Abstract:This work examined liquefaction of polypropylene into liquid products in the presence of ethanol with particular attention to the effect of temperature (325-400 & nbsp;C), residence time (1-6 h) and solvent/feedstock mass ratio (1/ 1-4/1) on the overall product distribution, and composition of the oil products. The oil products obtained under the optimal reaction condition contained mainly alkanes, alkenes, alcohols and aromatics, which accounted for 42.41%, 22.81%, 3.51%, 1.05%, respectively. Increasing temperature and retention time enhanced aromatization reaction leading to increased yields of aromatic hydrocarbons. The higher heating value of the oil product was 45.72 MJ/Kg, which is comparable to the higher heating value (HHV) of gasoline. Volatility analysis shows that 50-85 wt% of the oil composition had similar boiling point range as gasoline (35-185 C). These characterization results suggest that the oil could be used as a raw material for gasoline blendstock or chemicals. The interaction of three reaction parameters on the oil formation was further evaluated by the response surface method. Through the Box-Behnken design, the R-2, F-value and p-value of analysis of variance were 0.9917, 93.20, and < 0.0001, respectively, showed that the model fitted well with actual experimental value. It is suggested that the reaction temperature affect the oil yield more significantly, compared to other two parameters. The response surface analysis showed that under the temperature of 376.7 C, residence time 3.8 h and solvent/feedstock mass ratio of 1/1, oil yield of 98.32 wt% can be achieved without adding catalyst or hydrogen. This predication was also verified by experiment.

Effect of Ethanol on Lycopene Extraction

Ethanol Treatment Improves the Sensory Quality of Cherry Tomatoes Stored at Room Temperature

Effects of Process on Ethanol Lixiviation Rate of Schisandra Chinensis(Turcz.) Baill.

Study on the methods of extraction and determination of lycopene contents in watermelon

Effects of modifiers on the profile of lycopene extracted from tomato skins by supercritical CO2

Synergic Effects of Cellulase and Pectinase on Extraction of Lycopene from Tomato

Effects of components in lignocellulosic ethanol fermentation broth on ethanol transfer through polydimethylsiloxane-silicalite-1 pervaporation membrane

Optimizing Extraction of Lycopene from Tomato Skin

Studies on Extracting Lycopene from Tomato with Alcohol and Enzymes

Optimization of Operating Parameters for Supercritical Carbon Dioxide Extraction of Lycopene by Response Surface Methodology

Effects of Supercritical Fluid Extraction Parameters on Lycopene Yield and Antioxidant Activity

Influence of temperature, residence time, and solvent/feedstock mass ratio on overall product distribution and oil products quality in ethanol liquefaction of 230 polypropylene impact copolymer

Synergistic Effects of Combinatorial Lactiplantibacillus Plantarum Fermentation and Vegetable Oils Supplementation on the Lycopene Level, Antioxidant Capacities and Flavor Volatiles of Tomato Pulp

Studies on the Extraction of Lycopene from Tomato

Studies on the Mechanism of Efficient Extraction of Tea Components by Aqueous Ethanol.

Enhancing Lycopene Stability and Bioaccessibility in Homogenized Tomato Pulp Using Emulsion Design Principles

Fermentation of Tomato Juice Improves in Vitro Bioaccessibility of Lycopene

Sustainable Drying and Green Deep Eutectic Extraction of Carotenoids from Tomato Pomace

Studies on Refining of Lycopene Oleoresin by Ultrasound-assisted Saponification

Extraction of Tomato Seed Oil

Optimization of Extraction Technology of Total Phenolic from Tomatoes