Abstract:Volumetric error is a primary factor that affects the accuracy of machining tools. The ability to ascertain volumetric error in a rapid and simple manner is of significant importance, and this can remarkably reduce the probability of temperature variation during the experiment. This study proposes a strategy for volumetric error measurement and compensation based on laser tracer for the 3-axis numerical control (NC) machining tool, and verifies the machining accuracy of a concave semi-spheroid test piece. In this study, the calibration methods employed by the laser tracer and the error separation algorithm of the machining tool are initially investigated. Following this, the accuracy of the geometric error measurement is verified using the laser interferometer. The cubic spline interpolation method is then employed to establish the tool path volumetric error model in the 3-axis NC machining tool, and the G-code modification is conducted for volumetric error compensation. Experiment results show that when the error compensation is performed, the improvement in the accuracy as compared with the initial state exceeds 50% not involving machining. To evaluate the accuracy and effectiveness of the proposed method, two machining tests to obtain a concave semi-spheroid test piece with and without volumetric error compensation strategy are studied, and the corresponding accuracies are measured by a high precision coordinate–measuring machine. It is found that the machining accuracy after having performed the error compensation is approximately 43% higher than that obtained on the pre-volumetric error compensation.

The Technical Research of Three-Dimension Tool Compensation for Glass Carve

Development of CAD/CAM system for the CNC irregular glass grind

The study of CAD/CAM system of super CNC glass carve center

Synchronous control way and realization of glass carve machine center

Numerical Solution of Simultaneous Equations Based Geometric Error Compensation for CNC Machine Tools with Workpiece Model Reconstruction

Research on 3D Cutter Radius Compensation for 5-Axis Flank Milling

Research of Algorithm of Cutting Tool Radius Compensation in Five-axis CNC and Simulation of Numerical Control

Research and application on the CNC form grinding process of touch screen glass

Study of Software and Hardware in Computer Numerical Control Engrave System

Research and Application of Foundry CAD/CAE System

Design and Realization of the Mark Point Visual Positioning System on the CNC Glass Carving Machine

Volumetric Error Compensation of Machine Tool Using Laser Tracer and Machining Verification

Study on Cutter Radius Compensation Methods for 5-Axis Cnc Machining

Tool Deflection Error Compensation in Five-Axis Ball-End Milling of Sculptured Surface

The Application and Research on CNC Laser Engraving for Glass

High efficiency fabrication of 3D curved glass by full-motor-driving precision molding

Compensate Technique for Tool Path Error of Processing CNG Bottle's Bottom Based on Image Feedback

Research on geometric error compensation of ultra-precision turning-milling machine tool based on macro–micro composite technology

Research on Real Time Compensation Method Based on Time Series Predictive Technology for Contour Error of CNC Machine Tool

A Tool Path Pre-compensation Method for 3-axis Machining Using Contour Error Model

The Design of a Dental Grinding 3-Axes CNC System