Abstract:There are three difficulties in the topology optimization problem of continuum structure:1) The problem under multiple load case is not easy to be approached than that under single load case, because the former becomes a multiple objective problem on the basis of compliance objective function. 2) The problem with local constraints, such as elemental stress limit, is not easy to be solved than that with global constraints, such as displacement or frequency limits, because sensitivity analysis of the former has too expensive computation. 3) The problem with a phenomenon of ill-conditioned load, which is similar to ill-conditioned stiffness matrix in the structural analysis, is not easy to get reasonable final topological structure, because the former is difficult to consider different influences between the loads with small forces and the loads with big forces, and some of topology paths of transferring small forces may disappear during the process of iteration. To overcome the above difficulties, some measures are adopted as follows:1) Topology optimization model is established by independent continuous mapping (ICM) method. 2) Based on the von Mises criteria in theory of elastic failure, all element’ s stress constraints are transformed into a structural energy constraint, namely, a global constraint substitutes for lots of local constraints. 3) The phenomenon of the ill-conditioned load is divided into three cases: (a) Ill-condition exists between load cases, but not within each load case; (b) Ill-condition exists within some load case; (c) Ill-condition exists not only between load cases, but also within some load case. (4) A strategy based on strain energy is proposed to adopt ICM method with stress globalization, and the problems of the three cases of ill-conditioned load mentioned above are solved in term of different complementary approaches one by one. Numerical examples show that the topology path of transferring forces can be obtained more easily by substituting global strain energy constraints for local stresses constraints, and the problem of ill-conditioned load can be solved well by the weighting method which takes structural energy as weighting coefficient.

TOPOLOGY OPTIMIZATION FOR PLATE AND SHELL STRCTURES BASED ON STRESS CONSTRAINT GLOBALIZATION

TOPOLOGICAL OPTIMIZATION OF CONTINUUM STRUCTURE UNDER THE STRATEGY OF GLOBALIZATION OF STRESS CONSTRAINTS

Topology Optimization of Tensegrity Structures Considering Buckling Constraints

TOPOLOGY OPTIMIZATION OF CONTINUUM STRUCTURE WITH GLOBALIZATION OF STRESS CONSTRAINTS BY ICM METHOD

Isogeometric Analysis-Based Design of Post-Tensioned Concrete Beam Towards Construction-Oriented Topology Optimization

Isogeometric Topology Optimization (ITO) of Fiber Reinforced Composite Structures Considering Stress Constraint and Load Uncertainties

Topology Optimization of Continuum Structure With Globalization of Stress Constraints

Topology optimization of multi-material structures considering a piecewise interface stress constraint

Toward static and transient stress-constrained topology optimization for shell-infill structures

Comprehensive multi-material topology optimization for stress-driven design with refined volume constraint subjected to harmonic force excitation

THE ICM METHOD FOR CONTINUUM STRUCTURAL TOPOLOGY OPTIMIZATION WITH CONDENSATION OF STRESS CONSTRAINTS

Topology optimization for minimum stress design with embedded movable holes

Stress-related Topology Optimization of Shell Structures Using IGA/TSA-based Moving Morphable Void (MMV) Approach

Stress-based evolutionary topology optimization via XIGA with explicit geometric boundaries

Density-based isogeometric topology optimization of shell structures

Design of the multiphase material structures with mass, stiffness, stress, and dynamic criteria via a modified ordered SIMP topology optimization

LOAD SICKNESS TREATMENT IN TOPOLOGY OPTIMIZATION OF CONTINUUM STRUCTURE BY ICM METHOD WITH STRESS GLOBALIZATION

Stress‐related topology optimization for castable design

A single variable stress-based multi-material topology optimization method with three-dimensional unstructured meshes

Structural topology optimization considering both performance and manufacturability: strength, stiffness, and connectivity