Abstract:This paper presents the closed-loop control of a single-switch high-gain multicell boost DC-DC converter working in a continuous conduction mode (CCM). This converter is particularly designed for applications in photovoltaic systems. One of the main advantages of the proposed converter is that it only employs one active semiconductor switch, which decreases the converter losses and cost, increases the efficiency, and simplifies the control circuit. Moreover, the multicell nature of the proposed converter offers the possibility of obtaining the required voltage gain by selecting the number of cells. State space average (SSA) modeling and small-signal analysis are used to model the switching converter power stages of the proposed converter. The parasitic series resistances of the passive elements of the converter circuit are considered to improve the accuracy of the modeling. Small-signal analysis is used to derive the open-loop transfer functions, input-to-output and control-to-output transfer functions of the proposed converter to examine its dynamic performance. The stability of the converter is analyzed to design the parameters of the voltage controller using the proposed modeling method. The experimental prototype of the proposed single-switch two-cell boost DC-DC converter was implemented. The simulation and experimental results proved the effectiveness of the proposed boost DC-DC converter under different working conditions. It has a fast dynamic response without overshoots. A comprehensive comparison between the proposed converter and previous boost converters is provided. It guarantees a required variable and constant high voltage gain with a wider duty ratio range. It compromises between the required performance, the low number of components, low voltage stress on the components, and cost-effectiveness. The experimental efficiency of the proposed converter is about 96% at a 100 W load.

Analysis of Non-Ideal Boost Switching Converter in CCM Operation

Nonlinear Models and Simulation of Boost Converters Operating in CCM

Modeling and Control for DC-DC Converters Based on Hybrid System

Modeling and Parameter Identification of DC/DC Converters in Both CCM and DCM Mode

Evaluation of Power Losses in Different CCM Mode Single-Phase Boost PFC Converters Via a Simulation Tool

Analysis of a Coupled Inductor Boost Three-Port Converter with High Voltage Gain for Renewable Energy Systems

Analysis and Design-Optimization of LCC Resonant Converter Operating under Wide Range Input and Output Voltage

Multiscale Modeling and Analysis of Boost Converter Based on Device Mechanism Model and Continuous Switching Function

Analysis and Average Modeling of Critical Mode Boost PFC Converter

Small Signal Modeling And Analysis Of Interleaved Active-Clamp Forward Converter With Parallel Input And Series-Parallel Output

Control-to-output Transfer Function of the Open-loop Step-up Converter in CCM Operation

Fractional Order Buck–Boost Converter in CCM: Modelling, Analysis and Simulations

The Unified Model and Optimal Operation Analysis for A Modular Multilevel Converter

Dynamic Phasor Model of Line Commutated Converter Under Unbalanced Conditions

A Switching Control Algorithm of Boost Converter Based on Hybrid System

Modeling and analysis of the hybrid buck-boost converter with switched inductor structure

State Space Average Modeling, Small Signal Analysis, and Control Implementation of an Efficient Single-Switch High-Gain Multicell Boost DC-DC Converter with Low Voltage Stress

Steady-State Performance Anallysis Of Cascade Boost Converters

Average and Small Signal Modeling of Negative-Output Ky Boost Converter in Ccm Operation

Improved Small Signal Modeling and Dynamic Analysis of High Step-Up Converter with Charged Pump and Boost Converter

Nonlinear Analysis and Control of Interleaved Boost Converter Using Real-Time Cycle to Cycle Variable Slope Compensation