Abstract:High-performance vertical vibration isolators are required in precision instruments and physical experiments to reduce the seismic noise, which limits the instrument performance and measurement results. For example, inertial references are needed in interferometric gravitational wave detectors and absolute gravimeters, in order to separate the useful signal from noise. Microseisms typically occur at around 0.07 Hz. The secondary microseisms occur at about 0.14 Hz. Buildings usually wobble at frequencies between 0.1 and 1 Hz. To reduce all these vibrations would require a spring-mass system with a resonance frequency lower than 0.05 Hz. The most commonly applied techniques use a passive vertical isolation system, which is easy to set up and cheap to build. However, to achieve low cut-off frequency, such as 0.05 Hz, there requires longer than 100 m static deflection for a simple passive isolator, which is impractical in most applications. An ultra-low-frequency active vertical vibration isolator, based on a two-stage beam structure, is proposed and demonstrated in this paper. Two beams are connected to a frame with flexural pivots. The upper beam is suspended from the frame with a normal hex spring. The lower beam is suspended from the upper one by a zero-length spring. The flexural pivots of the upper beam are not vertically placed above the pivots of the lower beam. With this special design, the attachment points of the zero-length spring to the beams can be moved to change the effective stiffness. A laser reflectometry is used to detect the angle between the two beams. A laser collimator, a mirror, a beam splitter and an optical detector are fixed to the upper beam, and another mirror is fixed to the lower beam. A laser beam from the collimator is directed to the detector via the mirrors and the beam splitter. The output of the detector is proportional to the angle between the two beams. The minimum detectable angle is 36 nrad. The angle signal is sent to a circuit to generate a control signal, which drives a voice coil mounted between the lower beam and the frame to maintain the angle between the two beams to a fixed value. The isolation system can achieve a natural period of 100 s by carefully adjusting the attachment points of the zero-length spring and the feedback parameters. This type of isolator has a simpler and more robust structure than the famous active vibration isolator-the super spring. The system is promising in applications such as precision instruments and experiments, especially in absolute gravimeters.

Recent advances in ultra-low frequency precision isolation system

Modeling and Analysis of a High-Static-low-dynamic Stiffness Vibration Isolator with Experimental Investigation

Force and displacement transmissibility of a quasi-zero stiffness vibration isolator with geometric nonlinear damping

On the Analysis of A Piecewise Nonlinear-Linear Vibration Isolator with High-Static-Low-Dynamic-Stiffness under Base Excitation

BASIC THEORY AND TECHNOLOGY IN THE ACTIVE VIBRATION ISOLATION OF PRECISION DEVICES

Comparison of the Dynamic Performance of Nonlinear One and Two Degree-Of-Freedom Vibration Isolators with Quasi-Zero Stiffness

Design and Analysis of a Vibration Isolator with Adjustable High Static–Low Dynamic Stiffness

Study on New Type Vibration Isolation System Based on Combined Positive and Negative Stiffness

Modeling and analysis of a two-stage tri-linear pendulum ultra-low frequency horizontal vibration isolator with experimental investigations

Analysis and Experimental Study on Dynamic Characteristics of an Integrated Quasi-Zero Stiffness Isolator

Active Low-frequency Vertical Vibration Isolation System for Precision Measurements

The Design and Analysis of a Novel Passive Quasi-Zero Stiffness Vibration Isolator

Quasi-zero-stiffness vibration isolation: Designs, improvements and applications

An innovative design of parabolic cam-roller quasi-zero-stiffness isolators for ultralow frequency vibration isolation

Recent Advances in Quasi-Zero Stiffness Vibration Isolation Systems: An Overview and Future Possibilities

Ultra-Low-Frequency Vertical Vibration Isolator Based on A Two-Stage Beam Structure

Design and Tests for a New Type Nonlinear Low-Frequency Passive Vibration Isolation System

Design Of An Active Low Frequency Vibration Isolation System For Atom Interferometry By Using Sliding Mode Control

Design and experimental study of a two-stage nonlinear vibration isolators with quasi-zero stiffness

Isolation Performance of the Quasi-Zero Stiffness Isolation System Enhanced by Mixed Tuned Inerter Damper

Low-frequency vibration isolation via new wide range zero-stiffness isolator with multiple negative stiffness mechanisms