Abstract:In shield tunneling, the joint is one of the most vulnerable parts of the segmental lining. Opening of the joint reduces the overall stiffness of the ring, leading to structural damage and issues such as water leakage. Currently, the Winkler method is commonly used to calculate structural deformation, simplifying the interaction between segments and soil as radial and tangential Winkler springs. However, when introducing connection springs or reduction factors to simulate the joint stiffness of segments, the challenge lies in determining the reduction coefficient and the stiffness of the springs. Currently, the hyperstatic reflection method cannot simulate the discontinuity effect at the connection of the tunnel segments, while the state space method overlooks the nonlinear interaction between the tunnel and the soil. Therefore, this paper proposes a numerical simulation method considering the interaction between the tunnel and the soil, which is subjected to compression rather than tension, and the discontinuity of the joints between the segments. The model structure and external load are symmetrical, resulting in symmetrical calculation results. This method is based on the soft soil layers and shield tunnel structures of the Shanghai Metro, and the applicability of the model is verified through deformation calculations using three-dimensional laser scanning point clouds of sections from the Shanghai Metro Line 5. When the subgrade reaction coefficient is 5000 kN/m3, the model can effectively simulate the deformation of operational tunnels. By adjusting the bending stiffness of individual connection springs, we investigate the influence of bending stiffness reduction on the bending moment, radial displacement, and rotational displacement of the ring. The results indicate that a decrease in joint bending stiffness significantly affects the mechanical response of the ring, and the extent and degree of this influence are correlated with the joint position and the magnitude of joint bending stiffness.

Numerical Simulation of Soft Longitudinal Joints in Concrete-Faced Rockfill Dam

Numerical Evaluation of Soft Inter‐slab Joint in Concrete‐faced Rockfill Dam with Dual Mortar Finite Element Method

Three‐dimensional Numerical Analysis of Concrete‐faced Rockfill Dam Using Dual‐mortar Finite Element Method with Mixed Tangential Contact Constraints

Numerical modeling of soil–structure interface of a concrete-faced rockfill dam

Time-dependent Deformation in High Concrete-Faced Rockfill Dam and Separation Between Concrete Face Slab and Cushion Layer

The simulation of high compressive stress and extrusion phenomenon for concrete face slabs in CFRDs under strong seismic loads

Construction of Concrete-Faced Rockfill Dams with Weak Rocks

Seismic Response Analysis of Concrete-Faced Rockfill Dams with Dual Mortar Contact Method

Mechanisms and simulation methods for extrusion damage of concrete faces of high concrete-faced rockfill dams

Stress-deformation analysis of a concrete-faced rockfill dam on thick overburden layers

Comparative Study on Interface Elements, Thin-Layer Elements, and Contact Analysis Methods in the Analysis of High Concrete-Faced Rockfill Dams

Long-Term Settlement of High Concrete-Face Rockfill Dam by Field Monitoring and Numerical Simulation

Numerical Evaluation of Transient Solar Radiation Effect on Concrete-Faced Rockfill Dam with Dual Mortar Contact Method

Safety evaluation with observational data and numerical analysis of Langyashan reinforced concrete face rockfill dam

Numerical Analysis on Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns under Axial Compression

A parabolic model and an iterative algorithm for the slab-cushion interface and the application in simulating the dynamic separation between the face slabs and cushion layer

Influence on Stress and Deformation of Concrete Faced Rockfill Dam Using Extrusion-Sidewall

Influence of Creeping on Separation Between Concrete Slab and Cushion Layer in High Concrete Face Rock-Fill Dam

A dual mortar contact method for porous media and its application to clay‐core rockfill dams

Numerical Simulation Study Considering Discontinuous Longitudinal Joints in Soft Soil under Symmetric Loading

08.40: Numerical Investigation of Mechanical Properties of Multi‐planar Concrete‐filled Steel Tubular Joints