Abstract:The uniformity of the static magnetic field B0 is of prime importance for an MRI system. The passive shimming technique is usually applied to improve the uniformity of the static field by optimizing the layout of a series of steel shims. The steel pieces are fixed in the drawers in the inner bore of the superconducting magnet, and produce a magnetizing field in the imaging region to compensate for the inhomogeneity of the B0 field. In practice, the total mass of steel used for shimming should be minimized, in addition to the field uniformity requirement. This is because the presence of steel shims may introduce a thermal stability problem. The passive shimming procedure is typically realized using the linear programming (LP) method. The LP approach however, is generally slow and also has difficulty balancing the field quality and the total amount of steel for shimming. In this paper, we have developed a new algorithm that is better able to balance the dual constraints of field uniformity and the total mass of the shims. The least square method is used to minimize the magnetic field inhomogeneity over the imaging surface with the total mass of steel being controlled by an L1-norm based constraint. The proposed algorithm has been tested with practical field data, and the results show that, with similar computational cost and mass of shim material, the new algorithm achieves superior field uniformity (43% better for the test case) compared with the conventional linear programming approach.

Shape Optimization of Ferromagnetic Pole of A Ferromagnetic-Superconducting Mri Magnet

Optimization and D esign of M ulti-ring

Simulation and Optimization of a Permanent Magnet for Small-sized MRI by Genetic Algorithm

The Optimal Target Magnetic Field Method for Passive Shimming in MRI

Passive Shimming of A Superconducting Magnet Using the L-1-Norm Regularized Least Square Algorithm

Optimization and Design of Multi-ring Pole Pieces for Small-sized Permanent Magnetic Resonance Imaging Magnet

Three-Dimensional Optimal Shape Design Of Magnetic Pole In Permanent Magnet Assembly For Mri Taking Account Of Eddy Currents Due To Gradient Coil Field

Design of Shimming Rings for Small Permanent MRI Magnet Using Sensitivity-Analysis-Based Particle Swarm Optimization Algorithm

3-D Optimal Shape Design of Pole Piece in Permanent Magnet Mri Using Parameterized Nonlinear Design Sensitivity Analysis

Optimal Design of Completely Open Magnet for MRI

The Optimal Design Method Of Permanent Magnet Assemblies With Completely Open Architecture For Mri

Electromagnetic Design of MRI Superconducting Magnet Based on Novel Hybrid Optimization Methods

A Homogeneous Superconducting Magnet Design Using A Hybrid Optimization Algorithm

The Optimal Design of a 300~MJ Superconducting Magnet Using HTS Tapes

The Optimal Design Of A 300mj Superconducting Magnet Using Hts Tapes

Optimal Design for High-Field MRI Superconducting Magnet

Optimization in Design of Actively Shielded Whole-Body Open High-Field Superconducting Mri Magnet

A Hybrid Optimization Approach to Design of Compact Self-Shielded Super Conducting Magnetic Resonance Imaging Magnet System

Design of the Superconducting Main Magnet Based on Variable Density Method in Cylindrical MRI Scanner

Temperature Field Optimization of Nano-Magnetic Fluid Hyperthermia Device

The Application of Accurate Calculation of Magnetic Field Intensity in 1.5-T Superconducting MRI Magnet Design