Abstract:This paper integrates a monitoring practice for the construction of a long-span continuous girder bridge to explore strain measurement and geometric shape control technology. In doing so, the actual stress of the bridge in the cantilever-construction stage is identified, and the influence of ambient temperature on the geometric shape control of the main girder is eliminated. According to linear creep theory, a strain correction method based on the superposition principle is proposed to remove the strain induced by concrete shrinkage and creep. By identifying the pattern of the solar thermal effect on the main girder geometry, a double in-situ measurement interpolation method is proposed to predict the adjusted value of formwork erection elevation. The results show that the deviation between the measured and corrected stress values on the root section of the main girder under the maximum cantilever state of the main girder is 16%–23%, which verifies the necessity of strain correction. The corrected values of measured stress on each controlled section are essentially identical to the calculated values, and both have consistent change patterns throughout the construction process, which verifies the validity of the strain correction method. During the cantilever-construction stage, the vertical deformation of the main girder owing to the solar thermal effect is parabolic and significant; hence, the main girder geometry should be measured prior to sunrise. The double in-situ measurement interpolation method can effectively eliminate the adverse effects of solar thermal when lofting the vertical formwork elevation in a non-ideal period.

Bragg Grating Strain Measurements During the Construction of A Prestressed Concrete Girder Bridge

Testing of a Prestressed Concrete Girder to Study the Enhanced Performance of Monitoring by Integrating Optical Fiber Sensors

Loading Tests on Concrete Beams Prestressed With Glass Fiber Tendons

Continuous Monitoring of the Vlassenbroek Bridge

Strain Monitoring of Dual-Room Box-Girder During Prestressing Tension Based on Fiber Bragg Grating Sensor

The Synchronous Monitoring of Girder Strain During the Prestressing Construction of Long Span Rigid Frame-Continuous Beam Bridge Based on FBG Sensors

Load and Deformation Monitoring of Composite Pressure Vessels by Means of Optical Fibre Sensors

DYNAMIC BEHAVIOR OF THREE-SPAN CONTINOUS STONE ARCH BRIDGE MEASURED BY FIBER BRAGG GRATING (FBG) SENSORS

APPLIED RESEARCH ON MONITORING TENSION OF PRESTRESSED CONCRETE BEAM BASED ON FBG SENSING TECHNOLOGY

Research On Reinforced Concrete Structural Strain Monitoring By Fiber Bragg Grating

Investigation of fiber Bragg grating sensor measurability in concrete beams under static load conditions

Application of Fiber Grating Sensor on Experiment of Bridge Pier Model

Determination of Internal Strain of Concrete Beam Using Fiber Bragg Grating Sensors

Prestressing Force Monitoring Method for a Box Girder Through Distributed Long-Gauge FBG Sensors

Engineering Approach to In-Situ Bridge Health Monitoring with Fiber Bragg Gratings

Key Construction Monitoring Technology for Long-Span Continuous Girder Bridge

Transition between Measured Strain and Stress in Prestressed Concrete Continuous Rigid Frame Bridge

Vibration-based structural health monitoring from operational long- gauge fiber optic strain data

Bragg Grating Laser Sensing Systems for Smart Structures

Structural Health Monitoring of a Tall Building during Construction with Fiber Bragg Grating Sensors

Inference of Bond Slip in Prestressed Tendons in Concrete Bridge Girders