Abstract:Micro-arc oxidation (MAO) has been an important surface treatment of Al alloys for surface hard-coating and corrosion protection. We used direct current (DC) as the power supply at a constant current density 10 A/dm(2) during 30-min MAO processing of 6061 Al alloy. The electrolyte bath contained 9.765 g/L Na2SiO3 added with 10-60 mL/L ammonia water. With increasing added ammonia water in electrolyte bath, anomalous layer-thickening was observed reproducibly. Average coating thickness increases three times from 44 mm (no addition) to 135 mm (60 mL/L added). At 30 mL/L ammonia water micro-hardness of MAO layer maximizes at 1070 HV. X-ray diffraction shows the increasing intensity of amorphous phase accompanying with layer thickening. SEM analyses depict that size of surface micro-pore reduces with increasing added amount of ammonia water. Cross-sectional micrographs reveal micro-pores with a continuous coating-substrate interface. Elemental mapping and line-scans indicate uniform distribution of Al, O, Si and Na through the thickness of coating. Corrosion current density is plausibly improved to 6.41 x 10(10) A/cm(2) by the addition of 60 mL/L ammonia water, whereas layer hardness is 840 HV. Anomalous thickening effect was not observed in case of surface layers micro-arc treated in ammonia water added electrolyte of sodium aluminate. In the later case no amorphous phase is observed in the MAO coating. The mechanism of anomalous thickening arises from the formation of amorphous surface-layer which entrapped large amount of solid debris formed during the discharging process and dispersing in electrolyte. The most significance of this highly corrosion-resistant thick and hard layer lies in the 66.7% energy budget when only 1/3 thickness is required. (C) 2016 Elsevier B.V. All rights reserved.

High Quality Oxide-Layers on Al-alloy by Micro-Arc Oxidation Using Hybrid Voltages

Effects of NaAlO2 on Structure and Corrosion Resistance of Microarc Oxidation Coatings Formed on AM60B Magnesium Alloy in Phosphate–koh Electrolyte

Anomalous Layer-Thickening During Micro-Arc Oxidation of 6061 Al Alloy

Study on Structure and Properties of Microarc Oxidation Coating Formed on AM60B Magnesium Alloy

The Effects of Na2WO4 Concentration on the Properties of Microarc Oxidation Coatings on Aluminum Alloy

Micro Arc Oxidation and Layer Characteristics of Binary Al-Si Alloys of Different Si Contents

Influence of Electrolyte Compositions on Structure and High-Temperature Oxidation Resistance of Microarc Oxidation Coatings Formed on Ti2AlNb Alloy

Effect of Pre-Anodized Film on Micro-Arc Oxidation Process of 6063 Aluminum Alloy

Effect of Several Inorganic Additives on Microstructure and Properties of Microarc Oxidation Coating on Aluminium Alloy

Correlation between Microstructural Properties and Electric Parameters of Micro-Arc Oxidation Coatings on 5052 Aluminum Alloys with Improving Wear and Corrosion Resistance

Effect of Voltage on the Microstructure and High-Temperature Oxidation Resistance of Micro-Arc Oxidation Coatings on AlTiCrVZr Refractory High-Entropy Alloy

The Rules Of Growth Of The Micro-Arc Oxidation Coating On Aluminum Alloy

Effect of Asynchronous Microarc Oxidation on Microstructure of Coatings

Micro-arc Oxidation Technique for Aluminum and Its Alloys

Influence of micro-arc oxidation on the microstructure and dielectric properties of anodic aluminum oxide

Growth behavior and insulation property of the oxide layer during micro-arc oxidation of aluminium in "soft" regime condition

Stable Discharge Mechanism in Microarc Oxidation and Processing in Phosphate Electrolytes

Comparison of Corrosion Resistance of Microarc Oxidation Coatings Prepared with Different Electrolyte Concentrations on AM60 Magnesium Alloy

Oxide ceramic coatings with amorphous/nano-crystalline dual-structures prepared by micro-arc oxidation on Ti–Nb–Zr medium entropy alloy surfaces for biomedical applications

Processing and Analysis of Micro-Arc Oxidation Coating on 319S Aluminum Alloy

Growth mechanism of oxide layer on Ti-6Al-4 V substrate with different surface topographies during the early stage of micro-arc oxidation