Middle Frequency Signal Sampling Processing Method of Automobile Millimeter Wave FMCW Radar

党宏社,韩崇昭,赵广社

DOI: https://doi.org/10.3969/j.issn.1004-7859.2002.04.013

2002-01-01

Abstract:The principle of millimeter wave FMCW radar are were introduced,which is used to track vehicles for autonomous intelligent cruise control, the method of processing radar signal is described in this paper.

What problem does this paper attempt to address?

Method of reducing data transmission throughput of FMCW (linear frequency modulated continuous wave) radar system

Hu Tang,Xu Zhiwei,Yu Xiao,Deng Qingwen,Yang Lijie,Xu Tongkai,Guo Qingshui

2020-01-01

Abstract:The invention discloses a method of reducing the data transmission throughput of an FMCW (linear frequency modulated continuous wave) radar system. According to targets in the detection range of the radar system, the change distance of each target is limited within the preset small time window interval, the feature of spatial locality exists, each target corresponds to a distance dimension FFT, namely, 1st FFT, and the corresponding target frequency value on a frequency spectrum has invariance. According to the distribution condition of the concerned object targets in the 1st FFT, digital down-conversion processing of each frequency spectrum sub-band is carried out, namely, digital domain NCO shifting is carried out on the ADC (analog-to-digital converter) output, anti-aliasing filtering processing is carried out, then the corresponding multiple extraction output is carried out, and therefore the effect of reducing the data transmission throughput of the whole radar system is achieved.
Low Power Millimeter Wave Radar System for the Visually Impaired

Ningbo Long,Kaiwei Wang,Ruiqi Cheng,Weijian Hu,Kailun Yang

DOI: https://doi.org/10.1049/joe.2019.0037

2019-01-01

Journal of Engineering

Abstract:In order to help visually impaired people to avoid obstacles, a K-band millimetre wave (MMW) radar system based on the principle of frequency-modulated continuous wave (FMCW) is proposed in this study. The FMCW basic principle and the signal processing algorithm are elaborated in detail. The prototype of the radar system has been designed and manufactured. The experiment results show the qualified detection accuracy in view of low deviation. The maximum deviations from the range measurement experiments for a person and a car are 0.14 and 0.47 m, respectively. As a wearable system, the radar system has the characteristics of low power and small size, which is very suitable for blind navigation application. In addition, the MMW radar has broad application prospects in the field of automotive blind spot detection and small robots.
Mass Production Development of 4D Millimeter-Wave Radar Based on a Single Chip

Yongjun Cai,Xiansheng Zhang,Jie Bai,Hui-Liang Shen,Bing Rao

DOI: https://doi.org/10.4271/2024-01-7026

2024-01-01

Abstract:In this paper, a single-chip based design for an automotive 4D millimeter -wave radar is proposed. Compared to conventional 3D millimeter-wave radar, this innovative scheme features a MIMO antenna array and advanced waveform design, significantly enhancing the radar's elevation measurement capabilities. The maximum measurement error is approximately ±0.3° for azimuth within ±50° and about ±0.4° for elevation within ±15°. Extensive road testing had demonstrated that the designed radar can routinely measure targets such as vehicles, pedestrians, and bicycles, while also accurately detecting additional objects like overpasses and guide signs. The cost of this radar is comparable to that of traditional automotive 3D millimeter-wave radar, and it has been successfully integrated into a forward radar system for a specific vehicle model.
An Improved Scheme for High-Resolution Point Cloud Map Generation Based on FMCW Radar

Qiangwen Zheng,Yaping Xie,Lijie Yang,Junjie Li,Chunyi Song,Zhiwei Xu,Kai Ding

DOI: https://doi.org/10.1109/sam48682.2020.9104348

2020-01-01

Abstract:For the frequency modulated continuous wave (FMCW) radar, the angle resolution of the generated point cloud map (PCM) is limited by both the number of receiver antennas and the interference of multi-target environments. This paper proposes an improved scheme for high-resolution PCM generation based on a 77 GHz FMCW radar system. The scheme consists of a method to synthesize an equivalent virtual array based on the time-division multiplexing (TDM) multiple-input multiple-output (MIMO) technique and an improved target detection algorithm based on multi-channel fusion. The results show that the proposed scheme could suppress the noise floor and improve the accuracy of target detection by 1.33 times compared to a conventional constant false alarm rate (CFAR) detector in a multi-target environment. Moreover, by applying the proposed scheme, the angle resolution of the PCM generated by the radar system reaches to 1.3022 degrees.
A 144GHz 0.76cm-resolution sub-carrier SAR phase radar for 3D imaging in 65nm CMOS.

Adrian Tang,Gabriel Virbila,David Murphy,Frank Hsiao,Yen-Hsiang Wang,Qun Jane Gu,Zhiwei Xu,Y. Wu,M. Zhu,Mau-Chung Frank Chang

DOI: https://doi.org/10.1109/ISSCC.2012.6177009

2012-01-01

Abstract:Millimeter-Wave-based radar has gained attention in recent years for automotive and object detection applications. Several new applications are also emerging which employ mm-Wave radar techniques to construct short range mm-Wave 3D imaging systems for security screening and biomedical applications. At present, these types of 3D mm-Wave imagers have only been demonstrated in lll-V technology, as CMOS-based radar suffers several range and resolution limitations due to limited output power and linearity.Most CMOS mm-Wave radar systems used in automotive applications are based on Frequency-Modulated Continuous-Wave (FMCW) ranging techniques in which the carrier is swept to produce a frequency offset at the receiver output proportional to the round-trip distance between the radar and target. While FMCW is an excellent approach for accurate ranging, its implementation becomes particularly difficult at high frequencies as the resolution is heavily dependent on sweep linearity and the high RF front-end performance required to support the wideband swept carrier. For 3D mm-Wave imaging applications, this high operating frequency is indispensable as the attainable spatial (XY) resolution is fundamentally limited by the wavelength of the imaging system. Higher frequency also helps relax focusing lens requirements, as the optical diffraction limit is set by the ratio of the radar wavelength over the lens aperture size.
Experiments with mmWave Automotive Radar Test-bed

Xiangyu Gao,Guanbin Xing,Sumit Roy,Hui Liu

DOI: https://doi.org/10.1109/IEEECONF44664.2019.9048939

2022-10-07

Abstract:Millimeter-wave (mmW) radars are being increasingly integrated in commercial vehicles to support new Adaptive Driver Assisted Systems (ADAS) for its ability to provide high accuracy location, velocity, and angle estimates of objects, largely independent of environmental conditions. Such radar sensors not only perform basic functions such as detection and ranging/angular localization, but also provide critical inputs for environmental perception via object recognition and classification. To explore radar-based ADAS applications, we have assembled a lab-scale frequency modulated continuous wave (FMCW) radar test-bed (<a class="link-external link-https" href="https://depts.washington.edu/funlab/research" rel="external noopener nofollow">this https URL</a>) based on Texas Instrument's (TI) automotive chipset family. In this work, we describe the test-bed components and provide a summary of FMCW radar operational principles. To date, we have created a large raw radar dataset for various objects under controlled scenarios. Thereafter, we apply some radar imaging algorithms to the collected dataset, and present some preliminary results that validate its capabilities in terms of object recognition. Our code is available at <a class="link-external link-https" href="https://github.com/Xiangyu-Gao/mmWave-radar-signal-processing-and-microDoppler-classification" rel="external noopener nofollow">this https URL</a>.

Signal Processing,Machine Learning
Research on Key Tchnologies for Collision Avoidance Automotive Radar

Li Mu,Tong Xiangqian,Shen Ming,Yin Jun

DOI: https://doi.org/10.1109/ivs.2009.5164283

2009-01-01

Abstract:Anti-interference capability and low cost play decisive roles for the break-through on the market of collision avoidance automotive radar.With the increasing use of automotive radar, the mutual interference becomes an issue. This paper proposes a novel signal design and signal processing methods for automotive radar, which combine good anti-interference capacity and the low cost of conventional frequency modulated continuous wave (FMCW) radar. The radar signal is easy to be generated and its signal processing can be performed by Fast Fourier Transform (FFT) algorithm. So, the proposed new methods is feasible and effective.
Millimeter-Wave FMCW Signal Generators for Radar Applications

Jianxi Wu,Jianfu Lin,Haikun Jia,Baoyong Chi

DOI: https://doi.org/10.1109/icsict.2018.8565659

2018-01-01

Abstract:Millimeter-wave radars could achieve high detection resolution and have drawn a lot of attention in recent years. Frequency-modulated continuous-wave (FMCW) radar is the most popular one in civil applications due to its low peak power and high integration, where the FMCW signal generator is one crucial block and has significant influence on the radar system performance. In this paper, three kinds of FMCW signal generator are presented, including a charge-pump based analog phase-locked loop (PLL), a Bang-Bang phase detector (BBPD) based mixed-mode PLL and a time-to-digital-converter (TDC) based mixed-mode PLL. The advantages and disadvantages of various signal generators are discussed, based on our recent research work. Techniques to support reconfigurable slopes or sawtooth-type chirp waveform and achieve better performance are also reviewed.
The Embedded Implementation of Millimeter Wave Radar Signal Processing System

Xingbo Ren,Zhiyuan Liu,Tengfei Fu

DOI: https://doi.org/10.1007/978-981-10-6445-6_79

2017-01-01

Abstract:The paper designed a radar signal processing system in order to help the intelligent vehicle to recognize the surrounding environment. Firstly, a hardware platform was designed to filter and amplify the output signal from radar using TMS320F28335 as the main controller. The hardware platform can also supply modulation signal to the radar. Then the radar signal processing algorithm was designed to recognize the targets in front of the radar. In the algorithm, FFT and Chirp-z were used to determine the peaks’ frequency of the targets. And the CFAR algorithm was used to remove the interference of environmental factors. What’s more, the peaks match algorithm and false targets exclude algorithm were used to avoid false alarm and missing alarm. Finally, the algorithm was programmed in C language and downloaded to the hardware circuit to do some test. The test results show that the millimeter-wave radar signal processing system designed in this paper successfully realizes the calculation of the distance, velocity and direction of the targets.
VANET-Assisted Interference Mitigation for Millimeter-Wave Automotive Radar Sensors.

Mengyuan Zhang,Shibo He,Chaoqun Yang,Jiming Chen,Junshan Zhang

DOI: https://doi.org/10.1109/mnet.001.1900271

IF: 10.294

2020-01-01

IEEE Network

Abstract:As key sensors of the ADAS, mmWave radars have been widely used for fulfilling tasks including adaptive cruise control, lane-changing assistance and collision avoidance. However, the interference generated by mmWave radars mounted on close-by vehicles, if not managed well, could seriously degrade the radars' performance, giving rise to a safety hazard. In this work, we study interference mitigation for the off-the-shelf 77 GHz FMCW mmWave radars. We review several state-of-the-art ideas for suppressing co-channel interference, based on which we introduce a VANET-assisted radar interference mitigation scheme, which is shown to be effective in an environment with dense traffic. Specifically, a TDMA based MAC protocol is devised that enables the coordination among vehicles on efficient multiple access of radar spectrum. Numerical results corroborate the performance gain of the proposed approach compared to the existing random frequency hopping approaches.
Using FWCW Radar Sensor to Distinguish Audio Arabic Numerals

Changhao Yang,Shengchang Lan,Jiale Wang

DOI: https://doi.org/10.1109/ISAP57493.2023.10388999

2023-01-01

Abstract:Millimeter-wave radar, as a non-contact high-precision detection technology, can realize very fine object detection and tracking in complex environments within a specific frequency range. It is of great significance to apply it to sound detection. In this paper, the application of millimeter-wave radar in sound detection will be discussed in depth from the following aspects: First, this paper reviews various current sound detection technologies and solutions, and then summarizes the characteristics, advantages, and limitations of millimeter-wave radar sound detection. Secondly, the challenges and problems faced by the application of millimeter-wave radar technology in sound detection are explored, and specific solutions are proposed. Finally, the experimental results are evaluated and summarized The experimental results are summarized, and the research results and suggestions for future development are given.
Incoherent Interference Detection and Mitigation for Millimeter-Wave FMCW Radars

Zhihuo Xu,Shuaikang Xue,Yuexia Wang

DOI: https://doi.org/10.3390/rs14194817

IF: 5

2022-09-28

Remote Sensing

Abstract:Current automotive radar technology is almost exclusively implemented using frequency modulated continuous wave (FMCW) radar in the millimeter wave bands. Unfortunately, incoherent interference is becoming a serious problem due to the increasing number of automotive radars in dense traffic situations. To address this issue, this article presents a sparsity-based technique for mitigating the incoherent interference between FMCW radars. First, a low-pass filter-based technique is developed to detect the envelope of the interference. Next, the labeled regions where interference is present are considered as missing data. In this way, the problem of mitigating interference is further formulated as the restoration of the echo using L1 norm-regularized least squares. Finally, the alternating direction method of the multipliers-based technique is applied to restore the radar echoes. Extensive experimental results demonstrate the effective performance of the proposed approach. Compared to state-of-the-art interference mitigation methods, the proposed method remarkably improves the quality of radar targets.

environmental sciences,imaging science & photographic technology,remote sensing,geosciences, multidisciplinary
RESEARCH ON APPLICATION OF TRAFFIC INFORMATION COLLECTION BASED ON MILLIMETER WAVE RADAR

DOI: https://doi.org/10.29121/ijesrt.v9.i10.2020.11

2020-01-01

OCTOBER 2020

Abstract:This paper proposes a new type of traffic information collection equipment—millimeter wave radar based on ground sensing coils, video detection, microwave detection and other traffic collection equipment; the purpose of the research is to collect road traffic information parameters at intersections through millimeter wave radar. , Such as traffic volume, traffic flow density, time average speed, interval average speed, headway time, vehicle queue length, etc.; introduced the working principle of the frequency modulated continuous wave (FMCW) millimeter wave radar traffic monitoring system modulated by triangle wave, using the Doppler effect to get The speed of the vehicle; the speed-distance formula and the combination of numbers and shapes are used to obtain the queue length of the vehicle; the triangular wave radar can detect the position information of multiple vehicles at the same time, and can obtain real-time traffic volume and traffic flow density; use the speed of a single vehicle and The position information of multiple vehicles can obtain time average speed, interval average speed, headway time and other parameters; compared with existing research, the results obtained in this paper have certain practical significance.
Automotive Millimeter Wave Radar Imaging Techniques

Yang Yang,Yuming Liu,Lvhongkang Lan,Kaihang Zheng,Kun Deng,Yan Huang,Jiang Liu

DOI: https://doi.org/10.1109/ICMMT58241.2023.10276672

2023-05-14

Abstract:With the rapid development of science and technology, autonomous driving is gradually moving from theoretical research to engineering reality. Millimeter-wave (MMW) radars, Lidars, cameras, and other sensors form the core of environmental perception for autonomous vehicles and Advanced Driver Assistance Systems (ADAS). While cameras offer low cost and rich information, they are not easy to use in conditions of poor illumination and climate. Lidar has strong long-range detection and measurement accuracy but is expensive and not suitable for large-scale application. In contrast, MMW radar has long-distance detection, small volume, moderate cost, all-weather capability, and strong ability to penetrate rain, fog, haze, and smoke, making it an important part of many automotive sensors.

Engineering,Physics
Research on Thickness Measurement Technology Based on FMCW Radar

Qiuyu Zeng,Hengliang Li,Dun Lu,Tongxing Huang,Wenjie Fu,Yang Yan

DOI: https://doi.org/10.1109/ivec56627.2023.10157279

2023-01-01

Abstract:With the rapid development of microwave and millimeter wave solid-state devices and digital signal processors, Frequency-Modulated Continuous-Wave (FMCW) radar has been widely used in various fields. This paper studies the thickness measurement technology of FMCW, and a FMCW radar front-end working in C-band was designed and implemented. To improve the precision for thickness measurement, a Chirp-Z transform (CZT) algorithm is applied in this paper. Finally, a FMCW radar with a center frequency of 5.8 GHz and a bandwidth of 1 GHz were established, and thickness measurement experiments were carried out. The experimental results demonstrate that the FMCW radar can obtain the sample thickness with low error.
Design of automotive anti-collision radar sampling system based on DSP

Zhang Heng,Liu Shengli,Fan Jiangtao,Wang Liang

DOI: https://doi.org/10.3969/j.issn.0258-7998.2012.04.011

2012-01-01

Abstract:Directed toward the linear frequency modulation continuous wave radar,an ADC which has two simultaneous differential inputs is chosen,and a system based on SPORT port of DSP is designed to sample the I and Q quadrature signals.The system validity is validated via experiments.
Millimeter-wave radar image analysis for the traffic sensing

H M Wu,F Qi,J K Wang,Y Wang

DOI: https://doi.org/10.1088/1742-6596/1507/5/052014

2020-04-01

Journal of Physics: Conference Series

Abstract:Abstract Millimeter-wave(MMW) radar sensing is one of the most promising technologies to provide safe navigation for autonomous vehicles due to its expected high-resolution imaging capability However, driverless cars have higher request for different environment and light conditions. Therefore, millimetre-wave imaging is of paramount importance for complex load scenario. In this paper, we have built models of pavement pits and bulges and analysed their with differences ways of antennas. A comparison of the imaging performance of experimental systems operating at a MMW radar and a Lidar is presented with the analysis of features for initial image interpretation Experimental images of the complex road surface are made by a 94GHz frequency-modulated continuous-wave (FMCW) radar technique with 3mm wavelength.
Automotive FMCW Radar with Difference Co-Chirps

Lifan Xu,Shunqiao Sun,Kumar Vijay Mishra,Yimin D. Zhang

DOI: https://doi.org/10.1109/taes.2023.3299259

IF: 3.491

2023-01-01

IEEE Transactions on Aerospace and Electronic Systems

Abstract:In an automotive radar scenario, the transmission of sparsely spaced chirps along slow time creates opportunities to significantly reduce or completely avoid mutual interference. However, nonuniform chirps result in high Doppler sidelobes, which may introduce ambiguity in Doppler estimation. In this article, we present an automotive frequency-modulated continuous-wave radar that exploits difference co-chirps to achieve high-accuracy range–Doppler estimation with low complexity. By exploiting sparsity in slow time, the proposed method achieves the same Doppler velocity resolution as the regular uniform pulsing but with much fewer chirps. The silent transmission intervals become available to other automotive radars, thereby eliminating the mutual interference. The fast-time samples are treated as snapshots to construct the second-order statistical information for Doppler spectrum estimation. For our proposed nonuniform pulsing, we develop an efficient range–Doppler spectrum estimation method and propose a matching technique that is based on 2-D compressed sensing followed by Doppler dealiasing. This algorithm achieves ipso facto range–Doppler pairing without grid mismatch errors in parameter estimation and does not require an exhaustive search. Extensive numerical experiments show that accurate range–Doppler estimation is achieved with significantly fewer chirps compared to the conventional consecutive transmission. Field campaigns using Texas Instruments imaging radar support our theoretical investigations.
Enhanced Motion Sensing With FMCW Radar Based on a Novel Frequency-Reconfigurable Technique

Changzhan Gu,Zhiwei Zhang,Jiayu Zhang,Yuchen Li,Jingtao Liu

DOI: https://doi.org/10.1109/TMTT.2024.3383667

IF: 4.3

2024-10-01

IEEE Transactions on Microwave Theory and Techniques

Abstract:The motion sensing capability of millimeter-wave radar is significantly contingent upon its operating frequency. However, conventional techniques do not allow frequency modification once the radar hardware is completed. In this article, a novel frequency-reconfigurable technique is proposed to enable the operating frequency reconfiguration without any hardware modifications, enhancing the radar’s capability to perceive displacement motions across various scales. This technique splits frequency-modulated continuous-wave (FMCW) beat signals into multiple sub-FMCW signals, yielding pairs of quadrature signals that are similar to those in continuous-wave radars. These quadrature signals are subsequently synthesized to quadrature signals at a new operating frequency. For weak motions of deep subwavelength scale, the proposed technique improves the detection sensitivity by reconstructing equivalent quadrature signals at a higher operating frequency, such as from 60 up to 480 GHz. For large-scale motions, this technique surpasses the radar’s velocity limit by reconstructing that at a lower frequency, e.g., 60–1 GHz. Simulation results and theoretical analysis demonstrate the superiority of this technique for motion sensing. Experiments were also carried out to validate this technique in detecting the weak deep subwavelength, large-scale mechanical vibrations, and action gestures. Experimental results indicate that this technique exhibits approximately a three times accuracy improvement in detecting weak motions and about ten times accuracy improvement in detecting large-scale motions compared to the conventional technique.

Engineering,Physics
A DFRC System Based on Multi-Carrier Agile FMCW MIMO Radar for Vehicular Applications

Dingyou Ma,Tianyao Huang,Nir Shlezinger,Yimin Liu,Xiqin Wang,Yonina C. Eldar

DOI: https://doi.org/10.1109/ICCWorkshops49005.2020.9145355

2020-01-01

Abstract:Automotive radar and communications are necessary components for future vehicles, allowing them to sense the environment and communicate with their surroundings. The joint design of both systems leads to potential gains in system size, power consumption, and spectrum efficiency. In this paper, we propose a dual function radar-communications system based on a multi-carrier frequency modulated continuous waveform MIMO radar. The proposed scheme transmits narrowband frequency modulated continuous waveform (FMCW) from a subset of transmit antennas in a randomized manner rather than utilizing all the elements simultaneously. The randomness is exploited to convey information in the form of index modulation by embedding the transmitted bits in the selection of carrier frequencies and antennas. The results show that the proposed radar scheme achieves a similar resolution performance compared with a wideband radar system operating with a large receive aperture. While for communications subsystem, the proposed scheme achieves better bit error rate performance than the system only exploiting phase modulation.

Middle Frequency Signal Sampling Processing Method of Automobile Millimeter Wave FMCW Radar

Method of reducing data transmission throughput of FMCW (linear frequency modulated continuous wave) radar system

Low Power Millimeter Wave Radar System for the Visually Impaired

Mass Production Development of 4D Millimeter-Wave Radar Based on a Single Chip

An Improved Scheme for High-Resolution Point Cloud Map Generation Based on FMCW Radar

A 144GHz 0.76cm-resolution sub-carrier SAR phase radar for 3D imaging in 65nm CMOS.

Experiments with mmWave Automotive Radar Test-bed

Research on Key Tchnologies for Collision Avoidance Automotive Radar

Millimeter-Wave FMCW Signal Generators for Radar Applications

The Embedded Implementation of Millimeter Wave Radar Signal Processing System

VANET-Assisted Interference Mitigation for Millimeter-Wave Automotive Radar Sensors.

Using FWCW Radar Sensor to Distinguish Audio Arabic Numerals

Incoherent Interference Detection and Mitigation for Millimeter-Wave FMCW Radars

RESEARCH ON APPLICATION OF TRAFFIC INFORMATION COLLECTION BASED ON MILLIMETER WAVE RADAR

Automotive Millimeter Wave Radar Imaging Techniques

Research on Thickness Measurement Technology Based on FMCW Radar

Design of automotive anti-collision radar sampling system based on DSP

Millimeter-wave radar image analysis for the traffic sensing

Automotive FMCW Radar with Difference Co-Chirps

Enhanced Motion Sensing With FMCW Radar Based on a Novel Frequency-Reconfigurable Technique

A DFRC System Based on Multi-Carrier Agile FMCW MIMO Radar for Vehicular Applications