Abstract:Volatile organic compounds (VOCs) evaporate and vent from a vehicle's fuel tank to its evaporative control system when the vehicle is both driven and parked. VOCs making it past the control system are emissions. Driving and parking activity, fuel volatility, and temperature strongly affect vapor generation and the effectiveness of control technologies, and the wide variability in these factors and the sensitivity of emissions to these factors make it difficult to estimate evaporative emissions at the macro level. Established modeling methods, such as COPERT and MOVES, estimate evaporative emissions by assuming a constant in-use canister condition and consequently contain critical uncertainty when real conditions deviate from that standard condition. In this study, we have developed a new method to model canister capacity as a representative variable, and estimated emissions for all parking events based on semi-empirical functions derived from real-world activity data and laboratory measurements. As compared to chamber measurements collected during this study, the bias of the MOVES diurnal tank venting simulation ranges from -100% to 129%, while the bias for our method's simulation is 1.4% to 8.5%. Our modeling method is compared to the COPERT and MOVES models by estimating evaporative emissions from a Euro-3/4/5 and a Tier 2 vehicle in conditions representative for Chicago, IL, and Guangzhou, China. Estimates using the COPERT and MOVES methods differ from our method by -56% to 120% and -100% to 25%, respectively. The study highlights the importance for continued modeling improvement of the anthropogenic evaporative emission inventory and for tightened regulatory standards. Implications: The COPERT and MOVES methodologies contain large uncertainties for estimating evaporative emissions, while our modeling method is developed based on chamber measurements to estimate evaporative emissions and can properly address those uncertainties. Modeling results suggested an urgent need to complete evaporative emissions inventories and also indicated that tightening evaporative emission standards is urgently needed, especially for warm areas.

A Carbon Method Model Based on Gasoline Carbon Content

Relationship Between Gasoline Density and Carbon Content

A Model-Based Transit-Time Ultrasonic Gas Flowrate Measurement Method

Real-time On-Board Monitoring Method of Gasoline Vehicle Fuel Consumption Based on OBD System

Modelling of the fuel consumption for passenger cars regarding driving characteristics

Research on test method for fuel consumption of heavy-duty commercial vehicles

A Study on Vehicle Road Available Method

Measurementsof Unregulated Emissions from a Methanol-Gasoline Blend Vehicle Using Different Methods

[Study on On-Board Measurements and Modeling of Vehicular Emissions].

Develop of a Fuel Consumption Model for Hybrid Vehicles

Experimental research and estimation model of gasoline evaporative emissions from vehicles in China

Investigation of Heavy-Duty Vehicle Chassis Dynamometer Fuel Consumption and CO2 Emissions Based on a Binning-Reconstruction Model Using Real-Road Data

Study on Exhaust Emission Test of Diesel Vehicles Based on PEMS

On-road Remote Sensing Measurements and Fuel-Based Motor Vehicle Emission Inventory in Hangzhou, China

Developing a High-Resolution Vehicular Emission Inventory by Integrating an Emission Model and a Traffic Model: Part 1—Modeling Fuel Consumption and Emissions Based on Speed and Vehicle-Specific Power

Uncovering the CO2 Emissions of Vehicles: A Well-to-wheel Approach

A Study on In-use Vehicle Emission Testing Methods

Multi-method Joint Measurement of Unregulated Pollutant Emissions from an Ethanol-gasoline Vehicle

A real-time hydrogen consumption estimation method for fuel cell vehicles

A Fuel-Consumption Based Window Method for Pems Nox Emission Calculation of Heavy-Duty Diesel Vehicles: Method Description and Case Demonstration

Modeling Cold Soak Evaporative Vapor Emissions from Gasoline-Powered Automobiles Using a Newly Developed Method.