Abstract:As optical networks advance toward a dynamic multiwavelength all-optical structure, all optical wavelength conversion technologies become vital in the efficient utility of available fiber bandwidth. Experimental demonstrations of optical wavelength conversion usually involves a nonlinear element to transfer the information from the signal wavelength to that of a local laser source. In the case of Non-return-to-zero (NRZ) signals, the local laser source is usually a CW narrow linewidth semiconductor laser. For Return to Zero (RZ) signals, the local laser sources commonly employ a modelocked fiber laser or a modelocked semiconductor laser or a gain switched DFB to generate low jitter optical clock. Various materials and devices can be used as the nonlinear element for wavelength conversion, with the two most common being the optical fiber and semiconductor optical amplifier, though Lithium Niobate has also attracted attention in recent years as a switching element. The advantage of using optical fiber for wavelength conversion is that it is relatively cheap and has low levels of noise. However, the switching energy required to generate the nonlinearity in optical fiber is high compared to that of the SOA [1]. Wavelength conversion using SOA typically uses either four-wave mixing or crosses gain/phase modulation, with the latter method often used in conjunction with an interferometric topology [2]. The advantages of cross phase modulation of SOA in interferometers are the relatively low switching energy required, the fast switching speed, and the ability to integrate the whole structure on a single substrate.

Wavelength Conversion Using Gain-clamped Semiconductor Optical Amplifier

Simulation And Design Of Monolithically Integrated Tunable Wavelength Converter Based On V-Cavity Laser And Delayed Mach-Zehnder Interferometer

Phase compensation effect of semiconductor optical amplifiers

Implementation of phase compensation using semiconductor optical amplifiers

The gain and chirp of all optical wavelength converters based on cross-gain modulation in semiconductor optical amplifier

Theoretical Study on All-Optical Boolean Calculation Based on Nonlinear of Semiconductor Optical Amplifier

Chirping and Transmission Characterizations of Wavelength Converter Based on CPM in an SOA

All optical wavelength conversion for 2.5Gb/s return-to-zero optical pulse based on cross-gain modulation in soa

All-Optical Wavelength Conversion Using Widely Tunable V-Cavity Semiconductor Laser

Chirp Performance of Converted Signal in Wavelength Conversion Based on Cross-Gain Modulation in SOA

Effects Of Gain Modulation On Wavelength Conversion Using Four-Wave Mixing In Semiconductor Optical Amplifiers

Numerical Simulation of Recovery Enhancement by a CW Pump Light in Semiconductor Optical Amplifiers

Integrated Wavelength Conversion for Adaptively Modulated WDM-OFDM Signals in a Silicon Waveguide

Bandwidth enhancement and response flattening of cascaded sum- and difference-frequency generation-based wavelength conversion

Wavelength Conversion Using SOAs: Simulations and Experiment

Chirped Optical Superlattices for Broadband Wavelength Conversion

The Wavelength Conversion for 2.5 Gbit/s, Return-to-zero Optical Pulse

Transparent Wavelength Conversion for a Novel Orthogonal FSK/IM Modulation Format at 40-Gb/s Based on FWM Effect of SOA

Photon Iterative Numerical Technique for Steady-State Simulation of Gain-Clamped Semiconductor Optical Amplifiers

All-optical NRZ Wavelength Conversion Based on a Single Hybrid III-V/Si SOA and Optical Filtering.

Study on Extinction Ratio Equalization of Up/Down Wavelength Conversion Based on Cross-gain Modulation in Semiconductor Optical Amplifier