Research on the deformation mechanism and ACC control technology of gob‐side roadway in an extra‐thick coal seam with varying thickness
Renliang Shan,Shuai Liu,Hailong Wang,Zhaolong Li,Pengcheng Huang,Haoyu Dou
DOI: https://doi.org/10.1002/ese3.1720
IF: 4.0349
2024-03-08
Energy Science & Engineering
Abstract:As the thickness of the coal seam increases, the ratio and deflection angle of principal stress in the coal seam near the gob will gradually increase, and the range of plastic area will gradually expand, leading to intensified deformation and damage to the gob‐side roadway. Therefore, more effective and advanced support methods are needed. To solve this problem, a control strategy and support scheme based on a new support structure called "Anchor Cable with C‐shaped Tube" is proposed, which has achieved better deformation control effect in on‐site application. To improve the extraction of coal resources, gob‐side entry driving is gradually being promoted and applied. However, as the thickness of the coal seam increases, the deformation control of the roadway becomes more difficult. Aiming at this problem, a combination of theoretical calculation, numerical simulation, and field test was used to analyze the aspects of the stress environment, surrounding rock properties, and support forms. The phenomenon and mechanization of intensified deformation and failure of roadway with increasing coal seam thickness were revealed. The specific results include: (1) The ratio of principal stress at the excavation position controls the maximum failure depth of roadway, and the direction of principal stress determines the location of the maximum failure depth; (2) As the thickness of the coal seam increases, the properties of the surrounding rock at the excavation position decrease, the principal stress ratio increases, and the deflection angle of the principal stress increases, which lead to an intensification of the deformation and failure of the roadway. Based on the deformation and failure characteristics of the roadway and the shortcomings of the original support form, a control strategy and support scheme based on a new support structure called "Anchor Cable with C‐shaped Tube" is proposed, which has achieved better deformation control effect in on‐site application.
energy & fuels