Abstract:Optimization of three-dimensional (3D) print conditions for material extrusion of plastics by fused filament fabrication typically involves trade-offs between mechanical properties and dimensional accuracy due to their orthogonal requirements. Increased polymer mobility improves the mechanical properties by chain diffusion to strengthen the interfaces between printed roads, but flow associated with the high polymer mobility leads to inaccuracies. Here, we describe the application of a model core–shell geometry in filaments to address these trade-offs and understand the material requirements to achieve improved dimensional accuracy. Systematic variation of the core with commercial polycarbonate-based plastics and a common high-density polyethylene (HDPE) shell illustrates that tensile properties obtained with these filaments are relatively insensitive to printing conditions and selection of the core polymer, but the dimensional accuracy of the printed part improves markedly as the glass transition temperature of the core polymer increases. The impact resistance of the core–shell-based parts is dependent on the selection of the core polymer with a significant decrease in impact resistance for the lowest modulus core examined. Although warping can be mostly mitigated with the core–shell filaments, the printed object is generally smaller than the digital source due to large volume change associated with HDPE crystallization. The dimensional accuracy is dependent on the solidification temperature and mechanical properties of the polymers comprising the filament, print conditions, and the local geometry of the object as quantified by layer-by-layer analysis of 3D scanned images of the printed objects. Both processing changes and some structures in the digital object that can degrade the dimensional accuracy are identified through this analysis. The core–shell filament structure represents a model geometry to understand the potential for the printing of polymer blends where separation of solidification temperatures in cocontinuous blends could provide a route to improve performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsapm.1c00110?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsapm.1c00110</a>.Additional experimental protocols, filament cross-sections, DSC thermograms, images and characterization of printed impact bars, local deviations in dimensions between print and digital source, raw impact data, void fraction analysis, and tensile stress–strain curves (<a class="ext-link" href="/doi/suppl/10.1021/acsapm.1c00110/suppl_file/ap1c00110_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

The Adaptive Slicing Algorithm and Its Impact on the Mechanical Property and Surface Roughness of Freeform Extrusion Parts

Build Orientation Optimization for Extrusion-Based Additive Manufacturing Coupling with Adaptive Slicing

Quantitative Analysis of Surface Profile in Fused Deposition Modelling

Interfacial Bonding During Multi-Material Fused Deposition Modeling (FDM) Process Due to Inter-Molecular Diffusion

Optimization of FDM Process Parameters for Mechanical Properties of Aerospace Parts Based on Kriging and CS

Fused Deposition Modeling Five-Axis Additive Manufacturing: Machine Design, Fundamental Printing Methods and Critical Process Characteristics

Numerical Simulation and Printability Analysis of Fused Deposition Modeling with Dual-Temperature Control

Curved-layered Material Extrusion Modeling for Thin-Walled Parts by a 5-Axis Machine

Experimental Investigation and Numerical Simulations of Temperature and Morphology in Material Extrusion Additive Manufacturing

Study of Processing Parameters in Fused Deposition Modeling Based on Mechanical Properties of Acrylonitrile‐butadiene‐styrene Filament

Investigation on the improvement of mechanical properties and surface quality of the polylactic acid (PLA) fused filament fabrication parts manufactured without and with vibrations dependent utilization

Evaluation of the influence of ultrasonic vibration on physical, tensile, and morphological properties of fused deposition modeled specimens

An adaptive matrix material extrusion optimization model for in situ impregnated continuous fiber-reinforced 3D printing

Enhanced Dimensional Accuracy of Material Extrusion 3D-Printed Plastics through Filament Architecture

Analyzing Surface Roughness Variations in Material Extrusion Additive Manufacturing of Nylon Carbon Fiber Composites

Numerical Simulation and Experimental Study Regarding the Cross-Sectional Morphology of PEEK Monofilament Deposition During FDM-Based 3D Printing

The Impact of Various Filling Patterns and Building Orientations on the Mechanical Characteristics and Building Time of PLA Using FDM

Effect of process parameters of fused deposition modeling on mechanical properties of poly-ether-ether-ketone and carbon fiber/poly-ether-ether-ketone

An experimental analysis of mechanical properties for a dissimilar pattern structure in the 3-D printing of a PLA5F filament using the Taguchi method

Effective use of adaptive slicing in binder jetting using Taguchi method and surface roughness measurement with image processing

A polygons Boolean operations-based adaptive slicing with sliced data for additive manufacturing