Abstract:Lithium ion batteries have a very wide application range. They can power up small electronic devices such as smart watches to larger electric vehicles. Due to its varied range of applications, they come in different packaging and in such battery packs, even when individual cell voltage exceeds by a few milli‐volts above 4.2 V, it may result in thermal runaway and explode the cell. During discharge cycle, cell imbalances hinder the use of battery to its full capacity. This in turn decreases the battery lifetime. The individual battery cells should be equalized on a regular basis to keep the imbalances to a minimum and to have a good battery life. The process of balancing the individual cell charges by measuring the cell State of Charge (SoC) and its voltage in a battery pack is known as Cell Balancing. This paper details an active cell balancing technique that uses a buck converter for balancing a series connected battery pack of lithium‐ion cells. The buck converter is constructed from two MOSFET switches, one turned on for charging the cells and the other one is used for discharging the cells. An algorithmic model that measures the individual cell voltages based on charge equalization is developed for a pack of series connected Li‐ion battery cells. The developed model is simulated using MATLAB for verifying its performance. It is found that this algorithmic model produces a state of charge of 2.5% among the cells in a short period as compared to the conventional cell balancing technique. This parameter directly defines the cell equalization time and thus it is found that the system responds faster. The results show that this method can self‐adaptively attain satisfactory performance within a limited equalizing period. Lithium‐ion batteries have a very wide application range. They can power up small electronic devices such as smart watches to larger electric vehicles. Due to its varied range of applications, they come in different packaging and in such battery packs, even when individual cell voltage exceeds by a few milli‐volts above 4.2 V, it may result in thermal runaway and explode the cell. During discharge cycle, cell imbalances hinder the use of battery to its full capacity. This in turn decreases the battery lifetime. The individual battery cells should be equalized on a regular basis to keep the imbalances to a minimum and to have a good battery life. The process of balancing the individual cell charges by measuring the cell state of charge (SoC) and its voltage in a battery pack is known as cell balancing. This paper details an active cell balancing technique that uses a buck converter for balancing a series connected battery pack of lithium‐ion cells. A buck converter along with a pair of MOSFET switches for each cell, one turned on for charging the cell and the other one turned on while discharging the cell is used in this experiment. An algorithmic model suitable for reconfigurable battery systems that measures the individual cell voltages and is developed for balancing a pack of series connected Li‐ion battery cells. The developed model is simulated using MATLAB for verifying its performance. A state of charge of 25% is maintained across the cells and when SoC value drops below this even a difference of 0.02% is sensed by the algorithm to initiate balancing function. This balancing is found to take 275 ms to balance three 3.7 V batteries and thus the model is found to respond faster. The results show that this method can self‐adaptively attain satisfactory performance within a limited equalizing period.

Cell Sorting for Parallel Lithium-Ion Battery Systems: Evaluation Based on an Electric Circuit Model

Study on Influence of Sorting Parameters to Lithium-Ion Battery Pack Life-Cycles Based on Cell Consistency

Using Self Organizing Maps to Achieve Lithium-Ion Battery Cells Multi-Parameter Sorting Based on Principle Components Analysis

Study on Modeling, Experimentation and State of Charge Estimation of Parallel Connected Lithium-ion Batteries

Individual Cell Fault Detection for Parallel-Connected Battery Cells Based on the Statistical Model and Analysis

Study on the thermal interaction and heat dissipation of cylindrical Lithium-Ion Battery cells

A Uniformity Sorting Strategy for Lithium-Ion Batteries Based on Impedance Spectroscopy

Towards Accurate and Efficient Sorting of Retired Lithium-ion Batteries: A Data Driven Based Electrode Aging Assessment Approach

A Facile Approach to High Precision Detection of Cell-to-Cell Variation for Li-ion Batteries

Stratified Sorting Method of Battery Module Considering SOH in Echelon Utilization

Draining Over Blocking: Nano‐Composite Janus Separators for Mitigating Internal Shorting of Lithium Batteries

An Expeditious and Simple Scheme for Measuring Self‐discharge Rate of Lithium Batteries

A 3D distributed circuit-electrochemical model for the inner inhomogeneity of lithium-ion battery

A novel sorting method for liquid metal batteries based on deep learning and sequential features

Calculating Available Charge and Energy of Lithium-Ion Cells Based on OCV and Internal Resistance

Parallel battery pack charging strategy under various ambient temperatures based on minimum lithium plating overpotential control

Non-invasive diagnosis of solid electrolyte interphase and charge transfers resistances for degraded lithium-ion batteries

Rapid Sorting and Regrouping of Retired Lithium-Ion Battery Modules for Echelon Utilization Based on Partial Charging Curves

Current Redistribution and Uneven Heat Generation in a Lithium-Ion Battery Pack with Cells of Initial Performance Difference

Investigation of active cell balancing performance for series connected lithium‐ion cells in electric vehicle applications

Faulty Characteristics and Identification of Increased Connecting and Internal Resistance in Parallel-Connected Lithium-Ion Battery Pack for Electric Vehicles