Abstract:238U regarded as not only one of the important materials in the design of advanced nuclear energy system,but also significant components of the nuclear fuel cycle,especially constitutes more than 90％in power reactor.Improving the accuracy of evaluated neutron data for 238 U is essential for the design of reactor and nuclear devices,and fusion neutron integral experiment is one of the effective means to check the accuracy of nuclear data.The idea of this approach is to find out differences and deficiencies between measurement and prediction of different evaluated libraries,which can provide guidance for the adjustment of evaluated data.The leakage neutron spectra were measured at angles of 60° and 120° after the interaction of D-D neutrons with 238 U samples in differ-ent sizes by time-of-flight method using the shielding integral facility of China Institute of Atomic Energy.The samples were rectangular slabs with a 30 cm square base and 3,6 and 9 cm in thicknesses.A φ5.08 cm×2.54 cm BC-501A liquid scintillator was used to detect neutron in the measurement,and the gamma background can be removed by neu-tron-gamma discrimination.The leakage neutron spectra were simulated by Monte Carlo code using 238 U data from the CENDL-3.2,ENDF/B-Ⅷ.0,JENDL-5.0 and JEFF-3.3 evaluated nuclear data libraries.The energy,angular flux and pulsed time distributions of source neutron were described carefully in the process of simulation,and the parame-ters of target structure material and detector efficiency were all taken into account.By comparing the calculated results with the experimental results,the shortcoming of 238 U data in CENDL-3.2 library and the need for improvement were analyzed.The results show that the calculated result of CENDL-3.2 library in the fission reaction energy range is in good agreement with experimental result,but greatly overestimates in the elastic scattering energy range both at 60° and 120°,especially at 120°,there is also significant underestimation in the mixed energy range of 1.5-2.5 MeV for fission reaction and discrete level inelastic scattering.

Absolute Fission Rate Measurement of 238U Induced by 14 MeV Neutrons Penetrated Composite Material

Measurement and Analysis of Fission Rates in a Spherical Mockup of Uranium and Polyethylene

Determination of Cross Sections for The238u(n,3n)

Fission Product Yield Measurement of 238 U Induced by 1.4-5 MeV Neutrons

Study on Technique for Measuring Reflection Neutrons Byuranium Fission Chamber

Measurement of the U236(n,f) Cross Section for Neutron Energies from 0.4 MeV to 40 MeV from the Back-Streaming White Neutron Beam at the China Spallation Neutron Source

Recent progress of neutronics experiments

Influence of thermal and resonance neutron on fast neutron flux measurement by Pu-239 fission chamber

Measurement and Analysis of Fission Rate in Alternate Depleted Uranium/Polyethylene Shells

Fission Cross-Section Measurement for Xe135m And

Measurement of the U-238/U-235 Fission Cross Section Ratio at CSNS – Back-n WNS

Geant4 Simulation of 238u(n,f) Reaction Induced by D-T Neutron Source

Study on Technique for Measuring Neutrons by Measuring the Γ Rays from Fission Fragments

Measurement of the <SUP>236,238</SUP>U(n,f) cross sections from the threshold to 200 MeV at CSNS Back-n

Fission cross-section measurement for Xe135m and Xe135g in U238 reaction induced by 14MeV D-T neutrons

Calculation and Simulation Onthefission Products for Neutron-Induced 239pu Fission Based on Potential-driving Model

Measurement and Simulation of the Leakage Neutron Spectra from Fe Spheres Bombarded with 14 MeV Neutrons

The Basic Simulation Study on Uranium Isotope Analysis Through Active Neutron Counting

Nuclear emulsion measuring the prompt fission neutron spectrum of 238U induced by 2.8 MeV neutrons

Measurement of the U-236,U-238(n,f) cross sections from the threshold to 200 MeV at CSNS Back-n

Study on Shielding Benchmark Experiment of 238U Sample with D-D Neutrons