Abstract:The octaammonium chloride salt of octaaminopropyl polyhedral oligomeric silsesquioxane (OapPOSS) was synthesized via the hydrolytic condensation of γ-aminopropyltrimethoxysilane in the methanol solution catalyzed by concentrated hydrochloric acid and was further used as the intercalating agent to modify sodium montmorillonite (MMT). X-ray diffraction (XRD) data indicate that the MMT was successfully intercalated by the ammonium of OapPOSS, as evidenced by the fact that the basal spacing of MMT galleries was expanded from 1.3 to 1.7nm. The intercalation method used here introduced only the octaammonium POSS salt in contrast to the introduction of all hydrolyzed products from γ-aminopropyltriethoxysilane (APTEOS). The POSS-modified MMT was exploited to prepare the epoxy-MMT nanocomposites. Using a two-step technique, the disorderly exfoliated epoxy-MMT nanocomposites were obtained. XRD studies showed that the formation of the nanocomposites in all the cases with the disappearance of the peaks corresponding to the basal spacing of MMT. Transmission electronic microscopy (TEM) was used to investigate the morphology of the nanocomposites and indicates that the nanocomposites are comprised of a random dispersion of intercalated/exfoliated aggregates throughout the matrix. Differential scanning calorimetry (DSC) indicates that the glass transition temperatures of the as-prepared epoxy-MMT nanocomposites remained invariant in comparison with that of the control epoxy when the POSS-MMT content is less than 10wt%. However, the nanocomposite containing 15wt% of POSS-MMT displayed a decreased Tg, which could be attributed to the incomplete curing reaction resulting from the POSS-MMT loading. Thermogravimetric analysis (TGA) shows that the incorporation of POSS-MMT into epoxy networks displayed an apparent improvement in the thermal stability, and the char residue increased with increasing the concentration of POSS-MMT.

Preparation of Montmorillonite by Two-step Intercalation and Its Effect on the Corrosion Resistance of Epoxy Coatings

NOVEL ORGANIC MODIFICATION OF MONTMORILLONITE BY SOLID-STATE REACTION WITH EPOXY COMPOUND

Preparation and Corrosion Resistance of OMMT/EP Composite Coatings in Sulfur-Containing Sodium Aluminate Solution

Triglycidyl Para -Aminophenol Modified Montmorillonites for Epoxy Nanocomposites and Multi-Scale Carbon Fiber Reinforced Composites with Superior Mechanical Properties

Preparation and Characterization of Epoxy/Montmorillonite Nanocomposites

Influence of the Addition of Montmorillonite in an Epoxy Powder Coating Applied on Carbon Steel

Study on Organic Montmorillonite Reinforced Epoxy Nano-composite

Effect of montmorillonite modified with different intercalator on the protection property of sol-gel coating on AZ31B magnesium alloy

Co-intercalation of Montmorillonite by Poly(oxypropylene) Amine Hydrochlorides with Different Chain Length

Anticorrosive Properties of Epoxy/Polyurethane IPNs Coatings Modified by Organic Montmorillonite

Epoxy Resin Nanocomposites Prepared by Organic Montmorillonite Bearing Carboxyl Groups

Preparation of modified montmorillonite/graphene oxide composites to enhance the anticorrosive performance of epoxy coatings

Montmorillonite Intercalated by Ammonium of Octaaminopropyl Polyhedral Oligomeric Silsesquioxane and Its Nanocomposites with Epoxy Resin

STUDY ON PREPARATION AND PROPERTIES OF EPOXY AND ORGANIC MONTMORILLONITE NANOCOMPOSITES CURED BY ANHYDRIDE

Preparation of Cu/OMMT/LLDPE Nanocomposites and Synergistic Effect Study of Two Different Nano Materials in Polymer Matrix

Effect of organic montmorillonite on epoxy curing kinetics

A Facile Method of Preparing Sandwich Layered TiO2 in Between Montmorillonite Sheets and Its Enhanced UV-light Photocatalytic Activity

Characterization and Anticorrosive Properties of Poly(2,3-Dimethylaniline)/na+-montmorillonite Composite Prepared by Emulsion Polymerization

Effects of Organo-Montmorillonite Dispersion on Thermal Stability of Epoxy Resin Nanocomposites

Intercalation and Exfoliation Behavior and Mechanical Properties of Nano-Montmorillonite/Epoxy Composite

Superstructure of Quaternary Ammonium Modified Montmorillonite and Its Antibacterial Properties