Abstract:To effectively solve the problem of wastewater pollution, in this paper, corn starch, 3-chloro-2-hydroxypropyl trimethylammonium chloride (CTA), vinyl acetate (VAC), and methylacryloxyethyltrimethylammonium chloride (DMC) were used as raw material, etherifying agent, esterifying agent, and grafting monomer, respectively. A starch (St)-based natural polymer cationic flocculant (DMSt-g-DMC) was prepared via etherification, esterification, and grafting copolymerization triple modification. This study is of great significance for the removal of dyes from wastewater. There are two keys to success. First, DMSt-g-DMC not only enhances flocculation but also improves water solubility through triple modification. Second is grafting reaction, in which the number of positive charges in the main chain of the DMSt-g-DMC macromolecule is further increased and its molecular structure adjusted to give full play to its electrical neutralization, bridging, and net trapping effects on anionic dyes in the water, so as to achieve the purpose of improving the flocculation effect. The removal rates of DMSt-g-DMC were 94.1% for Acid Light Yellow G, 83.7% for Reactive Brilliant Blue X-BR, and 97.1% for Direct Lake Blue 5B. DMSt-g-DMC not only has a wide flocculation window but also maintains good flocculation performance in a wide pH range, which is conducive to the treatment of wastewater with high alkalinity and complex composition. Finally, the removal rate of dye was tested when DMSt-g-DMC and PAC were flocculated together; the dosages of DMSt-g-DMC and PAC were 70 and 100 mg/L, respectively. The removal rates of Disperse Red GS, Disperse Yellow 2G-FL, and Direct Lake Blue 5B reached 87.5, 89.8, and 95.6%, respectively. In addition, DMSt-g-DMC and PAC remained stable after a long flocculation time, which may bring far-reaching changes if applied in industrial wastewater treatment.

Graft Modification of Calcium Lignosulfonate and Its Application in the Treatment of Base Dyeing Effluent

Study on the preparation of amploteric lignin-based flocculant and its flocculation and decolorizing properties

Preparation of an Amphoteric Lignin Flocculant and Its Decolorization Performance Research

Performance of Water Absorption and Retention Material and Chemical Synthesis of Calcium Lignin Sulphonate with Acrylamide and Acrylic Acid

Study on the coagulation treatment of activated dye wastewater

Study on the Discoloration of Simulating Dye Effluemts with a Kind of Amphoteric Lignin-based Flocculant

Synthesis and Application of Poly (Acrylamide and Polyethylene Glycol Methacrylate) Flocculant

Preparation of Amphoteric Lignin-base Flocculant LSDC

Evaluation of a novel dextran-based flocculant on treatment of dye wastewater: Effect of kaolin particles

Anion Exchange Fiber Containing Alkalescence for Treatment of Printing and Dyeing Wastewater

Treatment of Dyes Wastewater from Production by Modified Humic acid Absorbent

Polyacrylamide Grafted Cellulose As an Eco-Friendly Flocculant: Efficient Removal of Organic Dye from Aqueous Solution

The synthesis and absorption dynamics of a lignin-based hydrogel for remediation of cationic dye-contaminated effluent

Synthesis of polyamine flocculants and their potential use in treating dye wastewater

Effects of Papermaking Sludge-Based Polymer on Coagulation Behavior in the Disperse and Reactive Dyes Wastewater Treatment

Research on Synthesis of a New Cationic Decolorizing Flocculant and Its Decolorization Performance

Study on copper-containing wastewater treatment by acrylamide modification lignosulfonate

Enhanced performance of a novel flocculant containing rich fluorine groups in refractory dyeing wastewater treatment: Removal mechanisms

Experimental Study on Treatment of Dyeing Wastewater by Activated Carbon Adsorption, Coagulation and Fenton Oxidation

Graft Modification of Lignin with Acrylamide

Preparation of Starch-Based Cationic Flocculants and Its Study on the Removal of Textile Dyes