Abstract:Due to ageing of the bridge stock, continuously increasing load requirements, the need for assessing existing bridges is becoming increasingly important. Reinforced concrete (RC) bridge deck slabs are among the most critical parts to the load carrying capacity of bridges. Previous research indicated that the assessment method used in current practice largely underestimate the load-carrying capacity. The objective of the study reported in this licentiate thesis is to develop and calibrate improved methods for assessment of load-carrying capacity and response of existing bridge deck slabs. This study proposes an enhanced assessment through improved structural analysis and resistance evaluation in order to achieve higher detectable load-carrying capacity. To achieve this objective, the scientific approaches including literature study, laboratory tests, analytical analyses and finite element analyses were adopted. Two major studies and a series with supporting tests were conducted as following: A large test series, in which three specimens containing traditional steel bar reinforcement in ordinary concrete, were carried out to study the load carrying capacity and structural behavior of two-way slab. A proposed multi-level assessment method was validated through two case studies: a two-way slab and a cantilever slab. The multi-level assessment method includes simplified analysis, 3D linear FE analysis, 3D nonlinear analysis with shell elements, 3D nonlinear FE analysis with continuum elements include fully bonded reinforcement as well as 3D nonlinear FE analysis with continuum elements including bond-slip for the reinforcement. To develop the modeling strategies for two-way RC slabs with continuum elements, parameter studies has been carried out to investigate the influence of different modeling choices. Parameters including finite element properties, modeling of concrete, modeling of reinforcement and stiffness of supports were varied in different comparative models to investigate the influence. The study shows that existing methods currently used in assessment are not able to accurately reflect the response of RC bridge deck slabs, and underestimate their capacity. With enhanced assessment methods, such as the nonlinear finite element method, it is possible to better reflect the structural behavior, and more accurately determine the load carrying capacity. Two case studies have proven that the multi-level assessment method is able to reflect the structural behavior at different levels of approximation, which is beneficial in evaluating existing RC slabs. The parameter studies indicate that modeling choices such as geometric nonlinearity, crack bandwidth and Poisson’s ratio have significant impact on determination of the load-carrying capacity. Finite element properties, reinforcement model and stiffness of supports influence crack pattern and load distribution respectively.

Correlation Analysis of Synthetical Method & Overloading Method Used in Shapai RCC Arch Dam Abutment Stability Failure Testing

Structural Analysis of Existing RC Bridge Deck Slabs Structural Analysis of Existing RC Bridge Deck Slabs

Test & Study of Structural Properties of High RCC Arch Dam with Different Joint Formations

Study of damage behaviour of Shapai RCC arch dam

ANALYSIS OF ARCH DAM′S ABUTMENT STABILITY UNDER COMPLICATED GEOLOGICAL CONDITIONS AND STUDY OF INFLUENCE OF DENSE JOINTS

Study on Material Partial Coefficients at Ultimate State of Anti-Slide Carrying Capacity of Arch Dam

Study on Finite Element Analysis of Arch Dam by Deformation Assumptions Based on of Arch-beam Load-distributed Method

Stability analysis of abutment slopes based on long-term monitoring and numerical simulation

Abutment stability analysis of arch dam based on 3D nonlinear finite element method

Analysis of Support Abutments of Curved Bridges with Single-pedestal Piers

ANALYSIS OF ARCH DAM-ABUTMENT STABILITY BY 3D DEFORMABLE DISTINCT ELEMENTS

Study on the Failure Process and Nonlinear Safety of High Arch Dam and Foundation Based on Geomechanical Model Test

Stability Analysis of Left Abutment of the Arch Dam in Siduhe Hydropower Station

Study on Thrust Angles of High Arch Dam Abutment During Overloading

Research on Seismic Failure Pattern of Arch Dam with Contraction Joints by Shaking Table Tests and Numerical Analysis

Evaluation of Reinforcement and Analysis of Stability of a High-Arch Dam Based on Geomechanical Model Testing

Geomechanical model tests on global stability of an arch dam at Dagangshan

Stability Analysis for the Base Surfaces of Arch Dams by Direct Internal Force Method

STUDY ON THE EQUIVALENCE STRENGTH FOR CRACK DIRECTOR OF RCC ARCH DAM

DEFORMATION REINFORCEMENT THEORY AND GLOBAL STABILITY AND REINFORCEMENT OF HIGH ARCH DAMS

Geomechanical model test for stability analysis of high arch dam based on small blocks masonry technique