Abstract:Understanding the coupled mechanisms between two-phase flow and reactive transport in proton exchange membrane fuel cells is important for improving cell performance. In this study, a one-dimensional + three-dimensional model is developed to simulate the air-water two-phase flow, mass transport and electrochemical reaction in the cathode side of proton exchange membrane fuel cells. Dynamic water behaviors affected by several forces in three channels are well captured by the volume of fluid method. Effects of liquid water behaviors on pressure drop, mass flow rate, oxygen concentration distribution, current density and especially the distribution characteristics among different channels are discussed. It is found that the current density increases under certain flow patterns such as droplet detachment and water film on the top wall. Compared with single-phase flow, the two-phase flow magnifies the flow maldistribution in different channels, and such maldistribution in turn leads to different water detachment sequence in the three channels. The change of the mass flow rate in the second channel is more sensitive to that in the third channel. Effects of the gas channel wall wettability and channel structures are also investigated. The results show that changing the gas channel as hydrophobic will lead to higher pressure drop, lower current density and poorer flow distribution among different channels, which thus is not desirable in application. Modified structures of rectangle channel and tapered channel are finally explored. Compared with the base case, the tapered channel results in increased flow uniformity and averaged current density by 65.9% and 1.5%, respectively.

Study on Local Current Distribution in Proton Exchange Membrane Fuel Cell

Localized Electrochemical Impedance Measurements on Nafion Membranes: Observation and Analysis of Spatially Diverse Proton Transport Using Atomic Force Microscopy.

Experimental Investigation on Local Behaviors of PEMFC with Segmented Cell

Simultaneous Measurement of Current and Temperature Distributions in a Proton Exchange Membrane Fuel Cell

Synchronous Measurement of Temperature and Current Density Distribution of PEMFC

Study of Internal Multi-Parameter Distributions of Proton Exchange Membrane Fuel Cell with Segmented Cell Device and Coupled Three-Dimensional Model

In-situ Measurement of Temperature and Humidity Distribution in Gas Channels for Commercial-Size Proton Exchange Membrane Fuel Cells

Current density and temperature distribution measurement and homogeneity analysis for a large-area proton exchange membrane fuel cell

Experiment study on the current density distribution of PEMFC

Study of a PEMFC performance based on a novel current distribution measurement method

Effects of Humidification Temperatures on Local Current Characteristics in a PEM Fuel Cell

Modeling of water and temperature distribution in PEM fuel cell

Numerical study of the effect of relative humidity and stoichiometric flow ratio on PEM (proton exchange membrane) fuel cell performance with various channel lengths: An anode partial flooding modelling

Simultaneous measurement of local current and temperature distributions in proton exchange membrane fuel cells with dead-ended anode

Comparison of Current Distributions in Proton Exchange Membrane Fuel Cells with Interdigitated and Serpentine Flow Fields

Cfd Based Two-Phase Modelling of Proton Exchange Membrane Fuel Cell with Interdigitated Flow Field

Numerically Investigating Two-Phase Reactive Transport in Multiple Gas Channels of Proton Exchange Membrane Fuel Cells

A Study of Dynamic Characteristics of PEM Fuel Cells by Measuring Local Currents

Experimental investigation of operating characteristics of proton exchange membrane fuel cell with different anode strategies based on the segmented cell

Current Density Distribution in Pefc

In situ investigation of heat and water distributions in the PEM fuel cell