Abstract:This paper deals with a case study for the piezoelectric materials suddenly exposed to an environmental medium of different temperature. The problem is idealized to a plate containing an edge crack or an embedded crack. The stress and electric displacement histories in an uncracked plate are calculated. These stresses and electric displacements are then added to the crack surface tractions and electric displacements with opposite sign to formulate a mixed boundary value problem. The cracking problem is thus reduced to a singular integral equation of Cauchy type, which is then solved numerically. Both impermeable crack assumption and permeable crack assumption are considered. The results for stress and electric displacement intensity factors are computed as a function of normalized time and crack size. Lower bound solutions are obtained for the maximum thermal shock that the material can sustain Without catastrophic failure according to the two distinct criteria: (i) The maximum local tensile stress equals the tensile strength of the medium. (ii) The maximum stress intensity factor for the pre-existing representative crack equals the fracture toughness of the medium. The parameters that control the transient thermal stress and electric displacement are also identified. The method can be used to explore susceptibility to thermal fracture in piezoelectric materials containing pre-cracks.

Thermal Shock Problem for a Semi-Infinite Thermo-Viscoelastic Piezoelectric Rod with Thermal Relaxation

State Space Approach to One-Dimensional Thermal Shock Problem for a Semi-Infinite Piezoelectric Rod

ONE-DIMENSIONAL GENERALIZED THERMAL SHOCK PROBLEM FOR A SEMI-INFINITE PIEZOELECTRIC ROD

A General Solution for Static Piezothermoelastic Problems of Crystal Class 6mm Solids

Study of a Two-Dimensional Thermal Shock Problem

Two-dimensional generalized thermal shock problem of a thick piezoelectric plate of infinite extent

Thermal Shock Problem Of Piezoelectric Materials With Temperature-Dependent Properties

A general solution for piezothermoelasticity of transversely isotropic piezoelectric materials and its applications

Generalized Piezoelectric Thermoelasticity Problems with Strain Rate and Transient Thermo‐electromechanical Responses Analysis

On the Dissipative Transient Waves in A Piezoelectric Microplate under Strong Thermal Shock

Electromagnetic thermo-viscoelastic response of piezoelectric rods considering memory dependent effects

STUDY ON A TWO-DIMENSIONAL GENERALIZED MAGNETO- THERMOVISCOELASTIC PROBLEM SUBJECTED TO RAMP-TYPE HEATING

Thermal Shock Strength of A Semi-Infinite Piezoelectric Medium

Dynamic Response of a Piezoelectric Quasicrystal Rod with the Generalized Thermoelasticity

Thermal shock fracture of piezoelectric materials

Response of a Semi-Infinite Microstretch Homogeneous Isotropic Body Under Thermal Shock

A Two-Dimensional Generalized Thermal Shock Problem for a Half-Space in Electromagneto-Thermoelasticity

Generalized solutions of transient thermal shock problem with bounded boundaries

Shock-induced Thermal Wave Propagation and Response Analysis of a Viscoelastic Thin Plate under Transient Heating Loads

Transient Thermo-Piezo-Elastic Responses of A Functionally Graded Piezoelectric Plate under Thermal Shock

Transient Magneto-Thermoelastic Response for A Semi-Infinite Body with Voids and Variable Material Properties During Thermal Shock