Abstract:Porous copper surfaces show their great merits in the applications of chemical reaction, sound absorption and heat transfer. In this study, a laser micromilling method is proposed to fabricate porous surfaces with homogeneous micro-holes and cavities of the size about 1-15 mu m on pure copper plates in a one-step process. The laser micromilling was performed by a pulsed fiber laser via the multiple-pass reciprocating scanning strategy. Based on the measurement of scanning electron microscope (SEM) and 3D laser scanning confocal microscope, the formation of surface structures was investigated together with the laser ablation mechanisms. The effects of laser processing parameters, i.e., laser fluence, scanning speed, number of scanning cycles and scanning interval, on the formation and surface morphology of porous surfaces were systematically assessed. Furthermore, the wettability of the porous copper surfaces was also evaluated by measuring the static contact angle of water. The results showed that the laser fluence played the most significant role on the formation of porous copper surfaces. The average depth and surface roughness of porous copper surfaces increased with increasing the laser fluence and number of scanning cycles while decreased with the increase in scanning interval. The scanning speed played little influence on the formation of porous copper surfaces. These results can be closely related to the variation of energy density and re-melting process during the laser micromilling process. Moreover, all the copper porous surfaces were found to be hydrophobic. The contact angle of porous copper surfaces was significantly dependent on laser fluence, but weakly affected by the scanning speed and number of scanning cycles. (C) 2017 Elsevier Inc. All rights reserved.

Experimental Investigation on Surface Wettability of Copper-Based Dry Bioelectrodes

Fabrication of a Novel Superhydrophobic and Superoleophilic Surface by One-Step Electrodeposition Method for Continuous Oil/water Separation

Experiment Study of Laser Thermal Enhanced Electrochemical Deposition

Wettability of Stearic Acid Modified Chrome Oxide Layer on Copper Substrate

Electrodeposited Surfaces with Reversibly Switching Interfacial Properties.

Wettability Conversion of Ultrafast Laser Structured Copper Surface

Fabrication of Porous Copper Surfaces by Laser Micromilling and Their Wetting Properties

Achieving of Bionic Super-Hydrophobicity by Electrodepositing Nano-Ni-pyramids on the Picosecond Laser-Ablated Micro-Cu-cone Surface

Research on Metal Corrosion Resistant Bioinspired Special Wetting Surface Based on Laser Texturing Technology: A Review

Acid and Alkali Resistance of Hydrophobic Copper Surfaces Prepared by Laser Shock Imprinting (LSI)

Biomimetic Surfaces with Hierarchical Structure Using Microsized Texture and Nanosized Cu Particles for Superhydrophobicity

Altering the surface wettability of copper sheet using overlapping laser shock imprinting

UV Laser-Ablated Cu Superwetting Surface with Improved Anti-Icing and Antibacterial Properties

Fabrication of biomimetic superhydrophobic surface with controlled adhesion by electrodeposition

Fructus Xanthii-Inspired Low Dynamic Noise Dry Bioelectrodes for Surface Monitoring of ECG

Wettability and Color Change of Copper by Controlling Area Fraction of Laser Ablated Surface

Assembly of Self-Cleaning Electrode Surface for the Development of Refreshable Biosensors

Effect of Pulse Frequency on the One-Step Preparation of Superhydrophobic Surface by Pulse Electrodeposition

Wettability regulation from superhydrophilic to superhydrophobic via nanosecond laser ablation

A Fast and Green Method Based on Electroplating from Ethaline Electrolyte to Fabricate Superhydrophobic Surface for Corrosion Protection of Copper

Superhydrophobic and Superoleophobic Surface by Electrodeposition on Magnesium Alloy Substrate: Wettability and Corrosion Inhibition