Abstract:In the circulating fluidized bed (CFB), the non-uniform mesoscale structure formed by the particle clustering effect causes a substantial decrease in the gas-solid drag. Since the degree of particle clustering varies with operating conditions, an accurate drag model needs to be universal in different heterogeneous flow conditions. In this study, the relationships between the Ψ factor in clusters' solid holdup model that characterizes the flow non-uniformity and the operating parameters of CFB (including slip velocity Reynolds number, Re*, bed-averaged solid volume fraction, εs,bed, and solid mass circulation rate, Gs) are established. It improves the adaptability of the QC-EMMS drag model under different working conditions. In previous research, we established two types of models that related Ψ factor to Re* and εs,bed respectively. However, there exists a problem of high dispersion of points, indicating that the selected parameters cannot fully describe the flow non-uniformity. Therefore, Gs is reintroduced to modify the two types of models. The results show that the prediction accuracy of the modified models is improved and the relative error is <10%, indicating that the non-uniform factor Ψ has a strong correlation with Gs. In addition, the quantitative relation between Re*, εs,bed, and Gs is derived from modified models, and the trend of relation is highly consistent with the fluidization diagram proposed by Yerushalmi J., which verifies the accuracy of modified models. Finally, numerical simulation of typical CFB cases proves the adaptability of the modified models in wide operating conditions of fluidization.

Development and Validation of Cluster and EMMS Drag Model

Improvement of EMMS Drag Model for Heterogeneous Gas–solid Flows Based on Cluster Modeling

Development and Validation of Filtered Drag Models for Fluidization of Low-Density Geldart A Particles

Influence of meso-scale structures on drag in gas–solid fluidized beds

Modeling of Drag with the Eulerian Approach and EMMS Theory for Heterogeneous Dense Gas–solid Two-Phase Flow

QL-EMMS drag model & its revision for fluidized dense gas-solid two-phase flow

Research on the Generalization Issue of the Heterogeneous QC-EMMS Drag Model for Gas-Solid Fluidization

Numerical Simulations of a Bubbling Fluidized Bed Reactor with an Energy Minimization Multiscale Bubble Based Model: Effect of the Mesoscale

Cluster Structure-Dependent Drag Model for Liquid–solid Circulating Fluidized Bed

THE KEY SCIENTIFIC PROBLEMS IN THE EULERIAN MODELING OF LARGE-SCALE MULTI-PHASE FLOWS——DRAG MODEL

Developing Heterogeneous Drag Model for Fluidization Process and Its Generalization

Hydrodynamics of Gas–solid Risers Using Cluster Structure-Dependent Drag Model

Modeling of Cluster Structure-Dependent Drag with Eulerian Approach for Circulating Fluidized Beds

Clusters intermittent simulations using dynamic cluster structure-dependent drag model in gas-particles risers

A Cluster Structure-Dependent Drag Coefficient Model Applied to Risers

A Dynamic Cluster Structure-Dependent Drag Coefficient Model Applied to Gas-Solid Risers

A generalized drag Law for heterogeneous gas-solid flows in fluidized beds

CFD simulation of gas-solid flow with a cluster structure-dependent drag coefficient model in circulating fluidized beds

Prediction of Flow Behavior of Liquid and Particles in Liquid-Solid Risers with Modified Cluster Structure-Dependent Drag Method

Theoretical model of drag between gas and solid phase

Extension of Cluster-Structure Dependent Drag Model to Simulation of Riser with Geldart B Particles