Abstract:Abstract.A general method is presented for the rigorous solution of Eshelby’s problem concerned with an arbitrary shaped inclusion embedded within one of two dissimilar elastic half-planes in plane elasticity. The bonding between the half-planes is considered to be imperfect with the assumption that the interface imperfections are uniform.Using analytic continuation, the basic boundary value problem is reduced to a set of two coupled nonhomogeneous first-order differential equations for two analytic functions defined in the lower half-plane which is free of the thermal inclusion. Using diagonalization, the two coupled differential equations are decoupled into two independent nonhomogeneous first-order differential equations for two newly defined analytic functions. The resulting closed-form solutions are given in terms of the constant imperfect interface parameters and the auxiliary function constructed from the conformal mapping which maps the exterior of the inclusion onto the exterior of the unit circle.The method is illustrated using several examples of an imperfect interface. In particular, when the same degree of imperfection is realized in both the normal and tangential directions between the two half-planes, a thermal inclusion of arbitrary shape in the upper half-plane does not cause any mean stress to develop in the lower half-plane. Alternatively, when the imperfect interface parameters are not equal, then a nonzero mean stress will be induced in the lower half-plane by the thermal inclusion of arbitrary shape in the upper half-plane. Detailed results are presented for the mean stress and the interfacial normal and shear stresses caused by a circular and elliptical thermal inclusion, respectively. Results from these calculations reveal that the imperfect bonding condition has a significant effect on the internal stress field induced within the inclusion as well as on the interfacial normal and shear stresses existing between the two half-planes especially when the inclusion is near the imperfect interface.

Neutrality of an Elliptical Inhomogeneity in Finite Plane Elastostatics of Harmonic Materials

An Elliptical Incompressible Liquid Inclusion in a Compressible Hyperelastic Solid of Harmonic Type

A Necessary and Sufficient Boundary Integral Formulation for Plane Elasticity Problems

The Transient Responses of a Special Non-Homogeneous Magneto-Electro-elastic Hollow Cylinder for Axisymmetric Plane Strain Problem

Efficient Numerical Modeling of Hertzian Line Contact for Material With Inhomogeneities

Volatile sulphur compounds in exhaled air of dental students smoking the waterpipe: a nested case control study.

Symplectic elasticity for bi-directional functionally graded materials

Spherical nano-inhomogeneity with the Steigmann-Ogden interface model under general uniform far-field stress loading

Elastic analysis of the half plane inhomogeneity problem

Plane Stress Problems for Isotropic Incompressible Hyperelastic Materials

Green's functions for an anisotropic elastic matrix containing an elliptical incompressible liquid inclusion

Hyperelastic bodies under homogeneous Cauchy stress induced by three-dimensional non-homogeneous deformations

Elastic fields in two imperfectly bonded half-planes with a thermal inclusion of arbitrary shape

Elliptic rigid inclusion in soft materials of harmonic type

Stress Fields of A Spheroidal Inhomogeneity with an Interphase in an Infinite Medium under Remote Loadings

On singular behaviour in a plane linear elastostatics problem

The steady-state response of a three-phase elliptical inhomogeneity with interface slip and diffusion under an edge dislocation in the matrix

Identification of Cytokinin-Responsive Genes Using Microarray Meta-Analysis and RNA-Seq in Arabidopsis1[C][W][OA]

Remarks on Analytic Solutions in Nonlinear Elasticity and Anti-Plane Shear Problem

An Effective General Solution to the Inhomogeneous Spatial Axisymmetric Problem and Its Applications in Functionally Graded Materials

Inclusions in a Finite Elastic Body