Coupled Sensitivity Analysis and Design Optimization for Thermo-Structural Systems *
顾元宪,刘涛,亢战,赵国忠
DOI: https://doi.org/10.3321/j.issn:0459-1879.2004.01.006
2004-01-01
Abstract:Thermo-structural systems abound in many industrial engineering such as aerospace and aeronautical engineering, thermodynamic machinery, electronic devices and material engineering. The thermal responses of such system, e.g. thermal displacements, stresses, and buckling are commonly the predominant factors in the design phase. Therefore a comprehensive design of thermo-structural system should take the heat conduction and the structural mechanics into account simultaneously. However in some former researches, the designers had to adopt some simplified methods when conducting the optimal design of such system in order to reduce the problem difficulties. For example, the common way was to neglect the coupled effects of the two disciplines in the phases of sensitivity analysis and design optimization. In fact, the rationality of the simplified methods is questionable. Over the past two decades, the sensitivity analysis and design optimization for structural system have gained fruitful achievements, which also placed a solid foundation and offered possible ways for design optimization of thermo-structural system. This investigation makes an attempt to extend the mature techniques to the design optimization of thermo-structural systems, based on which, further attentions may be paid to the design optimization for other kinds of structural multidisciplinary systems such as electro-structural, magneto-structural, acoustic-structural systems. Two kinds of sensitivity analysis problems are considered in the present research using the direct and the adjoint methods. One is the coupled sensitivity analysis and design optimization of thermal stresses problem. In this respect, many contributions, Ref[3] and references therein, have been published. But most of their attentions were paid to the deduction of sensitivity equations by employing the continuum model (based on the partial differential equations) and neglected the discussions of solution methods. This paper present a set of clearer and more concise deductions for the sensitivity analysis based on the finite element equations, which are suitable for the computer implementations. The other is the coupled sensitivity analysis of thermal buckling problem. There are limited references in this field. Ref[4] discussed the uncoupled thermal buckling problem for the laminated composites. Ref[5] considered the coupled effects but didn’t offer procedures on the sensitivity analysis. We present the coupled sensitivity equations in detail for the thermal buckling problem. Based on the results of sensitivity analysis, the mathematical optimization model is constructed and solved by SLP/SQP algorithms. The computer implementations are performed on the software platform-JIFEX, which incorporates size design variables, shape design variables, the technique of semi-analytical sensitivity analysis and the geometrical modeling techniques. The implemented software system can be applied to the general purposes design optimization for the plane, axi-symmetric, and complex thin-walled thermo-structural problems. Numerical examples are employed to validate the present methods and reveal the necessity of coupled sensitivity analysis.