Measurement Methods for Basic Research of Plant Electrical Signal

杨佳,杨方,周修理

DOI: https://doi.org/10.3969/j.issn.1003-188x.2003.03.055

2003-01-01

Abstract:The thesis give an early attempt to the actual problem encounted in measuring plant electrical signal, establish plant electrical signal monitor system and point out the problem which need to be solved furthermore.

What problem does this paper attempt to address?

Study of plant water lack message based on electric property and water potential of leaf

BAO Yi-dan,SHEN Jie-hui

DOI: https://doi.org/10.3321/j.issn:1008-9209.2005.03.023

2005-01-01

Abstract:The relationship between the plant water lack degree and the electric property and water potential of leaf was studied with an aim of improving the measurement accuracy and speeding-up of information transfer. Leaf water potential of a plant fluctuated in the course of a day, which was dependent on change in weather conditions and was also controlled by certain intrinsic rules of physiology of the plant. Both measurement and comparison were complex. Fluctuation of leaf capacitance within a day was relatively inappreciable. The method described in this paper is quite easy and gives conspicuous result. It is just a new desirable method in obtaining the plant water lack degree quickly and exactly.
Design of Measurement System for Electrical Signal in Plant Based on Virtual Instrument

王玲玲,翁绍捷,陈薇

DOI: https://doi.org/10.3969/j.issn.1009-9492.2009.01.033

2009-01-01

Abstract:Basing of LabVIEW for platform of software development,we designed an experiment system of virtual instrument,which is used to obtain electrical signals in plants by data acquisition of U12 and pre-amplifier.With the help of the system,we can obtain large numbers of the plant electrical signal.We set up the plant--the electric wave signal obtaining--signal modulating--the computer information data processing--wave displaying--the plant electric wave signal characteristic analyzing.
Computing Methods in Analyzing Plant Electrical Signal

王忠义,黄岚

DOI: https://doi.org/10.3321/j.issn:1002-6819.2002.05.008

2002-01-01

Abstract:New computing devices and signal processing method have been developed in recent years for further revealing innate characteristics of complex and chaotic system in adaptation to variable external environment. Three such methods were employed in analyzing plant electrical signal system, including statistical analysis and grey system method in time domain, Fourier analysis in frequency domain, wavelet transform analysis in time-frequency domain. The results show that the relations between many environmental factors and electrical signals in plant are easier to be revealed by using these methods than the traditional methods of acquiring, recording, analyzing the plant electrical signal, and therefore the result of analysis can be employed directly in production process principally.
Detection Of Electrical Signal Of Plant With Four-Electrode Method

Yong Zhao,Minzan Li,Junning Zhang

2007-01-01

Abstract:Electrical signal in plants could better show a state of the process of plant growth. A testing system based on four-electrode method, which could acquire plant electrical signal, was described in this paper. The system was mainly made up of a sensor, control circuits and display circuits. The sensor electrode consists of 4 metal probes, the two outside ones injected constant alternating current into plant and the inside two detected the voltage drop in it. Control circuits used a single chip as main control unit (MCU). The MCU performed next functions: converting alternating current signal from the sensor to virtual value for measurement, digitizing the analog signals, processing the digital signal. Display circuits showed the signal by liquid crystal display (LCD). The result of primary experimentation indicated that there was some correlativity between electrical signals of plant and growing of plant.
Research Progress on Electrical Signals in Higher Plants

Xiaofei Yan,Zhongyi Wang,Lan Huang,Cheng Wang,Ruifeng Hou,Zhilong Xu,Xiaojun Qiao

DOI: https://doi.org/10.1016/j.pnsc.2008.08.009

IF: 4.269

2009-01-01

Progress in Natural Science Materials International

Abstract:This review introduces the characteristics of electrical signals in higher plants and their corresponding physiological significance, and describes in detail the impact of environmental factors （e.g. light and temperature） on the electrical potential of the plants. Also, we evaluate the measurement techniques used for electrical signals in plants, including intracellular measurement, extracellular measurement, measurement of the ion channel based on the patch-clamp technique and on the non-invasive microelectrode vibrating probe technique. We also give a brief review of the applications of these methods for investigating electrical signals in plants. The ionic mechanism of electrical activity in plants is then discussed in terms of environmental response in higher plants, and this is used to provide a theoretical basis for quantitative description of the electrical signals in plants. A model for interpretation of the electrical signal mechanisms in higher plants is discussed, but further experiments are required for the verification of this model.
Design of the Measurement System for Week Electrical Signal Based of Virtual Instrument and Wavelet De-noising

陈薇,翁绍捷,王玲玲,储春华,刘虹

DOI: https://doi.org/10.3969/j.issn.1006-7205.2010.05.025

2010-01-01

Abstract:According to the plant electrical signal particularity,this design has developed the plant electrical signal gathering hypothesized instrument pilot system with the use of PMD-1208LS data acquisition card and HB-854A four channel voltage Pre-amplifier. The design takes LABVIEW as the software development platform,combined with MATLAB mix programming,and exert wavelet soft threshold de-noising. It simultaneously carries on electric potential gathering to the rubber seedling under the same temperatures by establishing 3 time of enlargements and constructing 100HZ low-pass filtering. The preliminary analysis shows that the rubber seedling electric potential signal is about 1mV after undergoing the wavelet soft threshold value noise reduction. Power spectrum ranges mostly from 0 to 20Hz,especially predominant at 10Hz.
Design of Multi-channel Monitoring System for Electrical Signals in Plants

Huang Lan,Wang Zhongyi,Xu Zhilong,Liu Zhicun,Zhao Yong,Hou Ruifeng,Wang Cheng

DOI: https://doi.org/10.3969/j.issn.1003-8892.2006.04.010

2006-01-01

Abstract:The principle of a multi-channel monitoring system based on PC for electrical Signal of plant was described. The design for acquiring electrical signal of plant and the technique to remove the disturbance was also discussed.
New approaches to study electrical signal in plant:optical recording method and Multi-Electrode Array technique

Dong-Jie ZHAO,Lan HUANG,An LIU,Lin XUE,Yang QIN,Zhong-Yi WANG

DOI: https://doi.org/10.11805/TKYDA201305.0812

2013-01-01

Abstract:Significant progress in the investigation of spatiotemporal dynamics electrical activity in plant has been enabled by recently developed electrophysiological techniques. The optical recording using Voltage-Sensitive Dyes(VSD) and Multi-Electrode Array(MEA) are the two techniques with higher spatial-temporal resolution which can observe the electrical activity from large numbers of cells simultaneously by now. In this review, the optical recording is introduced with regard to the measuring principle, the characteristics of VSD, construction of system, signal processing methods and the application in plants. Meanwhile, the intrinsic characteristics of MEA system including system composition, characteristics of electrodes, recording basis and factors involved in signal recording are presented. For the application of MEA system in the plant, there is only one case report for the electrical network activity in plant. In the future, some new scientific discoveries of spatial-temporal feature for electrical signal of plant cells population will be expected by using both advanced techniques.
Study on the Sensitive Wave Band Reflected the Message of the Electric Property and Water Potential of Leaf

朱登胜,沈杰辉,鲍一丹,何勇

DOI: https://doi.org/10.3969/j.issn.1003-188x.2008.09.037

2008-01-01

Abstract:In order to confirm sensitive frequency which ideally reflected the water supply status of plants though electric property test,the wider frequency and high sensibility instrument was adopted by complex of 1260 impedance/gain-Phase,1287 electric chemic interface and 1294 impedance interface.Cabbages was chosen as the object,and the inner relationship between water potential and electric property in the 10Hz-1MHz frequency range were inspected.Finally conclusion was got that the sensitive frequency that physiological resistance proper reflected the water supply status was under 1kHz while the band of the physiological reactance was about 25kHz.By the test of using this sensitive frequency,the relationship map of the water potential and the electric property were got.Which offer the fast judgment on the crops water lacking and give the theoretical basis of correlative instrument creating.
Development of a Portable Multi-Channel System for Plant Physiological Signal Recording

Ting Li,Zi-Yang Wang,Dong-Jie Zhao,Lan Huang,Zhong-Yi Wang

DOI: https://doi.org/10.1016/j.inpa.2016.05.001

2016-01-01

Information Processing in Agriculture

Abstract:Bioelectrical signals can reflect physiological state of organs or tissues in plants and have a significant potential value in research of plant stress tolerance. In order to study the relationship between environment factors and electrical signals in plant, a portable multi-channel physiological signal acquisition system which relevant in plant physiology research was developed. Environment parameters and electrical signals can be measured in different channels by the acquisition system simultaneously and the measurement data will be displayed in an embedded integrated touch screen which is the system processing core. The system was validated to be stable and reliable after the calibration and repeated experiments of recording electrical signals in Helianthus annuus L.
Health Status Identification and Material Damping Determination of Plants Via Non-contact Measurement and Mechanical Modelling

Bing Zheng,Zhixing Wang,Qi Lai,Benjie Ding,Ji Wang,He Zhang,Chaofeng Lü,Yangyang Zhang

DOI: https://doi.org/10.1007/s42417-023-01193-z

2024-01-01

Journal of Vibration Engineering & Technologies

Abstract:Purpose Measurement and analysis of vibration characteristics of plants are of great significance in plant health monitoring, wood material characteristic determination, etc. Currently, vibration characteristics of plants are mainly measured by contact sensors, which need a relatively complex installation procedure, and what's worse, may affect accuracy of test results. Methods In this study, vibration characteristics of Radermachera sinica , including natural frequencies and equivalent damping ratios, are contactlessly measured by a laser Doppler vibrometer (LDV). A mechanical model is developed to simulate the vibration of a plant. By combining this mechanical model with experimental data, the material damping coefficients of the vibrating plant can be determined. Finite-element analysis (FEA) is conducted, and the simulating results are compared with the mechanical model. Results Vibration data of the healthy plant with leaves (Group 1), healthy plant without leaves (Group 2), and diseased plant without leaves (Group 3) are measured and vibration characteristics are obtained by analyzing measurement data of LDV. The experiment results show that the natural frequencies of Radermachera sinica in Group 2 and Group 3 are 1.60 and 2.84 times of that in Group 1, respectively, while the equivalent damping ratios in Group 2 and Group 3 are 0.52 and 1.24 times of that in Group 1, respectively. Furtherly, the material damping coefficient is predicted by the mechanical model, and the result shows that the material damping coefficient in the diseased plant is 1.2 times of that in healthy plants. The results obtained from the FEA align well with the predictions of the mechanical model, thereby confirming the accuracy of the mechanical model. Conclusion The non-contact vibration measurement technique, combined with the mechanical model proposed in this paper, may offer a new approach to identify the health status and determine the material damping of Radermachera sinica and other plants.
A Detector for Plant Electrical Conductivity Based on Four-Electrode Method

Wang Zhuo,Li Minzan

DOI: https://doi.org/10.1166/sl.2010.1213

2010-01-01

Sensor Letters

Abstract:The electrical conductivity (EC) is an ability of material transferring electricity. The plant also has the electrical conductivity which can reflect the influence of external environment changes to plant such as temperature, humidity, illumination, and so on. At the same time, plant EC has relationship with yield and nutrient content. Therefore, measuring the plant EC effectively can provide the basis of VRT fertilizing, help the farmland management, and promote the precision agriculture development. This paper expounds the design of the plant EC detector based on Four-electrode Method. The hardware frame of plant EC detector is determined after the material and structure are chosen and the excitation current source and signal processing circuit are designed. The detector consists of the sensor part and the circuit part. Four stainless steel needles are chosen as the probe, four electrodes, and the distance between two adjacent electrodes can be adjusted. The analog circuit of the detector could produce a constant alternating current with adjustable amplitude and frequency. The signal has the characteristic of small fluctuating and good load carrying ability which satisfies the constant request of Four-electrode Method. Different kinds of plants have been tested by using this detector. The results shows that the feedback voltage signal processed by the circuit is stable and can be displayed exactly on LCD (Liquid Crystal Display) after A/D conversion and processing by MCU (Micro Controller Unit). The results also show that the output voltage signal is different from plant. It proves certain feasibility using this output signal to map plant EC.
Monitoring system for electrical signals in plants in the greenhouse and its applications

Zhong-Yi Wang,Qiang Leng,Lan Huang,Long-Lian Zhao,Zhi-Long Xu,Rui-Feng Hou,Cheng Wang

DOI: https://doi.org/10.1016/j.biosystemseng.2009.01.013

IF: 5.002

2009-01-01

Biosystems Engineering

Abstract:We have developed a multi-channel system for simultaneous monitoring of multiple environmental factors and electrical signals in cucumber plants in the greenhouse. The system includes a special sensor, which is both sensitive and reliable for long-term use for collecting electrical signals. In this work, coefficients of variability (CVs), Pearson's coefficient of correlation and intra-class correlation (ICC) procedures were applied to assess the reliability of the recorded signals. The signal amplitudes were reliable with coefficients of variation of less than 7.0% and ICCs of more than 69.3%. Using this system, we have proven that the electrical signals in plants respond to environmental changes under natural conditions in the greenhouse. The system could provide a long-term stable tool to measure and analyze the electrical signals in plants in greenhouses. (C) 2009 IAgrE. Published by Elsevier Ltd. All rights reserved.
System Design of Power Supply Quality Automatic Detection

何琳琳,窦满锋

DOI: https://doi.org/10.3969/j.issn.1005-2852.2006.01.016

2006-01-01

Abstract:This thesis expatiated the automatic detection of a few parameters on power quality.A single-chip is usedto measure the impulse width and the frequency to fix the power factor, a method using three-phase power, which hasnothing to do with connection, was applied. Aiming at the power quality, which has extensive influence, some methodsof testing these parameters are shown, but also put forward some related viewpoints concerning the future developmentof automatic test system.
Plant electrical signals: A multidisciplinary challenge

Jin-Hai Li,Li-Feng Fan,Dong-Jie Zhao,Qiao Zhou,Jie-Peng Yao,Zhong-Yi Wang,Lan Huang

DOI: https://doi.org/10.1016/j.jplph.2021.153418

IF: 3.686

2021-06-01

Journal of Plant Physiology

Abstract:<p>Plant electrical signals, an early event in the plant–stimulus interaction, rapidly transmit information generated by the stimulus to other organs, and even the whole plant, to promote the corresponding response and trigger a regulatory cascade. In recent years, many promising state-of-the-art technologies applicable to study plant electrophysiology have emerged. Research focused on expression of genes associated with electrical signals has also proliferated. We propose that it is appropriate for plant electrical signals to be considered in the form of a "plant electrophysiological phenotype". This review synthesizes research on plant electrical signals from a novel, interdisciplinary perspective, which is needed to improve the efficient aggregation and use of plant electrical signal data and to expedite interpretation of plant electrical signals.</p>

plant sciences
A SURVEY ON MEASURING METHOD FOR HARMONICS IN POWER SYSTEM

肖雁鸿,毛筱,周靖林,姜会霞,彭永进

DOI: https://doi.org/10.3321/j.issn:1000-3673.2002.06.016

2002-01-01

Abstract:In power system the harmonic measurementplays an important part. According to the basic requirement of harmonic measurement in power system the hardware formeasuring harmonics is generally described, the methodapplied to measure harmonics are analyzed and discussed.Some opinions on the developing trend of harmonicmeasurement are also put forward.
High-resolution Non-Contact Measurement of the Electrical Activity of Plants in Situ Using Optical Recording.

Dong-Jie Zhao,Yang Chen,Zi-Yang Wang,Lin Xue,Tong-Lin Mao,Yi-Min Liu,Zhong-Yi Wang,Lan Huang

DOI: https://doi.org/10.1038/srep13425

IF: 4.6

2015-01-01

Scientific Reports

Abstract:The limitations of conventional extracellular recording and intracellular recording make high-resolution multisite recording of plant bioelectrical activity in situ challenging. By combining a cooled charge-coupled device camera with a voltage-sensitive dye, we recorded the action potentials in the stem of Helianthus annuus and variation potentials at multiple sites simultaneously with high spatial resolution. The method of signal processing using coherence analysis was used to determine the synchronization of the selected signals. Our results provide direct visualization of the phloem, which is the distribution region of the electrical activities in the stem and leaf of H. annuus, and verify that the phloem is the main action potential transmission route in the stems of higher plants. Finally, the method of optical recording offers a unique opportunity to map the dynamic bioelectrical activity and provides an insight into the mechanisms of long-distance electrical signal transmission in higher plants.
Development of a Portable Meter for Detecting Chlorophyll, Nitrogen and Water Contents of Plants

韩书庆,于渤,孙明,黄文江,刘良云,孙刚

2009-01-01

Abstract:A new mathematical model for detecting the contents of chlorophyll, nitrogen and water of plants at the same time was established. Combined with the theory of spectroscopy, a portable meter for detecting the contents of chlorophyll, nitrogen and water in crop leaves was developed, which could avoid the error caused by different measuring time and different measuring location on the leaves when the three measuring parameters were accomplished by different instruments. The measurement result could give a better suggestion to precision fertilization and irrigation. The developed meter was composed of NIR (near infrared) LED (light emitting diode), interference filter, photodetector and microprocessor system.
A Review on Leaf Temperature Sensor: Measurement Methods and Application

Lu Yu,Wenli Wang,Xin Zhang,Wengang Zheng

DOI: https://doi.org/10.1007/978-3-319-48357-3_21

2016-01-01

Abstract:Leaf temperature is the guarantee for the plant to carry out the life activities and closely related to plants’ healthy growth and crops’ planting management. The accurate measurement of leaf temperature is significant to understand the physiological condition, guide farmland irrigation, select variety and forecast production, etc. The development of plant leaf temperature measurement and requirements of application in recent years at home and abroad were briefly summarized and reviewed in the paper. Firstly, the status of application research and achievements of leaf temperature were introduced from the methods of measurement and scientific experiments. Then it analyzed and compared the principle, advantages and disadvantages and measurement of several common methods in detail including thermal resistance measurement, thermocouple measurement, infrared temperature measurement, infrared thermal imaging measurement and the leaf temperature model. At last, some problems urgently needed to be solved and the development direction of the field were presented, which could provide a reference for the further study of the leaf temperature sensor.
A Mathematical Model and Its Experimental Study for a Kind of Measurement Method of Soil Electric Conductivity

Sun Yurui,WANG Maohua

DOI: https://doi.org/10.3321/j.issn:1002-6819.2001.02.006

2001-01-01

Abstract:The measurement of soil electrical conductivity has been increasingly gaining attentions because precision farming technologies rely on accurate field maps of the soil characteristics that affect field. In this paper, a mathematical model for four-electrode measurement method was developed. The discussion concerned with the model consists of three steps. At first, the behavior of single current electrode at a depth of field was treated. Secondly, a combination of two current electrodes at a depth of field was analyzed and some formulas used for different configurations of electrodes were developed. At last, a lemma associated with this model was proven. In addition, some experiment results and a general conclusion referring to this study were presented.

Measurement Methods for Basic Research of Plant Electrical Signal

Study of plant water lack message based on electric property and water potential of leaf

Design of Measurement System for Electrical Signal in Plant Based on Virtual Instrument

Computing Methods in Analyzing Plant Electrical Signal

Detection Of Electrical Signal Of Plant With Four-Electrode Method

Research Progress on Electrical Signals in Higher Plants

Design of the Measurement System for Week Electrical Signal Based of Virtual Instrument and Wavelet De-noising

Design of Multi-channel Monitoring System for Electrical Signals in Plants

New approaches to study electrical signal in plant:optical recording method and Multi-Electrode Array technique

Study on the Sensitive Wave Band Reflected the Message of the Electric Property and Water Potential of Leaf

Development of a Portable Multi-Channel System for Plant Physiological Signal Recording

Health Status Identification and Material Damping Determination of Plants Via Non-contact Measurement and Mechanical Modelling

A Detector for Plant Electrical Conductivity Based on Four-Electrode Method

Monitoring system for electrical signals in plants in the greenhouse and its applications

System Design of Power Supply Quality Automatic Detection

Plant electrical signals: A multidisciplinary challenge

A SURVEY ON MEASURING METHOD FOR HARMONICS IN POWER SYSTEM

High-resolution Non-Contact Measurement of the Electrical Activity of Plants in Situ Using Optical Recording.

Development of a Portable Meter for Detecting Chlorophyll, Nitrogen and Water Contents of Plants

A Review on Leaf Temperature Sensor: Measurement Methods and Application

A Mathematical Model and Its Experimental Study for a Kind of Measurement Method of Soil Electric Conductivity