Abstract:Experiments are carried out on the Phi 2 m Shock Tunnel (FD-14A) at the China Aerodynamics Research and Development Center to study the effect of the transverse groove with/without discharge hole on the hypersonic blunt flat-plate boundary layer transition, and the preliminary computational and theoretical research are carried out. The inflow Mach number of the test is 6, the unit Reynolds number is 3.3 x 10(7)/m, the leading edge radius of the flat-plate is 1 mm, and the angle of attack is -4 degrees. Three different sets of two-dimensional transverse grooves are arranged at 110 mm away from the leading edge of the flat-plate. The width and depth of the grooves are, respectively, 2.5 mm and 1 mm for groove 1, 3.75 mm and 1.5 mm for groove 2, and 5 mm and 2 mm for groove 3, at the same time, both ends of the groove 1 can open the discharge hole (the discharge hole has a size of 2.5 mm x 5.0 mm and a width the same as that of groove 1). The discharge hole is denoted as the groove 4, and the smooth flat-plate when the groove is not included is denoted as groove 5 or the flat. The Phi 2-mm-diameter cylindrical heat flux sensor is used to measure the heat flux distributions of the center line of the flat-plate under different conditions, and thus we can judge the transition of the boundary layer. The measurement results show that the smooth plate starts to transit at x approximate to 340 mm, and the transition is nearly completed at x approximate to 425 mm. The groove causes the transition position of the boundary layer of the plate to advance, and as the width and depth of the groove increase, the promoting effect on the transition is enhanced, and the transition position moves upstream. After the groove 1 is added to the discharge hole (groove 4), the heat flux distribution and the transition position are substantially the same as those of the smooth plate. After the boundary layer flow completely transits into turbulent flow, the difference in heat flux for each case is small, which indicates that the grooves of different specifications affect only the heat flux distribution in the transition process, but have little effect on the heat flux of the turbulent wall after the transition. The computational fluid dynamic results show that the discharge holes cause passive suction, and the test results show that the suction effect of the discharge holes at both ends of the groove counteracts the effect of the groove on the transition of the center line boundary layer, but it may be just a coincidence, and further research is needed. The linear stability theory (LST) and the optimal perturbation method are used to analyze the flow instability mechanism of the smooth blunt plate. The LST results show that there is no first mode instability nor second mode instability in the blunt plate flow. The modal instability mechanism cannot explain the observed transition in the test. The optimal disturbance calculation shows that the blunt plate flow suffers strong non-modal instability, which can qualitatively explain the observed transition phenomenon.

A Method for Producing Oblique Shock-Bow Shock Interaction in Double-Driver Shock Tunnel

Experimental Investigation on Forced Boundary-Layer Transition in Shock Tunnel

UNSTEADY CHARACTERISTICS OF THE SHOCK PROPAGATION IN A CONVERGENT SHOCK TUBE WITH SMALL ANGLE

Analysis of shock train leading shock structure under oscillatory backpressure

Asymmetry of oblique shock train and flow control

Numerical Simulations of Shock/obstacle Interactions Using an Improved Ghost-Cell Immersed Boundary Method

Analysis of the Overpressure Fields in a Shock Tube with Multi-Point Initiation

Schlieren measurements of shock train flow fields in a supersonic cylindrical isolator at Mach 2

Bow Shocks Formed by a High-Speed Laser-Driven Plasma Cloud Interacting with a Cylinder Obstacle

Asymmetric Characteristics Of The Shock Bifurcation In The Reflected Shock/Boundary Layer Interaction

Prediction dynamic model of shock train with complex background waves

Unsteady Shock Interactions on V-shaped Blunt Leading Edges

Experimental study on effect of transverse groove with/without discharge hole on hypersonic blunt flat-plate boundary layer transition

Experimental and numerical investigation of three-dimensional shock train topology with differently oriented background waves

Exploration of Shock–droplet Interaction Based on High-Fidelity Simulation and Improved Theoretical Model

Three-dimensional reconstruction of incident shock/boundary layer interaction using background-oriented schlieren

Studies on shock interactions with moving cylinders using immersed boundary method

Shock Bifurcation Phenomenon in the Reflected Shock/Boundary Layer Interaction

Numerical modeling of a high-enthalpy shock tunnel driven by gaseous detonation

Experimental study on shock interaction control of double wedge in high-enthalpy hypersonic flow subject to plasma synthetic jet

Numerical investigations on interactions between 2D/3D conical shock wave and axisymmetric boundary layer at Ma=2.2