A Study of Depletion Layer Effects on Equivalent Circuit Parameters Using an Electrochemical Quartz Crystal Impedance System
Qingji Xie,Jin Wang,Anhong Zhou,Youyu Zhang,Hongwei Liu,Zhinian Xu,Yu Yuan,Maoying Deng,Shouzhuo Yao
DOI: https://doi.org/10.1021/ac981390z
IF: 7.4
1999-01-01
Analytical Chemistry
Abstract:An electrochemical quartz crystal impedance system (EQCIS) was used to investigate depletion layer effects on equivalent circuit parameters of piezoelectric quartz crystal resonance in electrochemical processes of CoSO4 aqueous solutions containing 0.4 moVL ethylenediamine + 0.5 mol/L Na2SO4, 0.2 mol/L l,l0-phenanthroline + 0.5 moVL Na2SO4 and K3Fe(CN)(6), or K4Fe(CN)(6) aqueous solutions containing 1.0 mol/L KCI in potential cycling experiments, respectively, The impedance data were analyzed according to Martin's model. For the former two systems, motional resistance R-1, series resonant frequency f(s),, and motional inductance L-1 changed reversibly with potential, and the observed values of Delta R-1, Delta L-1, and Delta f(s), roughly satisfied equations reflecting liquid loading effects, suggesting that changes in these parameters might be mainly governed by local variations in solution density and viscosity near the electrode surface. For the latter two systems, reversible changes in R-1 with potential coincided well with the simulated results from variations in solution density and viscosity near the electrode surface; however, besides reversible changes of Delta L-1 and Delta f(s),with potential, rising drifts of f(s), and decreasing drifts of L1 were found at oxidation potentials. The drifts off, and L1 observed are believed to result from mass changes of the gold electrode, and cyanide and chloride corrosion of the gold electrode at oxidation potentials may play an important role for the drifting phenomena. It is concluded that quantitative analyses of Delta R-1, Delta L-1, and Delta f(s), obtained from the EQCIS provide the possibility for differentiating the net depletion layer effect with the change in electrode mass, and the Delta R-1 response may be well used for evaluating local changes in liquid loading inside the depletion layer compared with responses of Delta f(s), and Delta L-1.