Abstract:Relative Humidity (RH) is a physical parameter which reflects the degree of atmospheric dryness. It has wide applications in agriculture,biology,petrochemical fields,food-processing,medical treatment and Internet of Things (IOT) technology. Fiber-optic humidity sensors have attracted widespread attention from scholars due to their high-measurement accuracy, anti-electromagnetic interference,multiplexing,and distributed sensing. Especially, humidity sensors based on Fabry-Perot Interferometers (FPIs) have been widely valued for their high repeatability, compact size and highsensitivity. Various humidity sensors based on silica fiber-optic have been reported. In the majority of fiberoptic humidity sensors,however,the sensitivity of RH detection can be improved by coating hygroscopic materials. At the same time,because they are fragile and inflexible,silica optical fibers must be treated carefully. This increases the cost and complexity of the fabrication process. Therefore, it has great research significance and application value to study new materials and structures. In order to simplify the manufacture of sensor and obtain excellent humidity sensitivity,a composite humidity sensor based on Polymethyl Methacrylate (PMMA) -microsphere and Single-mode Fiber (SMF) is designed and fabricated. Since the Polymer Optical Fiber(POF) material is very easily heated to form a molten state. In this work,the proposed sensor can be fabricated with an electric soldering iron. When the soldering iron is heated to about 70 degrees C, place it 1 cm below the POF to slightly attach the POF to the SMF. Slowly rotate the heating source (i.e.,electric iron) to allow the POF to be evenly heated. A Fabry-Perot (F-P)cavity is formed between PMMA-microsphere and the fiber endface. It should be noted that adjusting the heat source temperature and distance between fiber-optic and heat source,the temperature of heating can be controlled in the heating process. Compared with the alcohol lamp heating method,the electric soldering iron heating method can provide a stable heating source and high safety factor in the experiment. And then, the humidity sensing characteristics of the sensor are theoretically and experimentally studied. When the external ambient humidity rises,the volume of PMMA-microsphere can expand after absorbing moisture from the surrounding. It causes the length of the F-P microcavity to grow. Then, the peak (or valley) of the F-P reflection spectrum shift toward longer wavelengths (i.e.,red-shift). Thus, the humidity sensing can be realized. To investigate the sensing performance of the designed sensor, a test system that includes a demodulator,a humidity box, and a personal computer is built. Firstly, humidity test experiments are performed when the RH increases from 30% to 80% at a step of 10%. The humidity experimental results show that the wavelength shifts approximately linearly with the humidity changing, and the linearity reaches 0.992 26. The sensitivity of the sensor is up to 173.36 pm/% RH in the humidity range of 30%similar to 80%. Meanwhile, the sensor is placed in the temperature box (NBD-M1200-10IC, NOBODY. China). The reflection spectra of the sensor with different temperature are acquired by a spectral acquisition with the range of 1 520 similar to 1 580 nm. Experimental results demonstrate that the interference spectrum has a red-shifted about 3.15 nm in the temperature range from 35 degrees C to 65 degrees C. The temperature sensitivity of the sensor is 105.07 pm/degrees C, and the linearity is 0.989 55. In the subsequent studies,we will consider cascading FBG in the proposed sensor to solve the problem that cross-sensitivity of temperature and humidity. Finally,the proposed sensor performs well,showing a superior stability and repeatability over the test cycles in the performance evaluation actualized. When relative humidity is 33% RH and 38%RH, the resonant wavelength of the reflection spectrum has a very small shift within 60 min. The maximum deviations are 0.08 nm and 0.09 nm, respectively. The results indicate that the proposed sensor can maintain good stability in a long-term working condition. In addition,the wavelength drift deviation of the three repeated experiments is small, and the sensitivities are 176.05 pm/% RH, 170.35 pm/% RH and 173.68 pm/% RH, respectively. The average humidity sensitivity of the three groups tests is 173.36 pm/% RH. The designed humidity sensor offers numerous advantages such as low cost, high-sensitivity,simple structure and easy fabrication, which has a wide application prospect in the field of biochemical,agriculture and environmental monitoring.

High-birefringence Microfiber Sagnac Interferometer Based Humidity Sensor

Fast Detection of Humidity with a Subwavelength-Diameter Fiber Taper Coated with Gelatin Film

A Humidity Sensor Based on a Singlemode-Side Polished Multimode–Singlemode Optical Fibre Structure Coated with Gelatin

A High-Temperature Humidity Sensor Based on a Singlemode-Side Polished Multimode-Singlemode Fiber Structure

High-Sensitivity and Fast-Response Humidity Sensor Based on a Simple Fiber-Tip Interferometer with Thin Agarose Gel Coating

High-Sensitivity Humidity Sensor Based on Microknot Resonator Assisted Agarose-Coated Mach-Zehnder Interferometer

Optical Fiber Relative Humidity Sensor Based on FBG Incorporated Thin-Core Fiber Modal Interferometer

High-sensitivity Relative Humidity Fiber-Optic Sensor Based on an Internal-External Fabry-Perot Cavity Vernier Effect.

High-sensitivity Fiber-optic Humidity Sensor Without Sensitizing Material Modification

Relative Humidity Sensor Based on S-Taper Fiber Coated with SiO 2 Nanoparticles

High-sensitive and Millisecond-Response All-Nanofiber-optic Humidity Sensor Using Evanescent Coupling

High Sensitivity Humidity Fiber-Optic Sensor Based on All-Agar Fabry–Perot Interferometer

Highly Sensitive Fiber Relative Humidity Sensor Based on Tip Michelson Interferometer With Agarose Gel Coating

A humidity sensor based on all-fiber Fabry-Perot interferometer formed by large offset splicing

Fiber optic humidity sensor based on silk fibroin interference films

Miniature and high-performance optical fiber relative humidity sensor based on Fabry-Perot structure interacting with hydroxyethyl cellulose

High sensitivity relative humidity sensor based on two parallel-connected Fabry–Perot interferometers and Vernier effect

Low-Temperature-Sensitive Relative Humidity Sensor Based on Tapered Square No-Core Fiber Coated with Sio2 Nanoparticles

High-sensitivity fiber-optic humidity sensor based on microfiber overlaid with niobium disulfide

Simple High-Sensitivity Optical Fiber Humidity Sensor.

Optical Fiber Interferometric Humidity Sensor by Using Hollow Core Fiber Interacting with Gelatin Film