Abstract:The hygric performance of building envelopes determines the degradation progress. Multiple factors, including the climate parameters (e.g., solar radiation and wind-driven rain) and building structure (e.g., thermal bridges), significantly affect the hygrothermal conditions in building envelopes. Inappropriate thermal insulation measures may exacerbate the humidity within the building envelope and further induce condensation and mould growth, which threatens the building structural safety and indoor air quality. However, the key facilitators of moisture accumulation in building envelopes are yet to be fully determined. Herein, a well-validated coupled heat and moisture transfer (HAMT) model was adopted to investigate moisture accumulation in building envelopes. The target building was located in a Chinese city (Hangzhou) where the climate is characterized as a hot and humid summer and a cold winter. The results demonstrate that the moisture content as well as condensation and mould risk is closely related to the building wall orientation. High heat flux at the exterior surface can reduce the overall moisture content of the building envelope. Conversely, it could facilitate moisture accumulation when the building envelope is exteriorly isolated by a layer of thermal insulation material (e.g., expanded polystyrene). Subsequently, the insulation layer could increase condensation risk. Three prone periods for condensation as well as spore germination and mould growth in a year were detected, indicating that the conditions that are tendentious for the above risks are the same. The adoption of an external insulation layer could prevent mould from growing inward while increasing the condensation risk. (c) 2022 Elsevier B.V. All rights reserved.

Heat and Moisture Transfer Characteristics of Two Common Walls

Heat and Moisture Transfer in Wall-to-floor Thermal Bridges and Its Influence on Thermal Performance

The Moisture Distribution in Wall-to-floor Thermal Bridges and Its Influence on Mould Growth

Facilitator of moisture accumulation in building envelopes and its influences on condensation and mould growth

Optimum Insulation Thickness of External Walls by Integrating Indoor Moisture Buffering Effect: a Case Study in the Hot-Summer-cold-winter Zone of China

The Rising Damp in Two Traditional Clay-Brick Masonry Walls and Influence on Heat Transfer Performance

Coupled Heat and Moisture Transfer in Walls Featuring Moisture-Buffering Materials and Ventilating Layers: an Experimental Study

Moisture Distribution in Wall-to-floor Thermal Bridges under the Analysis of Coupled Heat and Moisture Transfer

Moisture transfer characteristics of the wall with phase change material

Establishment of Equivalent Coupled Diffusion Model for the Transfer of Heat and Mass in the Building Walls

Theoretical Analysis Based on Experimental Studies of Heat and Moisture Fluxes Penetrating Through a Masonry Wall Above Ground Level in an Annual Cycle

Analysis on Moisture Transfer for Two Light Steel- Framed Composite Walls

The Comparative Analysis on the Heat Insulation Performance of Several Building Exterior Walls

Study of heat and moisture transfer in internal and external wall insulation configurations

Simulation Research on the Condensation Characteristics of Thermal Insulation Walls with a Vapour Barrier

Study on moisture transfer in porous building components and indoor environment

Numerical Simulation of Heat, Air, and Moisture Transfer Through a Wall of Porous Media

Experimental Study on Heat Transfer Through Wall Subjected to Rain in Guangzhou

Heat Transfer Characteristics of a Composite Radiant Wall under Cooling/heating Conditions

Simulation of phase change heat transfer in porous foam building walls

Applicability of vapor transport theory for common wall types in mixed climate zone of China