Abstract:Immersion direct contact cooling effectively transfers heat from electronic components to a cooling solution without additional thermal resistance, due to its high energy density, low power consumption, system simplicity, and integrated thermal management for electronic devices. Current scholarly research on immersed structures predominantly focuses on surface temperature effects, with a scant investigation into internal flow and temperature field distributions concerning boundary layers. This study addresses structural optimization in immersion cooling systems, employing experimental and simulation methods to elucidate the thermal mechanisms by which structural optimization impacts the performance of chip immersion cooling systems. The research examines the impact of panel spacing and liquid level height on the thickness of velocity and thermal boundary layers, as well as the combined effects of natural and forced convection under three distinct cooling modes. Analysis reveals that heat pipe immersion cooling can reduce the heat source junction temperature to 40.7 °C under a 60 W power dissipation, a 47.2 % decrease from the bare heat source temperature. Reducing panel spacing disrupts the thermal boundary, enhancing forced convection and lowering the junction temperature by up to 10.1 % (6.5 °C). As liquid level height increases, the junction temperature initially decreases and then rises, with an optimal height of 175 mm for the best overall heat transfer effect. At low flow velocities (0.04 m/s), the vertical buoyancy-induced flow velocity at the heat source surface (24.2 × 10 -6 m/s) exceeds the horizontal forced convection velocity (0.78 × 10 -6 m/s), indicating that buoyancy changes due to density differences are significant and must be considered.

Study and Design of A Heat Dissipation System in A Junction Box for Chinese Experimental Ocean Observatory Network

Research on Heat Dissipation Mechanism of the Power Supply in Seafloor Observation Network Junction Box

Design of Temperature Testing System in Multi-Parameter Combined Environmental Test

Key technologies of junction boxes for Chinese experimental ocean observatory networks

Design And Simulation Of Heat Dissipation System For Hv Power House Of The Seafloor Junction Box

Power system design for constant current subsea observatories

Developing a Power Monitoring and Protection System for the Junction Boxes of an Experimental Seafloor Observatory Network.

Technologies of Junction Box for Seafloor Observation Network

Development of Power Management System Based on Seafloor Observatory Network Junction Box

Simulation of Deployment Process of Junction Box

Design and Application of A Junction Box for Cabled Ocean Observatories

A Film-Type Pressure Self-Adaptive Watertight Junction Box in Deep-Sea Equipment

Analytical Modeling of Forced-Air Cooling Heatsink by Considering Air Temperature Rise in Channel and Coupling of Multiple Heat Sources

Design and Implementation of the Seabed Dynamic Environment Monitoring System Based on Ocean Observing Network

Simulation, Experimentation, and Collaborative Analysis of Adjacent Heat Exchange Modules in a Vehicular Cooling System

Design of Deep Seafloor Observatory Network Based on Underwater Junction Box

Study on 10 Kvdc Powered Junction Box for A Cabled Ocean Observatory System

Numerical and Experimental Study on the Heat Dissipation Performance of a Novel System

Experimental and numerical study of structural parameters on the heat transfer performance of submerged cooling system

Thermal Analysis on Active Heat Dissipation Design with Embedded Flow Channels for Flexible Electronic Devices

Mechanical Design of Scientific Instrument Interface Module in Cabled Seafloor Observatory