Abstract:Abstract In this study a Neural Network based fault tolerant control is proposed to accommodate oil leakages in a magnetorheological suspension system based in a half car dynamic model. This model consists of vehicle body (spring mass) connected by the MR suspension system to two lateral wheels (unsprung mass). The semi-active suspension system is a four states nonlinear model; it can be written as a state space representation. The main objectives of a suspension are: Isolate the chassis from road disturbances (passenger comfort) and maintain contact between tire and road to provide better maneuverability, safety and performance. On the other hand, component faults/failures are inevitable in all practical systems, the shock absorbers of semi-active suspensions are prone to fail due to fluid leakage but quickly detect and diagnose this fault in the system, avoid major damage to the system and ensure the safety of the driver. To successfully achieve desirable control performance, it is necessary to have a damping force model which can accurately represent the highly nonlinear and hysteretic dynamic of the MR damper. To simulate parameters of the damper, a quasi-static model was applied, quasi-static approaches are based on non-newtonian yield stress fluids flow by using the Bingham MR Damper Model, relating the relative displacement of the piston, the frictional force, a damping constant, the stiffness of the elastic element of the damper and an offset force. The Fault detection and isolation module is based on residual generation algorithms. The residua r is computed as the difference between the displacement signal of functional and faulty model, when the residual is close to zero, the process is free of faults, while any change in r represents a faulty scheme then a wavelet transform, (Morlet wave function) is used to determine the natural frequencies and amplitudes of displacement and acceleration signal during the failure, this module provides parameters to the neural network controller in order to accommodate the failure using compensation forces from the remaining healthy damper. The neural network uses the error between the plant output and the neural network plant for computing the required electric current to correct the malfunction using the inverse dynamics function of the MR damper model. Consequently, a bump condition, and a random profile road (ISO 8608) described by the power spectral density (PSD) of its vertical displacement, is used as disturbance of control system. The performance of the proposed FTC structure is demonstrated trough simulation. Results shows that the control system could reduce the effect of the partial fault of the MR Damper on system performance.

Neural network control for semi-active hydraulic suspension

Integrated Model Predictive Control and Adaptive Unscented Kalman Filter for Semi-Active Suspension System Based on Road Classification

A Sliding Mode Semi-Active Control for Suspension Based on Neural Network

On Fuzzy Control Strategy of Nonlinear Semi-Active Suspension System

A novel DNFS control strategy for vehicle semi-active suspension system

Neural networks-based adaptive dynamic surface control for vehicle active suspension systems with time-varying displacement constraints

Control and Simulation of Semi-Active Suspension Based on MRF Damper

Nonlinear Control of Hydro-Pneumatic Active Suspension

An investigation into the use of neural networks for the semi-active control of a magnetorheologically damped vehicle suspension

Neural Network Based Fault Tolerant Control for a Semi-Active Suspension

A Sliding Mode Semi-Active Control of Suspension System Subject to Uncertainties

Bioinspired Nonlinear Dynamics-Based Adaptive Neural Network Control for Vehicle Suspension Systems With Uncertain/Unknown Dynamics and Input Delay

Intelligent Motion Tracking Control of Vehicle Suspension Systems With Constraints via Neural Performance Analysis

An adaptive backstepping control strategy based on radial basis function neural networks for the magnetorheological semi-active suspension

Variable universe fuzzy control for vehicle semi-active suspension system with MR damper combining fuzzy neural network and particle swarm optimization

Research on Two-Stage Semi-Active ISD Suspension Based on Improved Fuzzy Neural Network PID Control

Vibration Performance Optimization of the Semi-Active Suspension with Fuzzy Control Method

Simulation and Study on the Control of Vehicle Semi-Active Suspension System

Research on a Novel Semi-active Suspension System Based on EHA

Fuzzy Control and Simulation of Semi-Active Suspension on a Vehicle

An adaptive robust sliding mode control strategy based on radial basis function neural networks for the magnetorheological semi-active suspension