Abstract:With the advantageous features include suitable lithium insertion position and "zero strain" structure, Li4Ti5O12 has become one of the ideal anode materials for lithium-ion battery and battery-capacitor system. However, the obstacle of its poor electronic and Li+ conductivity restrict its rate capacity. Many researches proved that the one-pot preparation process, which is mixing the carbon precursor with lithium and titanium precursor and then thermal treating in an inert or reducing atmosphere together, not only can form a carbon coating layer to improve the electronic property of the materials easily, but also inhibits the particle size growth of LTO by a barrier effect of carbon. Among kinds of carbon source, graphene presents excellent unique properties, which has been considered as an ideal carbon source to improve the electrochemical performance of LTO and many other active materials. However, the intersheet π-π attractions of GS easily resulted in its restacking and agglomeration. Therefore, an oxygenated graphene (GO) with a special amphiphilic molecular structure is adopted as GS precursor to prepare GS modified composites. Due to the amphiphilic characteristic of GO, the choice of an appropriate Li precursor is extremely important to obtain a high quality product. In this study, we systematically investigated the influence of lithium precursor and calcination atmosphere on the reaction mechanisms, phase formation, particulate morphology, surface properties and electrochemical performance of graphene sheets-modified nano-Li4Ti5O12 composite. The results shown that the lithium precursor containing carboxyl anion such as LiAc and Li2CO3 would connect with oxygen groups of GO by strong hydrogen bonds to restrict the morphology of composites and the phase formation of pure spinel Li4Ti5O12. Furthermore, the oxygen ratio in the molecular structure of lithium compound is proportional to the consumption of graphene. In addition, the reducing atmosphere facilitates the partial reduction of Ti4+ to promote the interfacial charge transfer kinetics of the product. Through optimization the conditions of the reaction, the sample adopting LiOH precursor with adjustment GS ratio calcined under Ar/H2 (5 %) atmosphere delivers 172.8 mAh g-1 at 1 C and maintained a discharge capacity of 98.0 mAh g-1 at a high rate of 40 C. This sample also showed fairly stable cycling performance. After 800 deep cycles at a high charge/discharge rate of 40 C, the capacity can hold 97.7 % of its second discharge value. This study not only provides an optimization of Li precursor and calcination condition for GS modified LTO material, but also has significant reference value for any combination reaction with GO participation.

STUDY ON LITHIUM INTERCALATION BEHAVIOR OF GRAPHITE AFTER SURFACE OXIDATION

Effects of the Oxidation Treatment with K2feo4 on the Physical Properties and Electrochemical Performance of A Natural Graphite As Electrode Material for Lithium Ion Batteries

Surface modification of graphite anode in lithium ion battery

Preparation of Anode Material for Lithium Ion Battery by Chemical Oxidation

Effects of catalytic oxidation on the electrochemical performance of common natural graphite as an anode material for lithium ion batteries

Exploring in Electrochemical Behaviors and Anions Storage Characteristics of Carbonaceous Materials in Molten Salts Ni/NiCl2-graphite Battery

Correlating Graphite Surface with Interphase for Fast‐Charging and Low‐Temperature Operation

Eliminating Graphite Exfoliation with an Artificial Solid Electrolyte Interphase for Stable Lithium‐Ion Batteries

Precise In-Situ and Ex-Situ Study on Thermal Behavior of LiNi1/3Co1/3Mn1/3O2/graphite Coin Cell: from Part to the Whole Cell

Surface Modification of Graphite by Ion Implantation for Promoting the Electrochemical Property in Li-ion Batteries

Modification of Natural Graphite for Lithium Ion Batteries

Modifications of graphite material for negative electrode of Li-ion batteries

Charge–discharge characteristics of raw acid-oxidized carbon nanotubes

Influence of Lithium Precursors and Calcination Atmospheres on Graphene Sheets-Modified Nano-Li4Ti5O12 Anode Material

Effects of Preparation Temperature of Graphite Oxide on the Structure of Graphite and Electrochemical Properties of Graphene-Based Lithium-Ion Batteries

New insight on graphite anode degradation induced by Li‐plating

Effect of Graphene on the Performance of Silicon–Carbon Composite Anode Materials for Lithium-Ion Batteries

Comparisons of graphite and spinel LiTiO as anode materials for rechargeable lithium-ion batteries

Incorporating Α-Al2o3 Nanodots into Expanded Graphite Anodes Toward Stable Fast Charging for Lithium-Ion Batteries

Scalable Synthesis of Carbon Stabilized Sio/Graphite Sheets Composite As Anode for High-Performance Li Ion Batteries

Enhanced electrochemical performance of LiNi0.8Co0.1Mn0.1O2 with a 3D-SiO2 framework by a new negative pressure immersion method