Abstract:In this study, we propose a tool-path generation approach for material extrusion-based additive manufacturing (AM) that considers the machining efficiency and fabrication precision, which are inherent drawbacks of general AM techniques compared with conventional manufacturing methods. The proposed approach aims to tackle the generation of direction-parallel tool-paths for the interior filling of simple connected areas, which comprises three main steps: (1) determining the inclination of reference lines; (2) generating and grouping tool-path segments into individual sub-paths; and (3) linking sub-paths based on specific requirements. These three modules interact to affect the efficiency and precision of AM significantly. In order to find an optimal inclination, we first analyze the impacts on the fabrication efficiency and manufacturing accuracy with different inclinations. A comparatively accurate building time model is developed subsequently to obtain the optimal tool-path inclination, but without compromising the machining precision, based on the analysis of a geometrical accuracy model. The proposed approach employs different inclinations in distinct layers according to specific manufacturing scenarios and technological requirements. After determining the reference lines, the tool-path segments are selected and grouped based on some characteristics (e.g., the number of intersections between reference lines and boundaries) to make up individual sub-paths, which are then connected to a zigzag-shaped path with short line segment connections. In the module for sub-path linking, some strategies are introduced to decrease the number of useless tool-paths, i.e., uncut paths, which could jeopardize the manufacturing quality by frequently turning the print head on and off. In addition, parametric curves are used to link the final sub-paths to avoid deceleration/acceleration processes in the end/starting parts of the sub-paths. The proposed approach has been used in practice to generate tool-paths for a wide range of models and the results verify its effectiveness and obvious advantages.

OPTIMIZATION OF MANUFACTURING PATH OF HOLES IN CAM SYSTEM

Machining Parameter Optimization of Milling Process Based on Uniform Design

Optimization Empty Run for CNC Multi-contour Processing

A digital solution for CPS-based machining path optimization for CNC systems

Generating Efficient Toolpath by Cutter Posture Optimization in Five-Axis Machining Based on Inverse Feedback Mechanism

Mixed Tiny Path Smoothing Method Based on Sliding Convolution Windows for CNC Machining

Approach optimizing tool paths arrangement based on genetic algorithm

Process Route Optimization for Machining Center Nc Milling Manufacturing

Minimizing the energy consumption of hole machining integrating the optimization of tool path and cutting parameters on CNC machines

Optimization of Tool-Path Generation for Material Extrusion-Based Additive Manufacturing Technology

Design of a CAM System for End Mills Based on Solid Modeling

Research on Inverse Evaluation Mechanism in Toolpath Generation Based on Global Interpolation Simulation

A new toolpath generation method with feed sensitive zones inspection based on inverse evaluation mechanism.

The Tool Paths Generation Approach Based on Level-Set Methods in Die-Cavities NC Machining

A feedback toolpath generation method for compound trimmed surface with machine’s dynamic characteristics confined

The frame thin-walled parts' optimization method about processing technology and tool path parameters

Pareto Fronts of Machining Parameters for Trade-off among Energy Consumption, Cutting Force and Processing Time

Continuous Toolpath Optimization for Simultaneous Four‐Axis Subtractive Manufacturing

Optimization and execution of multiple holes-drilling operations based on STEP-NC

A Computer Aided Tool Selection System For 3d Die/Mould-Cavity Nc Machining Using Both A Heuristic And Analytical Approach

A survey of path planning and feedrate interpolation in computer numerical control