Study on Palm Oil Micro-encapsulation

周鹏,张晓洁,郑为完,熊华

DOI: https://doi.org/10.3321/j.issn:1003-7969.2002.01.019

2002-01-01

Abstract:In this paper,a microencapsulated palm oil was made by spray drying with malt dextrin and sodium caseinate as wall material,glyceryl monostearate and sucrose esters of fatty acids as emulsifier.A optimum formula was got.The resulting microencapsulation has good solublility,flowability and emulsibility.

What problem does this paper attempt to address?

Microencapsulation of walnut oil using starch octenyisuccinate

李艳,郝艳宾,王克建,陈芳,胡小松

DOI: https://doi.org/10.3969/j.issn.1002-0306.2006.04.037

2006-01-01

Abstract:In this study, starch octenylsuccinate HI-CAP100 was used as the wall material to prepare the microencapsulated walnut oil by spray-drying method to avoid oxidation of the oil, and the structure of the products was observed with scanning electron microscope (SEM). The result showed that microencapsulation was in good structure after spray drying. The technological parameters were as follows: starch octenylsuccinate HI-CAP100 and malt dextrin was in proportion of 0.4∶0.6 as the wall materials, the oil loading was 40%, the dry solid of the emulsion was 40%, homogenization at 35～40MPa for 2～3times, the temperatures of inlet and outlet wind were 190℃ and 90℃, respectively.
Physicochemical Characterization and Oxidative Stability of Microencapsulated Crude Palm Oil by Spray Drying

Camila Duarte Ferreira,Elaine Janaína Linhares da Conceição,Bruna Aparecida Souza Machado,Vanessa Stahl Hermes,Alessandro de Oliveira Rios,Janice Izabel Druzian,Itaciara Larroza Nunes

DOI: https://doi.org/10.1007/s11947-015-1603-z

2015-10-01

Food and Bioprocess Technology

Abstract:The aim of this study was to evaluate the possibility of crude palm oil microencapsulation by spray drying to preserve the oil’s characteristics such as carotenoid content, antioxidant activity, fatty acid, and peroxide value and improve its technological process as thermal stability and oxidative stability for possible use as a food fortifier. Capsules were generated from emulsions with different wall material combinations and then dried at 180 °C. The best wall material combination was cassava starch with gum arabic because it provided good encapsulation efficiency and yield and moisture content. Thermogravimetric analysis and differential scanning calorimetry analyses indicated that the microcapsules had satisfactory thermal stability. The fatty acid profile and color parameters did not change with oil microencapsulation. However, total carotenoids, antioxidant activity, and peroxide value changed with encapsulation. In conclusion, crude palm oil remains an important source of bioactive compounds, such as pro-vitamin A, which have various functions in the body and these microcapsules can be used on food industry fortification.

food science & technology
Preparation and Quality Evaluation of Flat Almond Oil Micro-Encapsulation

张莉,杨有林,张靖,张志琪

DOI: https://doi.org/10.13386/j.issn1002-0306.2012.05.031

2012-01-01

Abstract:Taking konjac glucomannan（KGM） and soy protein isolate（SPI） as materials of wall and glycerol monostearate（GMS） as emulsifier,the micro-encapsulation of flat almond oil was prepared by spray-drying method.The prescription of micro-encapsules was optimized with response surface methodology（RSM）,and the micro-encapsulation efficiency,anti-oxidation and microstructure of flat almond oil micro-encapsules was investigated.The result indicated that the optimal composition of the micro-encapsules was as follows：almond oil 27%,KGM 2.8%,GMS 1.8%,SPI 68.4%.The micro-encapsulation efficiency of the production was 93.9%.And the products of almond oil micro-encapsule were in good antioxidation,smooth surface and uniform particle sizes.
Microencapsulation of blend oil with rice dregs protein hydrolysate used as a wall material

LI Xiang,XIONG Hua,LI Wei,SHI Suwei,PENG Diwei,XU Jingshui

2010-01-01

Abstract:The rice dregs protein hydrolysate was used as a wall material,and the microencapsulated blend oil rich in medium chain fatty acid was prepared by spray-drying.The emulsion system and the spray-drying process parameters were determined.The optimum conditions were as follows:core materials content 25%,mass ratio of rice dregs protein hydrolysate to maltodextrin 5∶5,compound emulsifier dosage(Tween-80,glyceryl monostearate and sucrose ester,which mass ratio was 16∶81∶3) 3.0%,CMC 0.45%,xanthan gum 0.1%,total solid 20%,emulsifying 20 min at 45℃,homogenization with 10 MPa for two times,outlet temperature 90℃ of spray-drying.Under the optimum conditions,the final product had a good microencapsulated efficiency(83.6%).
Study on the Microencapsulation of Walnut Oil

王文琼,包怡红,王芳,王硕

2013-01-01

Abstract:Modification of whey protein isolate and gum arabic were used as wall material which could form a firm by complex coacervation at the surface of the walnut oil. The microcapsules of walnut oil were immobilized by transglutaminase( TG- H) . The final products were dehydrated by freeze-drying. The preparation conditions and immobilization conditions were evaluated by the oil-in-rate of microcapsules. The results indicated that the optimum preparation conditions were as follows:walnut oil dosage 0.6mL,modified whey protein isolate 20mL,gum Arabic 6% ,pH4.5,stirring speed 300r /min. The optimal immobilization conditions:immobilization pH6.0,the immobilization time of 10h,the immobilization temperature of 10℃,transglutaminase enzyme dosage of 25U /g of gum arabic .The final oil-in-rate could reach 84.15%.In the storage process,the microcapsules could delay walnut oil peroxide value increase.
Effect of maltodextrin combination with gum arabic and whey protein isolate on the microencapsulation of gurum seed oil using a spray-drying method

Emad Karrar,Amer Ali Mahdi,Sujitraj Sheth,Isam A Mohamed Ahmed,Muhammad Faisal Manzoor,Wei Wei,Xingguo Wang,Isam A. Mohamed Ahmed

DOI: https://doi.org/10.1016/j.ijbiomac.2020.12.045

IF: 8.2

2021-02-01

International Journal of Biological Macromolecules

Abstract:<p>This study aimed to evaluate the potential of maltodextrin (MD) combination with gum arabic (GA), and whey protein isolate (WPI) on the microencapsulation of gurum seeds oil by a spray-drying method. Three formulations of protein-based (PB) (WPI: MD, 2:1), carbohydrate-based (CHOB) (GA: MD, 2:1), and mixed (MIX) (WPI: GA: MD, 1:1:1) wall materials were designed. The moisture content and water activity were in the range of 1.65–3.67% and 0.17–0.31, respectively, which is suitable for long-term storage. The best results were achieved when gurum seed oil was microencapsulated with carbohydrate-based, where it had the highest microencapsulation yield (92.80%) and microencapsulation efficiency (97.38%). Carbohydrate-based showed the highest relative crystallinity (32.25%) and the temperature of the glass transition (58.20 °C). FT-IR revealed that the oil was well encapsulated in the microcapsules. SEM of microcapsules showed spherical shapes without any apparent cracking on the surfaces. During the oxidative stability study, carbohydrate-based microencapsulation was the wall material that best protected the active materials against lipid oxidation.</p>

polymer science,biochemistry & molecular biology,chemistry, applied
Study on Microencapsulation of Mustard Oil by Spray Drying

LI Su-yun,LI Xing-ke,ZHANG Hua,YANG Ying-li

DOI: https://doi.org/10.3969/j.issn.1000-9973.2013.01.019

2013-01-01

Abstract:The mustard oil is extracted from mustard seeds.Microcapsules are experimented by taking mustard oil as core material,arabic gum and maltodextrin as wall materials,then by emulsion,uniform and spray drying.The optimum process conditions are: arabic gum∶maltodextrin is 2∶8,core material∶wall material=1∶3 and solid content of 35%,homogeneous pressure of 26 MPa,feeding speed of 15 r/min,inlet air temperature of 235 ℃,outlet air temperature of 90 ℃,and embedding rate of 93.1%.
The Preparation and Properties of Orange Oil Microencapsulation

熊月琴,何小维,黄强,李泽洪,叶之壮

DOI: https://doi.org/10.13684/j.cnki.spkj.2011.06.027

IF: 2.602

2011-01-01

Food Science and Technology

Abstract:In this study,octenylsuccinate starch HI-CAP100 was used as the wall materials to microencapsulate orange oil by spray drying method,the products were observed by scanning electron microscope and differential scanning calorimetry,The results showed when the technological parameters were as follows:starch octenylsuccinate and malt dextrin was in proportion of 2:1 as the wall material,the oil loading was 30%,the dry solid of the emulsion was 40%,the temperature of inlet was200 ℃,the microencapsulation efficiency is 99.4%,the glass transition temperature is 116.63 ℃.Microcapsule particles is spherical,with smooth surface and no cracks.
A Study of Microencapsulation in Essence(ⅰ)select Wall Materials of Preparing the Microencapsulation for Fat-Soluble Flavoring

Jin-song LIAO,Jun-ru QI,Bi-cheng CAI,Hu-quan ZHOU

DOI: https://doi.org/10.3969/j.issn.1006-2513.2006.04.004

2006-01-01

Abstract:The various factors that had effects on the microencapsulation of essence including selection of wall materials,formulation of compound wall materials,proportion of core-material and wall material,inlet concentration of emulsion etc.Experimental result show that the proportion of modified starch and malt dextrin is1.5∶1,the content of gum arabic is 1%,the content of wall-materials is 40%,proportion of core-material and wall-material is 1∶2.And the material liquid property(mainly is viscosity and emulsify stability) is main factor that affects the microencapsulation efficiency.
EFFECT OF PALM OIL MICROEMULSIONS ON THE QUALITY OF MANTOU

王春,程娟,陈洁,段秋虹

DOI: https://doi.org/10.16433/j.cnki.issn1673-2383.2010.03.003

2010-01-01

Abstract:By selecting palm oil as the oil phase and distilled water as the water phase,the article prepared palm oil microemulsion by using glyceryl mono and distearate(GMS),sodium stearoyl lactate(SSL),tripolyglycerol monostearates(PGE) and sorbitan monostearated(S-60) as the composite emulsifier and using glycerol as cosurfactant.The microemulsion was added into Mantou according to a fixed ratio,and then the study determined the hardness and the elasticity of the Mantou stored for different time periods.The results show that the microemulsion contains emulsifier 7.5%,glycerol 20% and water 10%,and the Mantou has the smallest hardness and the largest elasticity when stored for 48 h.Accordingly,the microemulsion has great effect on the storage quality of the Mantou.
Buttermilk as a wall material for microencapsulation of omega-3 oils by spray drying

Yuyu Zhang,Xiaoyang Pang,Shuwen Zhang,Liu Liu,Changlu Ma,Jing Lu,Jiaping Lyu

DOI: https://doi.org/10.1016/j.lwt.2020.109320

IF: 6.056

2020-06-01

LWT

Abstract:<p>Algal oil is rich in docosahexaenoic acid, which is an omega-3 polyunsaturated fatty acid. However, unsaturated bonds make docosahexaenoic acid vulnerable to oxidation. This work aimed to microencapsulate algal oil using buttermilk, alone or in combination with maltodextrin, as a wall material to protect it from oxidation and improve its stability by applying the spray drying method. Our study found that an increase in microcapsule oil content increased in microcapsule particle size, dispersion time and peroxide value and a decrease in microcapsule moisture content, bulk density and encapsulation efficiency. Moreover, the addition of different proportions of maltodextrin into the microcapsules increased the moisture content and particle size and decreased the encapsulation efficiency and oxidation stability. 33.3% oil and 66.7% buttermilk powder microcapsule and obtained the highest encapsulation efficiency. The surface showed a regular and smooth spherical shape. 33.3% oil and 33.3% buttermilk powder mixed with 33.3% maltodextrin microcapsule achieved good encapsulation efficiency and the best stability during storage. Structures such as the milk fat globule membrane were also observed in both types of microcapsules.</p>
Facile microencapsulation of olive oil in porous starch granules: Fabrication, characterization, and oxidative stability

Miao Lei,Fang-Cheng Jiang,Jie Cai,Si Hu,Rui Zhou,Gang Liu,Yue-Hui Wang,Hai-Bo Wang,Jing-Ren He,Xin-Gao Xiong

DOI: https://doi.org/10.1016/j.ijbiomac.2018.01.051

IF: 8.2

2018-01-01

International Journal of Biological Macromolecules

Abstract:In this study, starch with porous structures derived from purple sweet potato was prepared and used as a food-grade polymer for the microencapsulation of olive oil. The optimal reaction conditions for preparing porous starch were determined to improve its adsorption capacity as effective microcapsule-wall materials. Olive oil was then impregnated in microspheres, and loading ratio was optimized by investigating the restrictive factors, including the mass ratio of olive oil to porous starch, as well as the embedding temperature and time. The presence of olive oil in the starch matrix was confirmed by SEM, FTIR, and TGA. Results demonstrated that the porous starch-based microencapsulation exhibit a stable olive oil loading ratio and a significant improvement in oxidative stability compared with free olive oil. The newly-proposed process used in this work was easy to scale up for developing a new and attractive method for oil protection in the food industry.
Preparation of walnut oil microcapsules employing soybean protein isolate and maltodextrin with enhanced oxidation stability of walnut oil

Dan Zhou,Yun Pan,Jing Ye,Jingfu Jia,Jinfang Ma,Fahuan Ge

DOI: https://doi.org/10.1016/j.lwt.2017.05.029

2017-01-01

Abstract:This study is aimed to enhance the stability of walnut oil by microencapsulation using soybean protein isolate (SPI) and maltodextrin (MD) as wall materials. Walnut oil microcapsules were successfully prepared by spray drying method and the encapsulation efficiency (EE) was 72.2% under the optimal conditions. The effects of the wall materials concentrations, the ratio of SPI to MD, and the ratio of oil to wall materials on the EE were examined. The structure of microcapsules was characterized by various physicochemical techniques and it confirmed the walnut oil was successfully microencapsulated. The microencapsulated walnut oil showed lower oxidation values in comparison with unencapsulated oil, highlighting a protective effect of the antioxidant. The results revealed that the oxidation stability of walnut oil was enhanced significantly by microencapsulation. Microcapsules showed good application prospect for walnut oil in food industries.
Preparation and Oxidative Stability of Microcapsules Containing Pine Nut Oil by Complex Coacervation

Yang GUO,Yihong BAO,Nan ZHAO

DOI: https://doi.org/10.7506/spkx1002-6630-201718036

2017-01-01

Abstract:Pine nut oil microcapsules were successfully prepared using gelatin and arabic gum as wall materials by complex coacervation method. The influences of the ratio of gelatin to arabic gum (V/V), the mass ratio of core to wall material, the mass fraction of wall materials, and agglomeration time on microencapsulation efficiency were determined. These processing parameters were optimized using orthogonal array design. Meanwhile, the physicochemical properties of the microcapsules were evaluated and the effect of temperature on their oxidative stability was also analyzed. The highest microencapsulation efficiency of 87.23% was achieved under the optimized conditions: gelatin/arabic gum ratio 2:1, core/wall ratio 2:3, mass fraction of wall materials 2%, and agglomeration time 50 min. The moisture content and solubility of pine nut oil microcapsules was 5.1% and 98.09%, respectively. The interaction between gelatin and arabic gum was analyzed by Fourier transform infrared (FT-IR) spectroscopy, and field emission scanning electron microscopy (FESEM). DSC analysis indicated that complete structure of microcapsules could exist stably at room temperature. The oxidative stability of encapsulated pine nut oil revealed that microencapsulation could enhance the storage stability, prolong the storage period of pine nut oil.
Study on Microencapsulation of Grape Seed Oil with Porous Starch

Li-na XU,Hai-zhou DONG,Chuan-fu LIU,Xu-xia ZHANG

DOI: https://doi.org/10.3969/j.issn.1008-9578.2009.02.008

2009-01-01

Abstract:Grape seed oil has higher content of unsaturated fatty acid,which,specially,contains more than75.8%linoleic acid.For avoiding oxidation of the oil,we used porous starch as the wall material,on the basis of the single factor experiment,by the experimental method of quadratic general rotary design,the microencapsulation parameters were studied,we obtained a mathemetic model of microencapsulation,also carried out the grape seed oil by oxidation experiment.The result showed that,the proportion of grape seed oil to wall materials was 2.9∶1,the time of microencapsulation was 58min,the temperature of microencapsulation was 58℃.Under the optimal condition,the rate of grape seed oil embeded by porous starch was 30.31%,meanwhile,the microencapsulation in good antioxidation.
The Study on the Preparation of Multi-Film Microencapsulated Fish Oil

韩玉谦,蒋新,李钐,冯晓梅,管华诗

DOI: https://doi.org/10.3321/j.issn:1002-6630.2004.12.026

2004-01-01

Abstract:In this paper ,the multi-film microencapsulation of fish oil was made by the spray drying technique. The effects of the group and the proportion of the wall materials to the efficiency of microencapsulation were discussed. The optium technology of spray drying was determined by orthogenesis test.
Progress of application of microencapsulation technology in polyunsaturated fatty acids

ZHANG Jia-Yi,DU Bing,XIE Lan-Hua,CHEN Jun,CHEN Jia,YANG Gong-Ming

DOI: https://doi.org/10.19812/j.cnki.jfsq11-5956/ts.2013.05.008

2013-01-01

Abstract:Polyunsaturated fatty acids are essential nutrients for the growth and health of human. However,these fatty acids are easily to be oxidized and have a bad smell. Thus, it is necessary to solve these problems using microencapsulation embedding technology. In this paper, spray drying, complex coacervation method,sharp whole method and freeze-drying method in the preparation of highly unsaturated fat powder were reviewed, and new types of wall materials, glass microcapsules, and nano-microcapsules in polyunsaturated fatty acids microencapsulation were introduced also. The result showed that microencapsulation of polyunsaturated fatty acids in the food industry had good prospects for development.
Microencapsulation of Eucommia Seed Oil by Spray Drying

Ma Chengjin,Ma Meihu,Huang Qun,Zhang Yongkang,Yao Maojun

2008-01-01

Abstract:Using arabic gum and malt dextrin as wall material of microcapsules,the microencapsulation technology of eucommia seed oil was studied in this work.The determined optimal formula for microcapsules of the oil is as follows: arabic gum to malt dextrin is 1∶1,ratio of core to wall is 2∶3,and the percent ration of material and water is 25%(W/V).The optimum technology conditions of spray drying obtained by experiments are as follows: the temperature of entering wind is 180 ℃,the temperature of exporting wind is 80 ℃,and the homogenization pressure is 35 MPa.The microencapsulation efficiency of products is 84%～86%.The oxidation stability of the oil is enhanced obviously by the microencapsulation.With the optimal formula and technology conditions the produced microcapsules are spherical,smooth and uniform.
Studies on Microencapsulation of Lycopene

Xiao-yan ZHAO,Zuo-shan FENG,Fu-sheng CHEN

DOI: https://doi.org/10.3969/j.issn.1007-7561.2006.04.019

2006-01-01

Abstract:Because of unstability of Lycopene,we studied mircoencapsulation of Lycopene to improve its stability for light,heat,oxygen etc.And by the experiment,we determined the optimum way of microencapsulation and relevant technological conditions: the optimum way was the spray freezing method,the best wall material was compound films,ratio of wall material and core material was 2:1,and emusifier concentration was 0.3%,material and liquid temperature was 45℃,spray pressure was 3mPa,microencapsulation rate of Lycopene was 79.60%.High performance liquid chromatography(HPLC) was used to identify the quantitative analysis of microencapsulated lycopene,its content is 57.48%.
Optimization of Microencapsulation of Fish Oil with Gum Arabic/Casein/Beta-Cyclodextrin Mixtures by Spray Drying

Junjie Li,Shanbai Xiong,Fang Wang,Joe M. Regenstein,Ru Liu

DOI: https://doi.org/10.1111/1750-3841.12928

IF: 3.9

2015-01-01

Journal of Food Science

Abstract:Fish oil was encapsulated with gum arabic/casein/beta-cyclodextrin mixtures using spray drying. The processing parameters (solids concentration of the barrier solutions, ratio of oil to barrier materials, emulsifying temperature, and air inlet temperature) were optimized based on emulsion viscosity, emulsion stability, encapsulation efficiency, and yield. A suitable viscosity and high emulsion stability could increase encapsulation efficiency and yield. Encapsulation efficiency and yield were significantly affected by all the 4 parameters. Based on the results of orthogonal experiments, encapsulation efficiency and yield reached a maximum of 79.6% and 55.6%, respectively, at the optimal condition: solids concentration of 35%, ratios of oil to barrier materials of 3:7, emulsifying temperature of 55 °C, and air inlet temperature of 220 °C. Scanning electron microscopy analysis showed that fish oil microcapsules were nearly spherical with a smooth surface with droplet size ranging from 1 to 10 μm.

Study on Palm Oil Micro-encapsulation

Microencapsulation of walnut oil using starch octenyisuccinate

Physicochemical Characterization and Oxidative Stability of Microencapsulated Crude Palm Oil by Spray Drying

Preparation and Quality Evaluation of Flat Almond Oil Micro-Encapsulation

Microencapsulation of blend oil with rice dregs protein hydrolysate used as a wall material

Study on the Microencapsulation of Walnut Oil

Effect of maltodextrin combination with gum arabic and whey protein isolate on the microencapsulation of gurum seed oil using a spray-drying method

Study on Microencapsulation of Mustard Oil by Spray Drying

The Preparation and Properties of Orange Oil Microencapsulation

A Study of Microencapsulation in Essence(ⅰ)select Wall Materials of Preparing the Microencapsulation for Fat-Soluble Flavoring

EFFECT OF PALM OIL MICROEMULSIONS ON THE QUALITY OF MANTOU

Buttermilk as a wall material for microencapsulation of omega-3 oils by spray drying

Facile microencapsulation of olive oil in porous starch granules: Fabrication, characterization, and oxidative stability

Preparation of walnut oil microcapsules employing soybean protein isolate and maltodextrin with enhanced oxidation stability of walnut oil

Preparation and Oxidative Stability of Microcapsules Containing Pine Nut Oil by Complex Coacervation

Study on Microencapsulation of Grape Seed Oil with Porous Starch

The Study on the Preparation of Multi-Film Microencapsulated Fish Oil

Progress of application of microencapsulation technology in polyunsaturated fatty acids

Microencapsulation of Eucommia Seed Oil by Spray Drying

Studies on Microencapsulation of Lycopene

Optimization of Microencapsulation of Fish Oil with Gum Arabic/Casein/Beta-Cyclodextrin Mixtures by Spray Drying