperature in the roof, floor, and coal seam gradually increase, as does the coal quantity in the three zones. The heat loss rate of the gasifier decreased gradually with the coal seam thickness. When the advance speed of the flame working face is 0.5 m/d, the ideal gasification coal thickness range of lignite is 2.5-17.5 m. With the increase in the gasification rate, the maximum transfer distance of temperature to the roof and floor, the average temperature of the gasifier, and the coal quantity of the three zones gradually increase. Conversely, the coal thickness corresponding to the intersection of the coal quantity of the oxidation and reduction zones and the heat loss rate of the gasifier gradually decrease. When the coal seam below 2.5 m is gasified, the gasification rate can be increased appropriately. When the coal seam is above 13 m, increasing the gasification rate will make the coal quantity in the oxidation zone close to or even higher than that in the reduction zone. Regarding the surrounding rock types comprising a combination of siltstone, mudstone, sandy mudstone, and fine sandstone, the most favorable roof and floor type for underground coal gasification is the combination of fine sandstone and sandy mudstone (without considering the sealing and mechanical properties). These results provide important theoretical support for the industrialization of underground coal gasification.

Heat and Mass Transfer inside a Vertical Pipe of Quench Chamber in Coal Gasifier

NUMERICAL SIMULATION ON TURBULENT FLOW AND HEAT TRANSFER OF VERTICAL PIPE IN QUENCH CHAMBER OF COAL GASIFIER

Two-Fluid Model for Quench Chamber of Coal Gasifier

Heat & Mass Transfer Research on Descending Pipe of Quench Chamber in Texaco Coal Gasifier

Numerical Simulation of a Retrofitted Quench Chamber of a Coal Gasifier

Experimental Study and Numerical Simulation of Heat and Mass Transfer in Scrubbing-Cooling Pipe

Numerical Simulation Of Flow And Heat Transfer In Connection Of Gasifier To The Radiant Syngas Cooler

Study of the Flow and Heat Transfer Characters in the Tube Sheet Cooling Chamber of a Fire Tube Waste Heat Boiler

Thermodynamic Analysis And Numerical Simulation Of Vertical Reducing Helical Coiled Fire-Tube Waste Heat Boiler In Gasification

Modeling of Multiphase Flow and Heat Transfer in Radiant Syngas Cooler of an Entrained-Flow Coal Gasification

A Dynamic Heat Transfer Model to Estimate the Flue Gas Temperature in the Horizontal Flue of the Coal-Fired Utility Boiler

Simulation Study on Heat Transfer Characteristics of Coal Synthesis Gas Installations

Three-dimensional Numerical Simulation of Entrained-Flow Gasifier and Influence of Coal Distribution at the Inlet

The application of thermal-calculation methods in the design and syngas prediction of entrained-flow coal gasifiers

Numerical simulation of dense-phase pneumatic conveying in vertical pipe for gasifier

Numerical Simulation for Pulverized Coal Gasifier’ Heating Nozzle and Slag Building Model

Numerical simulation of a new two-stage dry feed gasifier for double-high coal

Numerical Analysis for Coal Gasification Performance in a Lab-Scale Gasifier: Effects of the Wall Temperature and Oxygen/Coal Ratio

Modeling and comparison of different syngas cooling types for entrained-flow gasifier

Modeling of Hot Gas Flow Through a Feed Stream Within a Horizontal Pipe

Numerical Simulation of the Temperature Distribution and Evolution Law of Underground Lignite Gasification