Abstract:In order to improve the cutting performance of the hourglass worm gear hob and improve the cutting conditions of the teeth on both sides, it is necessary to constrain the absolute value of the rake angle of each tooth to be small and control the balance of the rake angles on the left and right sides. Based on the principle of enveloping tooth surface formation (Dong, 1989; Wu, 2009), this paper proposes a method of forming a spiral groove rake face with a variable transmission ratio, so that the rake face of each tooth is formed in segments to achieve the design requirements of small absolute value and balance on both sides. Taking the basic worm speed ω of the hob, the moving speed v of the machine tool cutter, and the installation offset Δx of the cutter as experimental factors, taking the rake angle on both sides of five teeth of the hob as response values, a three-factor three-level response surface analysis method is used to establish mathematical models between each experimental factor and the rake angle on both sides, and analyze the interaction between each factor. The results show that: The order of influence of the three selected factors on the rake angle on both sides is: basic worm speed, machine tool cutter moving speed, cutter installation offset; optimize and obtain the optimal parameter combination for each of five teeth in a spiral groove, perform simulation processing and measure rake angle. The results show that the rake angles on both sides of five teeth are controlled within ±0.3°, which is 94% lower than that when five teeth are processed simultaneously with a fixed transmission ratio. This indicates that rake faces of small rake angle can be designed by optimizing processing parameters, which is conducive to improving and balancing the cutting performance of hobs.

Optimization of Worm Gearing's Geometric Parameters Under the Condition of the Errors and the Load

Multi-objective optimization design of dual-cone double enveloping hourglass worm gear pair

Meshing analysis and optimization for plane-generated enveloping toroid hourglass worm drive

Optimal design for an end face engagement worm gear with multiple worm-wheel meshing

Mismatched gearing composed of hourglass worm and spur gear: Meshing theory, tooth contact simulation, comprehensive design

Meshing control of the double-enveloping hourglass worm gearing under the conditions of existing the errors and the load

The Study and Analysis of a New Anti-backlash Worm Gear

Study on the tooth profile and meshing equation of the anti-backlash double-roller enveloping hourglass worm with errors

Theoretical modeling and transmission characteristics analysis of a novel double-roller hourglass worm drive based on enveloping principle

Meshing analysis of mismatch toroidal worm gearing characterized by different basic parameters of hob and worm

Optimization of the Loaded Contact Pattern of Spiral Bevel and Hypoid Gears Based on a Kriging Model

Investigation on the Backlash of Roller Enveloping Hourglass Worm Gear: Theoretical Analysis and Experiment

An Analysis of Load-Bearing Capacity of Gearing with Small Teeth Number Difference and its Volume Optimization

Computerized simulation of tooth contact and error sensitivity investigation for ease-off hourglass worm drives

Optimization of Topological Modification Parameters for Heavy-Duty Helical Gears

Study on the meshing evolving mechanism of a novel self-evolution hourglass worm drive

Parametric analysis of the end face engagement worm gear

Study on meshing performance of a novel point-contact hourglass worm drive based on modified involute

Design of transmission accuracy of the involute cylindrical gear-worm gear system under large temperature difference based on FE method

Design method and parameter optimization of small angle rake face of hourglass worm gear hob