Abstract:This article introduces a high-voltage (HV) compliant, energy-efficient current-mode stimulator featuring a proposed boost-based dynamic voltage supply (DVS) to minimize the voltage dropout. The stimulator employs an activate-on-demand asynchronous strategy, instructing the boost converter to generate the dynamically increased high voltage that tracks the electrode’s voltage drop, thus achieving a near-adiabatic stimulation. The strategy relies on measuring the boost’s varying voltage conversion ratio (VCR), which is facilitated by an 8-bit voltage ratio quantizer (VRQ) proposed in this article. Furthermore, the boost converter employs a low-power, fast-speed, HV gate driver (HVGD) to control its p-type power switch that connects the inductor to the HV output. This article also presents a dedicated digital circuit that generates the pulse signals for controlling the n-type power switch and the HVGD. This digital circuit is driven by a five-phase clock from a current-starved ring oscillator. A highly efficient rotationally symmetric level shifter is utilized for the ring oscillator’s output, translating its level and improving its rise/fall time. The boost converter reaches a peak efficiency of 90.2%, enabling the stimulator to achieve an end-to-end energy efficiency of up to 86% during a biphasic stimulation of 6 mA. The stimulator IC, fabricated using 0.18-m bipolar–CMOS–DMOS (BCD) technology, occupies a compact area of 2.16 mm 2 . It exhibits low static power consumption at 1.78 W, promising battery-powered implants with an extended lifetime and a reduced form factor.

Bipolar Steep Pulse Current Source for Highly Inductive Load

A Hybrid Power Supply Based on Capacitor and Battery for Accurate Regulation of the Pulsed High Current for Inductive Load

Performance Analysis of Single Phase High Step-Up Converter with Coupled Inductor Multiplier

Constant Voltage-clamping Bipolar Pulse Current Source for Transient Electromagnetic System

Energy recycling load system with a high gain DC-DC converter for ultra low voltage power supplies

Analysis of a Three-Coil Series-Parallel-Series Topology Based on Asymmetrical Factor Method in Inductive Power Transfer System for Misalignment with Constant Current Output

A Bipolar High-Voltage Pulsed-Power Supply Based on Capacitor-Switch Voltage Multiplier

An Inductor-Based and Capacitor-Free Bipolar Pulse Converter with Overvoltage Protection

A Low Noise Power Supply Based on Buck Converter for Current Regulation in an Inductive Load

A Compact High-Power Ultra-Wideband Bipolar Pulse Generator

Interleaved High Step-Up Converter with Coupled Inductor and Blocking Capacitor

High Step-Up/Down Switched-Capacitor Based Bidirectional DC-DC Converter

An Inductive Isolation-Based 10 kV Modular Solid Boost-Marx Pulse Generator

Inductor Current Step Control with Input Voltage Feedforward for Fast Load Transient of Energy Recycling DC Electronic Load

All-solid-state Pulse Adder with Bipolar High Voltage Fast Narrow Pulses Output

A Non-inductive Coil Design Used to Provide High-Frequency and Large Currents

Single-Phase AC–DC Converter With SiC Power Pulsation Buffer for Pulse Load Applications

Design and Testing of Bipolar Pulsed-Power Supply With High Efficiency and Power Density for Strategic Mineral Exploration

A High-Voltage-Compliant 86% Peak Efficiency Current-Mode Stimulator with Dynamic Voltage Supply for Implantable Medical Devices

Hybrid-PWM-Controlled Current-Fed Bidirectional Series Resonant Converter with Low Current Ripple and Wide Voltage Gain