Abstract:A laboratory membrane bioreactor (MBR) using a submerged polyethylene hollow-fibre membrane module with a pore size of 0.4μm and a total surface area of 0.2m2 was used for treating a raw water supply slightly polluted by domestic sewage. The feeding influent had a total organic carbon (TOC) level of 3–5mg/L and an ammonia nitrogen (NH3-N) concentration of 3–4mg/L. The MBR ran continuously for more than 500 days, with a hydraulic retention time (HRT) as short as 1h or less. Sufficient organic degradation and complete nitrification were achieved in the MBR effluent, which normally had a TOC of less than 2mg/L and a NH3-N of lower than 0.2mg/L. The process was also highly effective for eliminating conventional water impurities, as demonstrated by decreases in turbidity from 4.50±1.11 to 0.08±0.03 NTU, in total coliforms from 105/mL to less than 5/mL and in UV254 absorbance from 0.098±0.019 to 0.036±0.007cm−1. With the MBR treatment, the 3-day trihalomethane formation potential (THMFP) was significantly reduced from 239.5±43.8 to 60.4±23.1μg/L. The initial chlorine demand for disinfection decreased from 22.3±5.1 to 0.5±0.1mg/L. The biostability of the effluent improved considerably as the assimilable organic carbon (AOC) decreased from 134.5±52.7 to 25.3±19.9μg/L. All of these water quality parameters show the superior quality of the MBR-treated water, which was comparable to or even better than the local tap water. Molecular size distribution analysis and the hydrophobic characterisation of the MBR effluent, in comparison to the filtered liquor from the bioreactor, suggest that the MBR had an enhanced filtration mechanism. A sludge layer on the membrane surface could have functioned as an additional barrier to the passage of typical THM precursors, such as large organic molecules and hydrophobic compounds. These results indicate that the MBR with a short HRT could be developed as an effective biological water treatment process to address the urgent need of many developing countries that are plagued by the serious contamination of surface water resources.

New Membrane Bioreactor with Gravity Outflow for Treatment of Domestic Sewage and Woolen Mill Wastewater

Study on Polypropylene Hollow Fiber Based Recirculated Membrane Bioreactor for Treatment of Municipal Wastewater

Dyeing and Printing Wastewater Treatment Using a Membrane Bioreactor with a Gravity Drain

Nonwovens-bioreactor with Gravity Outflow for Treating Municipal Wastewater

Treatment of Restaurant Wastewater in MBR at Different Membrane Fluxes

An A/O submerged membrane bioreactor and its membrane fouling research in treating bathing wastewater

[Permeate Flux and Membrane Fouling Controlling of a Membrane Bioreactor with Gravity Flow to Treat Domestic Sewage and Landfill Leachate].

A Pilot Scale Anoxic/oxic Membrane Bioreactor (A/O MBR) for Woolen Mill Dyeing Wastewater Treatment.

PRESENT STATUS OF PROCESSING CONDITIONS OF MEMBRANE BIOREACTOR IN DYEING WASTEWATER TREATMENT

Production of Reclaimed Water by Membrane Bioreactor with Gravity Flow

[Printing and Dyeing Wastewater Treatment Using Combined Process of Anaerobic Bioreactor and MBR].

Enhanced Mbr by Internal Micro-Electrolysis for Degradation of Anthraquinone Dye Wastewater

Anoxic/aerobic granular active carbon assisted MBR integrated with nanofiltration and reverse osmosis for advanced treatment of municipal landfill leachate

Wastewater Treatment by Integrated Plate Membrane Bioreactor

Study on the Factors Influencing Treatment Effect and Membrane Flux of Anaerobic/Oxic Membrane Reactor (A/O MBR)

Membrane bioreactor for the drinking water treatment of polluted surface water supplies.

Treatment of dying wastewater from a woolen mill with a pilot-scale anaerobic/oxic membrane bioreactor (A/O MBR)]

Treatment of Municipal Wastewater by Membrane Bioreactor: A Pilot Study

Domestic wastewater treatment and membrane fouling control by an innovative MBR system combined with adsorption and rough-sedimentation

Domestic Wastewater Treatment by Submerged Flat MBR System

Domestic Wastewater Treatment by Flexible Flat Sheet MBR