Bis(borano)hypophosphite-based Ionic Liquids As Ultrafast-Igniting Hypergolic Fuels

Wenquan Zhang,Xiujuan Qi,Shi Huang,Jianling Li,Chenglong Tang,Jinshan Li,Qinghua Zhang

DOI: https://doi.org/10.1039/c6ta02699k

IF: 11.9

2016-01-01

Journal of Materials Chemistry A

Abstract:A new family of bis(borano)hypophosphite-based ionic liquids with ultralow ignition delay times was designed and synthesized.

What problem does this paper attempt to address?

Exploiting Hydrophobic Borohydride-Rich Ionic Liquids As Faster-Igniting Rocket Fuels

Tianlin Liu,Xiujuan Qi,Shi Huang,Linhai Jiang,Jianling Li,Chenglong Tang,Qinghua Zhang

DOI: https://doi.org/10.1039/c5cc09737a

IF: 4.9

2016-01-01

Chemical Communications

Abstract:A family of hydrophobic borohydride-rich ionic liquids was developed, which exhibited the shortest ignition delay times of 1.7 milliseconds and the lowest viscosity (10 mPa s) of hypergolic ionic fluids, demonstrating their great potential as faster-igniting rocket fuels to replace toxic hydrazine derivatives in liquid bipropellant formulations.
Coulomb Explosion and Ultra-Fast Hypergolic Ignition of Borohydride-Rich Ionic Liquids with WFNA

Xinyan Weng,Chenglong Tang,Jianling Li,Qinghua Zhang,Zuohua Huang

DOI: https://doi.org/10.1016/j.combustflame.2018.05.015

IF: 4.4

2018-01-01

Combustion and Flame

Abstract:In this work, the hypergolic ignition process of 8 recently synthesized ionic liquids (I.L.s) with [BH3(CN)BH2(CN)]− anions with white fuming nitric acid is experimentally investigated by using droplet test method and long distance microscope-high speed photography techniques. Results show that the hypergolic ignition process of the present I.L.s is of a completely different three stage nature and ultra-fast hypergolic ignition is observed for this family of I.L.s (< 5 ms). Specifically, at the very first stage upon contact (within a fraction of millisecond), ‘coulomb explosion’ like behavior in terms of fast and vigorous ejection of liquid spikes that protrude from mixing layer is observed, and this phenomenon has never been reported in previous hypergolic test for I.L.s or conventional hydrazine based fuels. The ‘coulomb explosion’ delay time (CEDT) is found to be correlated with the side alkyl functional group, which indicates the I.L. structure (characterized by the side alkyl functional group and the heterocyclic core) effects on shifting the Rayleigh instability limit (Ecoulomb/2Esurface> 1). Subsequently in the second stage, liquid spikes that are ejected into the oxidizer pool during CEDT significantly increase the reactive surface area underneath the liquid surface. As a consequence, local temperature increases, gas phase intermediate product and oxidizer/fuel vapor accumulate due to the continuous liquid phase reaction underneath the surface. When the local pressure overcomes the surface tension, disintegration of the surface in terms of larger ligaments and secondary droplets ejection was observed, together with shooting out of the vapor/smoke. Finally, in the third stage when the local temperature and the vapor concentration increase sufficiently, further gas phase reaction leads to ignition. Fine and stable flame with strong bright and green luminescence continuously evolve from the initial mixing layer. Some red and dark smokes are gradually generated above the burning bright and green flame until finally the flame dies out. The ignition delay time (IDT) decreases with the increase of unsaturation index of the heterocyclic core in the cation, and also the decrease of CEDT. The enthalpy of formation of the I.L.s for different cation structures are correlated with IDT, which represents both the fuel structure chemistry and the ‘coulomb explosion’ enhances mixing effect on the overall reactivity of this diffusive system.
Borohydride Ionic Liquids as Hypergolic Fuels: A Quest for Improved Stability

deepak chand,jiaheng zhang,jeanne m shreeve

DOI: https://doi.org/10.1002/chem.201502059

2015-01-01

Chemistry - A European Journal

Abstract:Hydrazine and its derivatives are used as fuels in rocket propellant systems; however, due to high vapor pressure, toxicity, and carcinogenicity, handling of such compounds is extremely hazardous. Hypergolic ionic liquids have shown great promise to become viable replacements for hydrazines as fuels. Borohydride-containing ionic liquids have now been synthesized using a more efficient synthetic pathway that does not require liquid ammonia and halide precursors. Among the eight new compounds, 1-allyl-3-n-butyl-imidazolium borohydride (1) and 1, 3-diallylimidazolium borohydride (5) exhibit very short ignition-delay times (ID) of 8 and 3ms, respectively. The hydrolytic stability of borohydride compounds has been greatly improved by attaching long-chain alkyl substituents to the imidazole ring. 1,3-Di-(n-octyl)-imidazolium borohydride (3) is a water stable borohydride-containing ionic liquid. 1,3-Di-(n-butyl)-imidazolium borohydride (2) is a unique example of a borohydride liquid crystal. These ionic liquids have some unusual advantages, including negligible vapor pressures, good ignition delay (ID) times, and reduced synthetic and storage costs, thereby showing good application potential as environmentally friendly fuels in bipropellant formulations. In addition, they also have potential applications in the form of reducing agents and hydrogen storage materials.
Synthesis and hypergolic properties of flammable ionic liquids based on the cyano (1H-1,2,3-triazole-1-yl) dihydroborate anion.

Zhi Wang,Yunhe Jin,Wenquan Zhang,Binshen Wang,Tianlin Liu,Jiaheng Zhang,Qinghua Zhang

DOI: https://doi.org/10.1039/c9dt00958b

IF: 4

2019-01-01

Dalton Transactions

Abstract:A series of hypergolic ionic liquids (HILs) based on the cyano (1H-1,2,3-triazole-1-yl) dihydroborate anion were synthesized by introducing the {BH2-CN} moiety into the 1,2,3-triazole anion. This introduction allowed us to improve the self-ignition property and decrease the viscosity of ionic fuels. The synthesized series of HILs exhibited wide liquid operating ranges (>220 degrees C), high densities (>1 g cm(-3)), low viscosities (as low as 22.48 cP), and ignition delay (ID) times as short as 5 ms by using white fuming nitric acid (WFNA) as the oxidizer. Furthermore, these HILs can be ignited upon contact with a 90 wt% H2O2 oxidizer in the presence of iodine.
Synthesis and characterization of hypergolic salts based on bis(1H-1,2,3-triazole-1-yl) dihydroborate anion

Xue Li,Jun Wu,Tianjiao Hou,Hongping Li,Lei Wang,Jing Ding,Hui Wan,Guofeng Guan

DOI: https://doi.org/10.1016/j.molstruc.2022.132850

IF: 3.841

2022-08-01

Journal of Molecular Structure

Abstract:As a new generation of potential rocket fuel, hypergolic ionic liquids, especially boron-containing hypergolic ionic liquids, have emerged as attractive alternatives for unsymmetrical dimethylhydrazine (UDMH). Herein, a series of bis(1H-1,2,3-triazole-1-yl) dihydroborate (BTDB) hypergolic ionic liquids were successfully synthesized, which had a melting point below -60 °C, high density ranging from 1.134 g/cm3 to 1.173 g/cm3, and superior density-specific impulse from 374.2 to 386.5 s g/cm3. In particular, 1,3-diallyl-1H-imidazol-3-ium bis(1H-1,2,3-triazole-1-yl) dihydroborate owned an ignition-delay time of 36 ms and the enthalpy of formation about 1.78 kJ/g, exhibiting that it was a good potential for the rocket fuels.

chemistry, physical
Towards N-Alkylimidazole Borane-based Hypergolic Fuels

Huang Shi,Zhang Wenquan,Liu Tianlin,Wang Kangcai,Qi Xiujuan,Zhang Jiaheng,Zhang Qinghua

DOI: https://doi.org/10.1002/asia.201601194

2016-01-01

Chemistry - An Asian Journal

Abstract:Over the past few decades, toxic and highly volatile hydrazine derivatives have been the main fuel choices for liquid bipropellants, especially in traditional hypergolic rocket engines. The search for new hypergolic fuels as replacements for hydrazine derivatives is of great interest to researchers. In this study, a series of N-alkylimidazole borane compounds has been synthesized and characterized. Interestingly, these compounds display promising applications as potential hypergolic fuels owing to their excellent physiochemical properties including low melting points, high thermal stability, low viscosities, and unique hypergolic reactivity. Compared with popular hypergolic ionic liquids, the cost-effective and scaling-up advantages of these materials highlight their promising potential as high-performance fuels in liquid bipropellant formulations. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim
Experimental Observation of Hypergolic Ignition of Superbase-Derived Ionic Liquids

Jianling Li,Wei Fan,Xinyan Weng,Chenglong Tang,Xuhui Zhang,Zuohua Huang,Qinghua Zhang

DOI: https://doi.org/10.2514/1.b36441

2018-01-01

Journal of Propulsion and Power

Abstract:The hypergolic ignition behaviors of four newly synthesized ionic liquids with dicyanamide anion (ionic liquids 1 and 3) and cyanoborohydride anion (ionic liquids 2 and 4) were experimentally investigated. The results showed that successful hypergolic ignition of both group ionic liquids were achieved with white fuming nitric acid and red fuming nitric acid. Two distinct flame initiation processes illustrated by several stages were observed for each group of ionic liquids. Specifically, the ionic liquid 1 drop showed immerging, exploding, and ignition: the drop immerged and reacted with the oxidizers underneath the liquid surface, producing gas vapor and white foam like intermediates on the surface; then, the surface exploded by fast accumulation of heat and vapor underneath, followed by flame kernels formation in the adjacent gas phase. The ionic liquid 2 drop showed bouncing and igniting: it just created a crater on the oxidizer surface and then sat on the Leidenfrost vapor layer generated by impaction and reaction. Ionic liquids 3 and 4 showed a similar flame initiation process, respectively, to that of ionic liquids 1 and 2. Furthermore, the explosion delay time and ignition delay time of the four ionic liquids were recorded, both the previous and present experimental repeatabilities were analyzed, and it was shown that heat loss control was important to the experimental repeatability.
Boron based hypergolic ionic liquids: A review

Zhenyu Zhang,Zirui Zhao,Binshen Wang,Jiaheng Zhang

DOI: https://doi.org/10.1016/j.gee.2020.12.002

2021-12-01

Abstract:The advance of space technology is deeply affected by the breakthrough of high-performance fuels. Hypergolic ionic liquids (HILs) are one of the most potential fuels for bipropellant systems. However, high viscosity value and low specific impulse of traditional N-based HILs limit their application. Recently, boron-based HILs with low viscosity become the new candidates, and their derivatives are also found to promote the hypergolicity as additives in HILs. Here, the synthesis, physical chemical properties and thermal performance of boron-based HILs and HIL-additive system are reviewed.Boron-based hypergolic ionic liquids (HILs) and their derivatives are discussed herein, which is a promising family for potential bipropellant systems. Specially, physicochemical properties and ignition performance of these green fuel are highlighted.<ol class="links-for-figure"><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S2468025720302235-fx1_lrg.jpg">Download : Download high-res image (236KB)</a></li><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S2468025720302235-fx1.jpg">Download : Download full-size image</a></li></ol>

energy & fuels,engineering, chemical,green & sustainable science & technology,chemistry, physical
Hydride- and boron-free solid hypergolic H2O2-ignitophores

Jagadish Das,Daniel Shem-Tov,Shuaizhong Wang,Lei Zhang,Eli Flaxer,Shijie Zhang,Jörg Stierstorfer,Kangcai Wang,Qi-Long Yan,Roman Dobrovetsky,Michael Gozin

DOI: https://doi.org/10.1016/j.cej.2021.131806

IF: 15.1

2021-12-01

Chemical Engineering Journal

Abstract:The race and competition in aerospace technologies based on environmentally friendly green propulsion systems with green fuels and oxidizers are attracting a significant attention. Development of hybrid propulsion systems that use a hypergolic fuel and green H2O2 oxidizer, capable of deep throttling and restarting from “cold”, is a very challenging task. Here, we describe a new synthetic approach for the synthesis and characterization of conceptually new hydride- and boron-free, and air/moisture stable solid H2O2-hypergols, based on Cu and Co complexes of bis(5-tetrazolyl) amine (H2BTA) ligand. Among prepared and evaluated materials, the best performing compound [K2(H2O)2Cu(BTA)2]n (JD-4) was found to exhibit short ignition delay time of 7 ms (with H2O2, 97%), and high thermostability of 343 °C. Based on obtained ignition results, X-ray crystallography and HASEM software calculations, structure-hypergolic activity-relationship studies were conducted. We found that the electron density difference between Cu and BTA units should be in a specific range (~2) for these compounds to ignite, providing a valuable tool for further development of novel, green, solid fuels for propulsion systems.

engineering, chemical, environmental
Synthesis and Properties of Azide-Functionalized Ionic Liquids As Attractive Hypergolic Fuels.

Zhenyuan Wang,Guangxing Pan,Binshen Wang,Ling Zhang,Weiwei Zhao,Xing Ma,Jichuan Zhang,Jiaheng Zhang

DOI: https://doi.org/10.1002/asia.201900364

2019-01-01

Abstract:Hypergolic ionic liquids (ILs) have shown a great promise as viable replacements for toxic and volatile hydrazine derivatives used as propellant fuels, and hence, have attracted increasing interest over the last decade. To take advantage of the reactivity and high energy density of the azido group, a family of low-cost and easily prepared azide-functionalized cation-based ILs, including fuel-rich anions, such as nitrate, dicyanamide, and nitrocyanamide anions, were synthesized and characterized. All the dicyanamide- and nitrocyanamide-based ILs exhibited spontaneous combustion upon contact with 100 % HNO3 . The densities of these hypergolic ILs varied in the range 1.11-1.29 g cm-3 , and the density-specific impulse, predicted based on Gaussian 09 calculations, was between 289.9 and 344.9 s g cm-3 . The values of these two key physical properties are much higher than those of unsymmetrical dimethylhydrazine (UDMH). Among the studied compounds, compound IL-3b, that is, 1-(2-azidoethyl)-1-methylpyrrolidin-1-ium dicyanamide, shows excellent integrated properties including the lowest viscosity (30.9 M Pa s), wide liquid operating range (-70 to 205 °C), shortest ignition-delay time (7 ms) with 100 % HNO3 , and superior density specific impulse (302.5 s g cm-3 ), suggesting promising applications with potential as bipropellant formulations.
Front Cover: Synthesis and Properties of Azide‐Functionalized Ionic Liquids As Attractive Hypergolic Fuels (chem. Asian J. 12/2019)

Zhenyuan Wang,Guangxing Pan,Binshen Wang,Ling Zhang,Weiwei Zhao,Xing Ma,Jiaheng Zhang

DOI: https://doi.org/10.1002/asia.201900507

2019-01-01

Chemistry - An Asian Journal

Abstract:Better bang for your buck! To take advantage of the reactivity and high energy density of the azido group, a family of cost-effective and easily prepared azide-functionalized cation-based hypergolic ionic liquids was designed and synthesized from commercially available materials. These ionic liquids showed excellent properties, including low melting points, high thermal stability, low viscosities, and unique hypergolic reactivity, demonstrating their potential as alternative hypergolic fuels to toxic and volatile hydrazine derivatives. More information can be found in the Full Paper by Jichuan Zhang, Jiaheng Zhang et al. on page 2122 in Issue 12, 2019 (DOI: 10.1002/asia.201900364).
Low-Temperature Hypergolic Ignition of 1-Octene with Low Ignition Delay Time.

Haoqiang Sheng,Xiaobin Huang,Zhijia Chen,Zhengchuang Zhao,Hong Liu

DOI: https://doi.org/10.1021/acs.jpca.0c08999

2020-01-01

The Journal of Physical Chemistry A

Abstract:The attainment of the efficient ignition of traditional liquid hydrocarbons of scramjet combustors at low flight Mach numbers is a challenging task. In this study, a novel chemical strategy to improve the reliable ignition and efficient combustion of hydrocarbon fuels was proposed. A directional hydroboration reaction was used to convert hydrocarbon fuel into highly active alkylborane, thereby leading to changes in the combustion reaction pathway of hydrocarbon fuel. A directional reaction to achieve the hypergolic ignition of 1-octene was designed and developed by using Gaussian simulation. Borane dimethyl sulfide (BDMS), a high-energy additive, was allowed to react spontaneously with 1-octene to achieve the hypergolic ignition of liquid hydrocarbon fuel at -15 °C. Compared with the ignition delay time of pure 1-octene (565 °C), the ignition delay time of 1-octene/BDMS (9:1.2) decreased by 3850% at 50 °C. Fourier transform infrared spectroscopy and gas chromatography-mass spectrometry confirmed the directional reaction of the hypergolic ignition reaction pathway of 1-octene and BDMS. Moreover, optical measurements showed the development trend of hydroxyl radicals (OH·) in the lower temperature hypergolic ignition and combustion of 1-octene. Finally, this study indicates that the enhancement of the low-temperature ignition performance of 1-octene by hydroboration in the presence of BDMS is feasible and promising for jet propellant design with tremendous future applications.
The Ignition Process Measurements and Performance Evaluations for Hypergolic Ionic Liquid Fuels: [emim][dca] and [Bmim][dca]

Jianling Li,Xinyan Weng,Chenglong Tang,Qinghua Zhang,Wei Fan,Zuohua Huang

DOI: https://doi.org/10.1016/j.fuel.2017.10.091

IF: 7.4

2017-01-01

Fuel

Abstract:Bipropellant liquid rocket engines are typically fueled by hydrazines that exhibit extreme toxicity and carcinogenity. Recently hypergolic ionic liquids (HILs) have been emerging as environmentally friendly propellant that holds the potential for hydrazine replacement due to their low volatility, easy and safe storage and handling. The HIL is a novel concept both for chemistry community and for combustion community, and plenty of research waits to be initiated to promote practical propulsion application, especially for comprehensive understanding on their fundamental combustion. In this work, hypergolic ignition of two HILs (1-ethyl-3-methylimidazolium dicyanamide-([EMIm][DCA]) and 1-butyl-3-methyl-imidazolium dicyanamide ([BMIm][DCA]) were tested with three oxidizers (white fuming nitric acid (WFNA), red fuming nitric acid(RFNA), and nitrogen tetroxide). A drop test system was designed to control the collision event of a single droplet of fuel with an oxidizer pool. Two independent high speed cameras were spontaneously employed to capture the self-luminous images of the whole hypergolic ignition process as well as the initial impact process. The results showed that hypergolic ignition process of [EMIm][DCA]-WFNA is quite similar to that of monomethyl hydrazine-WFNA. Combined with thermo physical properties of HILs, hypergolic ignition process of [EMIm][DCA]-WFNA is proposed. To qualitatively demonstrate the overall hypergolic ignition and reactivity, the explosion delay time and the ignition delay times of various combinations of the fuel-oxidizer pairs were determined. The effects of the Weber number on the explosion delay time and the ignition delay time of [EMIm][DCA]-WFNA are quantitatively investigated. Hypergolicity of different propellant combinations is tested to investigate the influence of oxidizer's oxidative capacity and HILs' cation structure. Additionally, the propulsive performance of the two dicyanamide-based IL fuels was evaluated and compared with traditional hydrazine-based fuels, based on a steady rocket model under the same initial conditions. Results show that using WFNA as the oxidizer, BMIM DCA and EMIM DCA presented a comparable propulsive performance to that of UDMH.
Preparation of the 1-Methylimidazole Borane/Tetrazole System for Hypergolic Fuels

Xue Li,Jun Wu,Fan Fang,Hongping Li,Lei Wang,Hui Wan,Guofeng Guan

DOI: https://doi.org/10.3390/molecules27144466

IF: 4.6

2022-07-13

Molecules

Abstract:Based on the acid–base neutralization, the (1-methylimidazolium)(tetrazol-1-yl)borane was successfully synthesized by taking advantage of the acidity of the tetrazole and the basicity of the 1-methylimidazole borane complex. Through HRMS, NMR, and FT−IR, the structure of synthetic compounds was characterized in detail. Concerning about the (1-methylimidazolium)(tetrazol-1-yl)borane, it had an ignition−delay time of about 25 ms and a density specific impulse over 351 s·g/cm3, making it a suitable candidate for green hypergolic fuels. Moreover, it also demonstrated that introducing tetrazole into the borane could be an appropriate strategy to adjust the performance of the energy of those borane compounds.

chemistry, multidisciplinary,biochemistry & molecular biology
From Heart Drug to Propellant Fuels: Designing Nitroglycerin-Ionic Liquid Composite As Green High-Energy Hypergolic Fluids

Zhi Wang,Binshen Wang,Yang Guo,Yunhe Jin,Lihan Fei,Shi Huang,Wenquan Zhang,Chenglong Tang,Qinghua Zhang

DOI: https://doi.org/10.1016/j.combustflame.2021.111597

IF: 4.4

2021-01-01

Combustion and Flame

Abstract:New-generation green bipropellants based on ionic liquids for aircraft have attracted the attention of researchers. However, the major defects of ionic liquid propellants are their low specific impulse and incomplete combustion, which limits their practical application. In this work, a series of novel hypergolic fluids were prepared by mixing oxygen-rich nitroglycerin (NG) with fuel-rich dicyanamide-based ionic liquids. The complete dissolution of NG in ionic liquids makes these hypergolic fluids became selfsupplying oxygen composite fuels, which generate much less solid residual products than pure hypergolic ionic liquids (HILs). Moreover, the addition of NG inhibited the micro-explosion between fuel and white fuming nitric acid (WFNA), extended the contact time between fuel and oxidizer. And a proper amount of NG in the fuel could suppress the secondary combustion. These composite fuels have high density ( > 1 g cm -3 ), low viscosity (as low as 13.49 cP), wide liquid operating ranges and acceptable ignition delay time. Additionally, the specific impulses of the composite fuels were higher than pure HILs. For the first time, this work provides a simple and reliable method to control the ignition properties of HIL by adding oxygen-enriched additives. (c) 2021 The Combustion Institute. Published by Elsevier Inc. All rights reserved.
Trialkylsulfonium Thiocyanate Ionic Liquids: Investigation on Temperature‐Dependent Ignition Behavior of Green Hypergolic Propellants

Sophie C. Stölzle,Lennart Kruse,Dominic Freudenmann

DOI: https://doi.org/10.1002/prep.202400151

IF: 2.134

2024-10-16

Propellants Explosives Pyrotechnics

Abstract:Three trialkylsulfonium thiocyanate ionic liquids (ILs) are presented as fuel candidates for novel green hypergolic propellants. The physical and chemical properties such as density, viscosity, melting point and decomposition temperature as well as the enthalpy of formation of the ILs were determined. Further, the research focused on the potential of the ILs as fuel components for hypergolic propellants with highly concentrated hydrogen peroxide as oxidizer. For this, the theoretical maximum specific impulses of the propellants were calculated with NASA CEA. To evaluate the ignition delay times of the hypergolic propellants, drop tests were carried out. These were conducted not only at ambient conditions but also at lower levels of fuel temperature. It was found that all three propellant combinations still ignited reliably at temperature levels down to −25°C, however, the average ignition delay increased at lower temperatures. Overall, not only three promising hypergolic fuels were identified, but also important insights into the temperature‐dependent ignition behavior of hypergolic ionic liquid‐based propellants with thiocyanate anions were obtained.

engineering, chemical,chemistry, applied
Cyanoborohydride-Based Ionic Liquids As Green Aerospace Bipropellant Fuels

Qinghua Zhang,Ping Yin,Jiaheng Zhang,Jean'ne M. Shreeve

DOI: https://doi.org/10.1002/chem.201402704

2014-01-01

Chemistry - A European Journal

Abstract:In propellant systems, the most common bipropellants are composed of two chemicals, a fuel (or reducer) and an oxidizer. Currently, the choices for propellant fuels rely mainly on hydrazine and its methylated derivatives, even though they are extremely toxic, highly volatile, sensitive to adiabatic compression (risk of detonation), and, therefore, difficult to handle. With this background, the search for alternative green propellant fuels has been an urgent goal of space science. In this study, a new family of cyanoborohydride-based ionic liquids (ILs) with properties and performances comparable to hydrazine derivatives were designed and synthesized. These new ILs as bipropellant fuels, have some unique advantages including negligible vapor pressure, ultra-short ignition delay (ID) time, and reduced synthetic and storage costs, thereby showing great application potential as environmentally friendly fuels in bipropellant formulations.
One-dimensional copper bromide based inorganic-organic hybrids as fuels for hypergolic bipropellants with hydrogen peroxide as oxidizer

Ya-Jie Wang,Xu-Yang Wang,Hong Xu,Wei-Wei Ren,Rui Pang,Li Yang,Wen-Chao Tong,Qian-You Wang,Shuang-Quan Zang

DOI: https://doi.org/10.1016/j.cej.2022.140587

IF: 15.1

2023-01-01

Chemical Engineering Journal

Abstract:In this work, a series of unprecedented one-dimensional (1D) copper bromide-based inorganic–organic hybrids were synthesized as hypergolic fuels. In the absence of promoters, all 1D hybrids exhibited good hypergolic activity toward oxidant HTP (H2O2 with concentration of >95 %). Among the hybrids, the 1-propargyl-3-methylimidazolium bromide-based complex achieved the shortest ignition delay (ID) of 12 ms. The structure-performance relationships revealed that the abundant copper alkynyl bonds distributed in the 1D infinite Cu-Br chain functioned as interconnecting hotspots, which greatly promote the hypergolic efficiency. This work demonstrates that the hybrids combined with HTP have potential applications as green hypergolic bipropellants for rocket.

engineering, chemical, environmental
Synthesis and properties of borane‐containing ionic liquids based on biferrocene

Wei‐Ming Liu,Cheng‐Sheng Zhou,Cai‐Xia Lin,Jian‐Feng Yan,Yao‐Feng Yuan

DOI: https://doi.org/10.1002/aoc.6498

IF: 3.9

2021-10-29

Applied Organometallic Chemistry

Abstract:To develop a new type of energetic ionic liquid (EIL) that has a catalytic effect on the thermal decomposition of ammonium perchlorate (AP) and can be ignited in white fuming nitric acid (WFNA), six borane‐containing ionic liquids based on biferrocene were successfully synthesized, and their structures were determined by x‐ray crystallography. Except for iodized salts, four EILs with high thermal stability burned rapidly in WFNA, one of which, bis[1‐(ferrocenylmethyl)imidazole‐3‐yl] dihydroboronium cyanoborohydride, [Fcmim][BH3CN], produced the shortest ignition delay (ID) time of 5 ms. However, iodized salts demonstrated a better catalytic effect on AP than did BH3CN−‐ or N(CN)2−‐based EILs and bis[1‐(ferrocenylmethyl)benzimidazole‐3‐yl] dihydroboronium iodide, [Fcbemim][I], could advance the final thermal decomposition temperature of AP by 50°C. Anions have a significant effect on the structures and performances of ionic liquids. Six borane‐containing energetic ionic liquids based on biferrocene with high thermal stability and perfect redox reversibility were successfully synthesized. Anions have a significant effect on the structures and performances of ionic liquids.

chemistry, inorganic & nuclear, applied
Experimental Study on Hypergolic Ignition and Non-Ignition for Dicyanamide-Based Ionic Liquids at Low Impact Velocity Conditions

Yang Liu,Yang Guo,Li-han Fei,Zhao-ming Mai,Cheng-long Tang,Zhi Wang,Ying-tao Wu,Zuo-hua Huang

DOI: https://doi.org/10.1016/j.enmf.2021.08.004

2021-01-01

Energetic Materials Frontiers

Abstract:Ionic liquids have a wide engineering application foresight due to their easy and safe storage and handling while are limited by the unclear mechanism of hypergolic ignition. In this study, three dicyanamide-based ionic liquids with different cations, 1-allyl-3-methyl imidazolium ([AMIm]), 1-ethyl-3-methylimidazolium ([EMIm]) and 1-butyl-3-methyl-imidazolium ([BMIm]), are prepared to react with white fuming nitric acid through drop tests. The diameter of ionic droplet is 2.2 mm, the impact velocities are controlled at 0.16/0.45/0.62/0.82/1.01 m s-1 by adjusting the dropping height, and the whole reacting process is recorded by three cameras to provide macroscopic, microscopic and infrared details. The promotion effect of impact velocity on hypergolic ignition probability is confirmed for all the ionic liquids, and the minimum impact velocity for successful hypergolic ignition of each ionic liquid was determined. The temperature evolution of hypergolic process shows a non-monotonic trend, and a four-stage process was performed to reveal the hypergolic mechanism. The experimental results indicate that short-chain alkyl and unsaturated substituents in cations are favored for hypergolic ignition, and the datasets are conducive for kinetic model construction.

Bis(borano)hypophosphite-based Ionic Liquids As Ultrafast-Igniting Hypergolic Fuels

Exploiting Hydrophobic Borohydride-Rich Ionic Liquids As Faster-Igniting Rocket Fuels

Coulomb Explosion and Ultra-Fast Hypergolic Ignition of Borohydride-Rich Ionic Liquids with WFNA

Borohydride Ionic Liquids as Hypergolic Fuels: A Quest for Improved Stability

Synthesis and hypergolic properties of flammable ionic liquids based on the cyano (1H-1,2,3-triazole-1-yl) dihydroborate anion.

Synthesis and characterization of hypergolic salts based on bis(1H-1,2,3-triazole-1-yl) dihydroborate anion

Towards N-Alkylimidazole Borane-based Hypergolic Fuels

Experimental Observation of Hypergolic Ignition of Superbase-Derived Ionic Liquids

Boron based hypergolic ionic liquids: A review

Hydride- and boron-free solid hypergolic H2O2-ignitophores

Synthesis and Properties of Azide-Functionalized Ionic Liquids As Attractive Hypergolic Fuels.

Front Cover: Synthesis and Properties of Azide‐Functionalized Ionic Liquids As Attractive Hypergolic Fuels (chem. Asian J. 12/2019)

Low-Temperature Hypergolic Ignition of 1-Octene with Low Ignition Delay Time.

The Ignition Process Measurements and Performance Evaluations for Hypergolic Ionic Liquid Fuels: [emim][dca] and [Bmim][dca]

Preparation of the 1-Methylimidazole Borane/Tetrazole System for Hypergolic Fuels

From Heart Drug to Propellant Fuels: Designing Nitroglycerin-Ionic Liquid Composite As Green High-Energy Hypergolic Fluids

Trialkylsulfonium Thiocyanate Ionic Liquids: Investigation on Temperature‐Dependent Ignition Behavior of Green Hypergolic Propellants

Cyanoborohydride-Based Ionic Liquids As Green Aerospace Bipropellant Fuels

One-dimensional copper bromide based inorganic-organic hybrids as fuels for hypergolic bipropellants with hydrogen peroxide as oxidizer

Synthesis and properties of borane‐containing ionic liquids based on biferrocene

Experimental Study on Hypergolic Ignition and Non-Ignition for Dicyanamide-Based Ionic Liquids at Low Impact Velocity Conditions