Abstract:Using 20L explosion vessel, the present research work reports some experimental results which elucidate the effects of dust concentration, particle size and specific surface areas on aluminum dust explosion severity. Dust flame propagation property and explosion products were analyzed systemically. Six kinds of aluminum powders with different size distributions were selected and specially prepared for explosion tests. Results show that explosion parameters present an increasing and then decreasing trend with dust concentrations. The optimum explosion concentrations for all the selected aluminum dusts are similarly equal to 500g/m3. Maximum explosion pressures would be quadratic correlated with the decreasing of particle size. However, (dP/dt)max would be exponentially increasing with particle size decreasing. Aluminum dust flame propagation speed would be increased and the combustion mechanism would be transited from diffusion-controlled mode to kinetically controlled mode with particles diameter decreasing. For the finer dust cloud (dS less than 10μm), dust flame propagation speed would be exponential increased with dust concentration. However, there is a power function relation between flame propagation speeds and dust concentration for the coarse aluminum dust cloud (dS larger than 10μm). At the experimental condition, flame propagation speed presents an exponentially decreased trend with the increasing of particle size. Explosion products obtained at different conditions present different apparent morphology. The higher explosion pressure, the finer explosion fragments and nano-scale spherical structure would be produced. For coarse aluminum particles, explosion products present fluffy flocculent structure. Furthermore, alumina produced under lower explosion pressure conditions are mainly γ-Al2O3 components. Under high explosion pressure condition (such as 0.56MPa), there are notable bulges corresponding to α-Al2O3 are produced. Present research results may have important significance for understanding the explosion mechanism of aluminum-air dust/air cloud.

Influence of Aluminum Shape and Size on Sensitivity of Pyrotechnic Flash Composition

A STUDY ON SENSITIVITY OF PYROTECHNIC FLASH COMPOSITION

Ignition sensitivity and explosion behaviors of micron-sized aluminum powder: Comparison between flake aluminum powder and spherical aluminum powder

Explosion severity of micro-sized aluminum dust and its flame propagation properties in 20 L spherical vessel

Effects of Aluminum Particle Size on the Detonation Pressure of TNT/Al

The effects of aluminum size on the combustion characteristics of high energy propellants with higher burning rate

Exploring the Combustion Mechanism of Single Micron-Sized Aluminum Particles with a Numerical Model

Effects of Nano Aluminum Powder on the Mechanical Sensitivity of RDX-Based Explosives

On weak influence of aluminum powder size on its post-detonation reaction in different time scales

Influence of Particle Size of Aluminum Powder and Morphology of Oxidizer in Rdx Based Aluminized Explosive on the Ability of Accelerating Metal (I)

The influence of aluminum particle size and oxidizer morphology in RDX-based aluminized explosives on their ability to accelerate metals

Explosion suppression flame and mechanism of energetic dust with distinct morphologies: Aluminum-containing metal as a typical

Study on transient reaction mechanism and explosion intensity parameters of micron-sized flake aluminum dust in air

Study on the Transformation of Combustion Mechanism and Ejection Phenomenon of Aluminum Particles in Methane Flame

Effects of Al Particle Size on the Impact Energy Release of Al-Rich PTFE/Al Composites under Different Strain Rates

Influence of the Hierarchy Structure of Aluminum Particles on Density, Combustion Efficiency, and Ignition Delay

Study on Preparation, Application and Modification of Flake Aluminium Powder

Experimental Study on Dynamic Combustion Characteristics of Aluminum Particles

Research on Composite Explosive with Nano-Aluminium

Explosion Temperature and Dispersion Characteristics of Composite Charges Based on Different Non-detonative Materials

Specimen size effect of explosive sensitivity under low velocity impact