Abstract:A new design concept of highly-loaded axial flow compressor by applying boundary layer suction and 3D blade technique was proposed in this paper. The basic idea of this design concept was that low reaction was adopted as while as increasing the rotor's geometry turning angle, so that the boundary layer separation of a rotor could be eliminated and the rotor was kept working in high efficiency. This design concept would greatly increase the stator's geometry turning angle, so boundary layer suction on stator cascades was adopted in order to restrain the boundary layer separation. In some situations, 3D blade technique was also applied in order to control the boundary layer separation more efficiently. The advantages of the above design concept were: the compressor's pressure ratio was increased remarkably; boundary layer suction was only adopted in stator cascades so as to reduce the complexity of boundary layer suction structure.The key techniques of the new design concept were also explained in this paper. In order to increase the compressor's pressure ratio, the geometry turning angle of rotor was increased greatly, and the rotor inlet was prewhirled to reduce the rotor's reaction so as to restrain the rotor's boundary separation. Boundary layer suction was carried out in the stator cascades (mainly on suction side), hub and shroud in order to control the flow separation. 3D blade technique could be adopted if necessary.The limitation of the application of this design concept was also pointed out through the analysis of the Mach number at rotor inlet, the prewhirl angle of rotor, the work distribution along span wise and the control method of stator separation.Numerical simulation was carried out on a single low-reaction compressor stage with IGV in order to demonstrate the new design concept. By using boundary layer suction and 3D blade technique, the energy loss in stator cascades was greatly reduced and the whole stage's isentropic efficiency was about 90%. The low-reaction stage's aerodynamic load was double than conventional design. The boundary layer separation could be effectively controlled by proper combination of boundary layer suction and bowed or twisted blade. The numerical result proved that the new design concept was feasible and had a wide application area.

Design and Optimization of Boundary Layer Suction Configurations Within a Highly-Loaded Diffusion Stator

A New Design Concept of Highly-Loaded Axial Flow Compressor by Applying Boundary Layer Suction and 3d Blade Technique

Application of Complex 3D Aerodynamic Layout in Highly Loaded Compressor on Numerical Simulation

Effects of Boundary Layer Suction on the Flow Characteristic in a Highly-Loaded Compressor Cascade With Clearance

Effects of Boundary Layer Suction on the Flow Field of Large Turning Angle Stator Cascade

An Investigation on Separation Configurations in Compressor Cascades with Boundary Layer Suction (BLS)

Numerical investigation of boundary layer suction on certain highly loaded aspirated compressor at low speeds

Flow characteristics on a 4-stage low-speed research compressor with a cantilevered stator

Redesign of a Transonic Compressor Stage Using Highly Loaded Bowed Stator

Flow Characteristics of a Low-Solidity Cantilevered Stator Embedded in a 4-Stage Low-Speed Research Compressor

Bowed Stators: An Example of CFD Applied to Improve Multistage Compressor Efficiency

Optimization Design of Variable Fillet for Different Boundary Thicknesses in a Highly Loaded Compressor Cascade

Effect of Blade Bowing and Local Modification on High-Turning Angle Compressor Stator Performance

Effects of Boundary Layer Suction on the Performances of Compressor Cascades

Analysis of the Aerodynamic Performance of a Super-highly Loaded Adsorption Type Compressor Cascade

Aerodynamic Design and Analysis of a Low-reaction Axial Compressor Stage

Application of High-Turning Bowed Compressor Stator to Redesign of Highly Loaded Fan Stage

Numerical Investigation of the Effect of Stator Clocking on Blade Boundary Layer Flow in Compressor

Hub Clearance Effect in the Design Space of the Cantilevered Stator Embedded in a 4-Stage Low-Speed Research Compressor

Highly-Loaded Low-Reaction Boundary Layer Suction Axial Flow Compressor

Three-Dimensional Compressor Blading Design Improvements in Low-Speed Model Testing