Abstract:Abstract In this paper, we propose a thermal wind speed sensor Verilog-A model with thermal-fluid-electric hybrid characteristics. Because the structure of the thermal wind sensor and the interface circuit chip are designed separately, which cannot effectively carry out MEMS-IC (integrated circuit) co-simulation, the overall performance of the sensor and interface circuit chip is prone to large deviation. At the same time, the separation of MEMS structure and IC design process leads to long product development cycle and high cost. This paper proposes an improved simulation model by analyzing the behavior characteristics of the thermal wind speed sensor. The simulation model consists of 11 thermistors, 3 capacitors, a voltage-controlled voltage source, and a voltage-controlled current source. The Taylor series expansion of the differential equation of heat conduction is carried out, and then the thermistor and capacitor networks are established according to the corresponding relationship between the thermal parameters and the electrical parameters, including the thermal conduction unit, the convection unit and the heat capacity in the chip. The model fully considers the effects of various physical effects and parasitic effects, and is implemented using the hardware description language Verilog-A. The sensor and interface circuit can be simulated simultaneously to optimize the circuit design. It is beneficial to the integration of sensors and interface circuit, reducing the number of tape-outs, increasing the success rate, and reducing costs. The consistency between the simulation results and the experimental curves verified the correctness of the macro model. The behavior characteristics of constant power (CP) and constant temperature heating were described. In CP mode, the output voltage error is less than ± 6.5%, the chip temperature error is less than 4.0%. The presented modeling approach can be the basis for the development of complete MEMS-IC design technology library of thermal wind speed sensor, aiming at optimum designs of integrated thermal wind speed sensor.

Simulation of Integrated Wind Flow Sensor System on a Chip

Research Status of Macro-Modeling of MEMS Devices for Systems Level Simulations

A New Modeling Method of MEMS System's Noise

Efficient system-level simulations of thermal wind sensors considering environmental factors

Fluid-Solid Coupling Simulation of MEMS Thermal Wind Sensor

An efficient macro model for CMOS-MEMS thermal wind speed sensor

System-Level Optimization of MEMS Thermal Wind Sensor Based on the Co-Simulation of Macromodel and Board-Level Interface Circuits

An Efficient Macromodel Extraction Strategy for Packaged MEMS Thermal Wind Sensor Considering Multiphysics

The Fabrication and Integration of a Novel Shear Stress Sensor Array and Its Wind Tunnel Test

MEMS nodal modeling and its application to design of integrated microsystems

COMPUTER-AIDED DESIGN AND SIMULATION FOR MEMS DEVICES

Computer Simulation and CAD of MEMS and Microsystems

Simulation and optimization of a micro flow sensor

A System-Level Package of MEMS Thermal Flow Sensor

Design and Optimization of Interface Circuits of MEMS Thermal Wind Speed Sensor Based on a Macro Model

System-Level Design Methodology and Application in Integrated Testing System

Flip-Chip on Board Packaging of A Thermal Wind Sensor

Simulation and Experiment of Miniaturized Housing Structure for MEMS Thermal Wind Sensors

Design and Test of a Two-dimensional Integrated Flow Sensor by CMOS Technology

Design and simulation of integrated CMOS-compatible capacitive absolute pressure-sensing microsystems

Characteristics simulation of MEMS packaging using multichip modules technology