Abstract:The relation between catalytic activity and the presence of oxides on the catalyst's surface has proven very complex, especially in the case of methane oxidation over Pd. While the metallic Pd surface and a thin, but at least two atomic layers thick, oxide film has been found catalytically active, a single-layer surface oxide or a too thick oxide film are both low-active. Unfortunately, under reaction conditions, the oxide tends to grow thick and deactivate. The reason for this deactivation is believed to be exposure of the PdO (100) surface, which does not have any suitable active sites for the methane adsorption and activation, in contrast to PdO (101) , which is exposed for thin films. In an attempt to limit the thickness of the oxide film, and hence stabilise the active PdO orientation, we have investigated the oxidation of thin PdAu films. The effects of different mixtures (25%, 50%, and 75% Au, respectively) and treatments on the oxidation and orientation of the alloy and oxide films were investigated. As intended, PdAu turned out to be significantly more difficult to oxidise compared to pure Pd. This effect was even stronger than expected. Depending on the sample temperature and the amount of Au present in the alloy, the orientation of the oxide is affected. At lower temperatures and Au concentration, the desired [301] oxide orientation (corresponding to the (101) planes being parallel to the sample surface) is favoured, while higher Au concentration favours the low-active [100] oxide orientation. Thus, PdAu might be a good candidate for methane oxidation if the Au concentration is low, probably below 25%. The larger lattice constant of Au compared to Pd might also affect the oxide orientation, so another choice of alloying material, e.g. PdPt, may also work to stabilise PdO [301] . Independent of the alloy composition, the sample temperature during oxide growth should be optimised in order to achieve an active oxide film.

Alloying Au Surface with Pd Reduces the Intrinsic Activity in Catalyzing Co Oxidation

Au–Pd Alloying-Promoted Thermal Decomposition of PdO Supported on SiO2 and Its Effect on the Catalytic Performance in CO Oxidation

Local Coordination and Ordering Engineering to Design Efficient Core-Shell Oxygen Reduction Catalysts

Biphasic Pd-Au Alloy Catalyst for Low-Temperature Co Oxidation

Optimising Surface D Charge of AuPd Nanoalloy Catalysts for Enhanced Catalytic Activity.

Bimetallic Au-Pd alloy catalysts for N 2O decomposition: Effects of surface structures on catalytic activity

High Catalytic Activity of Carbon Supported PdCu Alloyed Catalysts toward Oxygen Reduction Reaction

Optimizing the Synergy Between Alloy and Alloy-Oxide Interface for CO Oxidation in Bimetallic Catalysts.

Regulating and identifying the structures of PdAu alloys with splendid oxygen reduction activity for rechargeable zinc–air batteries

Maximizing the Synergistic Effect of PdAu Catalysts on TiO2(101) for Robust CO2 Reduction: A DFT Study

Pre-deposited Co nanofilms promoting high alloying degree of Pd Au nanoparticles as electrocatalysts in alkaline media

Alloying and oxidation of PdAu thin films

Pt–Au–Co Alloy Electrocatalysts Demonstrating Enhanced Activity and Durability toward the Oxygen Reduction Reaction

Synergistically Enhanced Oxygen Reduction Electrocatalysis by Subsurface Atoms in Ternary PdCuNi Alloy Catalysts

Catalytic Activity of Pd/Cu Random Alloy Nanoparticles for Oxygen Reduction.

First-principles Study of PdAu Segregation with CO Coverage

Au Promotional Effects on the Synthesis of H2O2 Directly from H2 and O2 on Supported Pd−Au Alloy Catalysts

Design of PdAu alloy plasmonic nanoparticles for improved catalytic performance in CO2 reduction with visible light irradiation

The Enhancement of CO Oxidation Performance and Stability in SO2 and H2S Environment on Pd-Au/FeOX/Al2O3 Catalysts

Dynamics of Pd Dopant Atoms inside Au Nanoclusters during Catalytic CO Oxidation

Atomic Layer Deposition on Pd Nanocrystals for Forming Pd-TiO 2 Interface Toward Enhanced CO Oxidation