Abstract:A comprehensive understanding of shock formation and propagation in shock tubes is crucial for their diverse applications. The shock velocity in single-diaphragm shock tubes, characterized by initial acceleration and subsequent attenuation due to viscous effects, has been extensively investigated. However, limited studies exist on the double-diaphragm mode of operation. In this study, shock tube experiments were conducted using helium at pressures of 10–60 bar as driver gas and argon at pressures of 100–600 Torr as driven gas. The shock velocity profiles in the double-diaphragm mode show a sequence of acceleration and deceleration stages of the shock front, strongly influenced by the driver-to-driven pressure ratios (P41) and the pressure in the intermediate section (Pmid). Particularly, at high values of P41, peak shock velocities can exceed those measured near the end wall by about 12%. Large axial temperature gradients arise in the driven gas due to the accelerating and decelerating shock. Selecting appropriate diaphragms to maintain the intermediate section's pressure close to the value of the driver pressure can reduce peak shock velocities and post-shock temperatures. An in-house one-dimensional (1D) weighted essentially non-oscillatory scheme-based code was utilized to analyze wave interactions in the shock formation region, revealing that the post-shock gas behind the secondary diaphragm and inhibition of the primary diaphragm's opening and subsequent reopening can lead to unique shock profiles in double-diaphragm shock tubes. These insights deepen our understanding of wave propagation in shock tubes and suggest ways to mitigate undesirable effects in double-diaphragm shock tubes.

An Experimental Technique of Diaphragm Burstingby Rarefaction Wave in Double Driver Shock Tube

Insights into shock velocity variation in double-diaphragm shock tubes

Design of Diaphragmless Shock Tube and Research on Its Normal Temperature Characteristics

Influence of diaphragm properties on shock wave transmission

The Methods of Obtaining Lower Strength Shock Wave in Shock Tube

Experimental study on the pressure characteristics of an underwater-detonation gas jet

Diaphragm-Induced Attenuation in Shock Tubes

Numerical simulation of a shock wave experiment apparatus based on the air cannon

Performance Parameters Caculation of Shock Tube and Results Analysis

Predicting Non-Ideal Effects from the Diaphragm Opening Process in Shock Tubes

Experimental Studies of Shock Wave Formation in a Diaphragmless Shock Tube

Effect of Burst Disk Parameters on the Release of High-Pressure Hydrogen

Experimental Investigation on Shock Waves Generated by Pressurized Gas Release Through A Tube

Investigation of Burst Pressure of Flat-Scored Metal Diaphragms in Hypersonic Impulse Facilities

The design of the double shell gas puff for Qiangguang I generator

Three-dimensional numerical simulation on near-field pressure evolution of dual-tube underwater detonation

Shock wave and bubble pulsation characteristics in a field generated by single underwater detonation

Experimental research of bubble pulsation and jet under a double plate with circular hole

Experimental study of pressure dynamics, spontaneous ignition and flame propagation during hydrogen release from high-pressure storage tank through 15 mm diameter tube and exhaust chamber connected to atmosphere

Design of Double Shell Gas Puff for Z Pinch Experiment

Theoretical and experimental study on sealing performance of a novel ultra-high pressure bursting disc