Abstract:At present, the wind tunnel experiment is more and more widely used, but it is rarely used in the construction industry. Therefore, this thesis is to study the wind load of prefabricated buildings by numerical simulation. First, the application field of wind load numerical simulation is analyzed. Next, the numerical model is used to simulate the average wind pressure distribution on the building surface of single tower, tower G and tower F. The turbulence model is established based on fluid mechanics, which makes the obtained data more accurate and can converge quickly. Finally, the wind load interference effects of two fabricated towers and a single tower are analyzed. The experimental results show that the moment coefficient interference factor of tower F remains between 0.696~1.125 and that of tower G remains between 0.291~1.043. When the wind direction angle is 90°, the maximum values of the building base torque and the base bending moment around the X axis appear simultaneously, and the moment around the Y axis is not 0, which will change the stress of the building on the base. If the wind direction angle becomes 0°, the two fabricated towers will interact to reduce the impact on the base moment of the upstream building. Meanwhile, the wind pressure interference factor on the wall surface of prefabricated buildings remains between [-1, 1.5]. When the buildings in the upstream are blocked, the wind pressure interference factor may become 0. However, the shape coefficient of negative pressure on the inner wall of the building will increase rapidly due to the narrow channel effect. This thesis will analyze the wind load on the surface of prefabricated buildings through numerical simulation, which will help the wind engineering team build safer prefabricated buildings.

Design-oriented Wind Tunnel Experiments for House Buildings

NUMERICAL WIND TUNNEL TECHNIQUE FOR THE WIND RESISTANCE ANALYSIS OF LONG SPAN SPATIAL STRUCTURES

Wind Tunnel Experimental Study of Wind Pressure Distribution on Tall Buildings Considering Surrounding Interference

NUMERICAL SIMULATION AND ANALYSIS OF WIND ENVIRONMENT AROUND BUILDING COMPLEX

Wind Tunnel Test for the Wind Pressure Distribution on Hangzhou Huanglong Tennis Gymnasium

Wind tunnel test and numerical simulation of wind-induced static pressure field around a building

Study on wind-induced dynamic responses and wind tunnel test for a large-span double-layered roof structure

Field Measurement of Wind Pressure on a Large-Scale Spatial Structure and Comparison with Wind Tunnel Test Results

Analysis of Wind Vibration Characteristics of a Narrow-shaped Steel Residential High-rise Building

NUMERICAL SIMULATION OF WIND LOADS AND WIND FLOW FIELD AROUND A SPHERICAL TALL BUILDING

Wind Tunnel Experiment and Optimization Design of Wind Environment Around Buildings with Parallel Layout

Experimental Technology on Dynamic Wind Loads on a Tall Building

Experimental investigation of Xiao Shan International Trade Centre in wind tunnel

Wind Tunnel Test Study on Rigid Model of a Super High-Rise Building

Wind tunnel study on internal wind effect for structure with openings

Structural Response Analysis and Comfort Evaluation of Residential Buildings: A Combined Wind Tunnel and FEM Approach

Discussion of design method for wind tunnel test model of long-span roof structures

Research on Interference of Wind Load on Complicated-Structured Buildings

Wind Tunnel Test for the Wind Pressure Distribution on the Hangzhou Grand Theater Building

Wind tunnel test on the Handan Culture & Art Center

Numerical Simulation of Wind Load on Prefabricated Buildings Using Computational Fluid Dynamics