Abstract:To predict the dynamic precision of multilink high-speed precision presses (MLHSPPs), it is essential to develop a dynamic model of the multilink mechanism (MLM). Previous models only considered the effect of the clearance, flexible linkages and crank shaft, and often neglected the effect of supporting bearings’ stiffness on the crank shaft system, which lowers the dynamic analysis accuracy of the MLM for MLHSPPs. In this work, based on both absolute nodal coordinate formulation (ANCF) and finite element method (FEM), an improved computational methodology for the modeling and simulation of a planar flexible MLM with clearance and spindle-bearing structure is presented considering the effect of clearance, flexibility of crankshaft and linkage, and bearing stiffness together, and its corresponding dynamic dimension chain between the slider and crank shaft is constructed. The elastic foundation model (EFM) and stick–slip friction model are used to describe the normal contact and tangential friction force between bushing and pin, respectively. It is demonstrated that the dynamic responses from the flexible model with clearance and spindle-bearing structure under no-load and blanking conditions agree better with the experimental data than those from traditional ones, and the effectiveness of the proposed methodology is proven. The existence of crankshaft-bearing structure aggravates the displacement deviation of slider and the motion of the pin center for revolute joint between lower slider and linkage was characterized by only one permanent contact state. Furthermore, the effect of the clearance size, the blanking force and the contact angle of the bearing on the dynamic responses and the corresponding deviation errors are also investigated.

Dynamic Characteristics Research of Different Working Mechanism of Turret Punch Presses

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator

Kinematics and dynamicsanalysis for slotting machine six bar linkage

Discussion of the rationality of working mechanism of mechanical presses

The Design of Drive Mechanism for Precision Press Based on Non-circular Gears

Hydraulic Systems Control Based on the Characteristics of Major-Motion Mechanism for an Open-Die Forging Manipulator

Thermo-Mechanical Coupling Analysis of the Actuating Mechanism in a High Speed Press

Investigation on the design of hydraulic high-speed punching press with a large press force and a long press stroke

Simulation Analysis of Upper Mould Base for High Speed Punch

Thermo-mechanical Coupling Analysis of a High-Speed Actuating Mechanism Based on a New Thermal Contact Resistance Model

Type Synthesis and Optimization of Main Driving Mechanism for Servo-punch Press

Kinematic and Dynamic Analyses of the Multi-Actuated Mechanical Press with Parallel Topology

Research on Kinematics and Dynamics of New-mode 200 kN Double-motor Servo Direct Driving Turret Press

Dynamic modeling and analysis of hybrid driven multi-link press mechanism considering non-uniform wear clearance of revolute joints

Optimal Design of a Main Driving Mechanism for Servo Punch Press Based on Performance Atlases

Effect of Preload on Frame Stiffness of 1600 kN Closed Double Point Mechanical Press

Research on Dynamic Characteristics of Close-combined Pre-tightened Frame in the High-speed Precise Press

Optimization of Pressure Side Slider Series Four bar Linkage Working Mechanism Used by Double action Press

Dynamic modeling and error analysis of planar flexible multilink mechanism with clearance and spindle-bearing structure

Kinematic Optimal Design of a Double-Knuckle Mechanism for Servo Punch Press Based on Performance Atlases

Modular Analysis of Kinematics Performances for Multi-Link Mechanical Presses