Abstract:Consideration of a core and mantle configuration for individual grains is a prominent method to capture the grain size-dependence in the constitutive models for polycrystal material. The mantle represents a region of the grain volume near the grain boundary where mechanical deformation is influenced by the grain boundaries, while the core represents the inner region of the grain volume. The grain size-dependence is then realized by assigning a set of values for the mechanical properties in the mantle that are different from those of the core region. However, these values for the mechanical properties of the mantle region are typically chosen arbitrarily, guided solely by the quality of the agreement between a model's predicted stress-strain behavior with that obtained experimentally. In the present study, a physics-based method to develop the grain size-dependent crystal plasticity constitutive model on the core and mantle configuration for polycrystal materials is presented. The method is based on the assumption that any resistance to dislocation nucleation and motion in a material manifests as an increase in yield strength and a decrease in strain-hardening modulus, and the mutual relationship between yield strength and strain-hardening is an inherent material property that determines the plasticity of that specific material. Accordingly, the same single crystal plasticity constitutive model that describes the behavior of the material under loading can be used to capture the increased resistance to dislocation nucleation and motion in the grain boundary influence region. The physics-based modeling is facilitated by introducing a shear flow strain distribution in the phenomenological formulation and a pile-up of dislocation density distribution in the dislocation based formulation, such that, the resulting variations in the yield strength and the strain-hardening modulus are identical to that produced by the increased resistance in the grain boundary influence region. Thus, the increase in strength and the decrease in the strain-hardening modulus, determined as spatially varying local material properties in the mantle, are mutually related through the grain size-independent inherent plastic properties specific to the material. A simplified model that considers the grain boundary effect averaged over the grain volume is also developed under this general framework. Implementation of this simplified model is demonstrated by considering the case of a power law flow rule and a hyperbolic-secant hardening rule for the phenomenological formulation, and Taylor strength relation for the dislocation based formulation. Finally, the grain size-dependent constitutive model is validated by comparing the predicted stress-strain behavior of polycrystal copper samples under uniaxial loading with experimental results.

A Multiscale Gradient-Dependent Plasticity Model for Size Effects

Stress/strain Gradient Plasticity Model for Size Effects in Heterogeneous Nano-Microstructures

A dislocation-based model for deformation and size effect in multi-phase steels

A Dislocation-Based Stress-Strain Gradient Plasticity Model for Strength and Ductility in Materials with Gradient Microstructures

Analysis of Size Effects Based on A Symmetric Lower-Order Gradient Plasticity Model

Modeling yield stress scaling and cyclic response using a size-dependent theory with two plasticity rate fields

Lower-order Mechanism-Based Strain Gradient Plastic Model Considering Stress Gradient Effect

Unravelling the physics of size-dependent dislocation-mediated plasticity

Grain size-dependent crystal plasticity constitutive model for polycrystal materials

Micromorphic Modelling of Grain Size Effects in Metal Polycrystals

Strain Gradient Crystal Plasticity Modelling of Size Effects in a Hierarchical Martensitic Steel Using the Voronoi Tessellation Method

Prediction of grain refinement using multiscale crystal plasticity-integrated dislocation density-based model in multiphase steel alloys

A Conventional Theory of Strain Gradient Crystal Plasticity Based on the Taylor Dislocation Model

Modeling of the Plastic Deformation of Nanostructured Materials with Grain Size Gradient

Generalised Continuum Modelling of Grain Size Effects in Polycrystals

Plasticity in Materials with Heterogeneous Microstructures

Unified Model for Size-Dependent to Size-Independent Transition in Yield Strength of Crystalline Metallic Materials.

Development of the Concurrent Multiscale Discrete-Continuum Model and Its Application in Plasticity Size Effect

Size Effects in Generalised Continuum Crystal Plasticity for Two-Phase Laminates

A Predictive Discrete-Continuum Multiscale Model of Plasticity With Quantified Uncertainty

A stochastic crystal plasticity model with size-dependent and intermittent strain bursts characteristics at micron scale